Norton Equivalent Circuit

[rafehi]

1. The problem statement, all variables and given/known data

See picture:

http://img88.imageshack.us/img88/8319/87671967.jpg

The answer is given as phasors
I = 0.3536\angle45
Z = 2.828\angle-45

2. Relevant equations



3. The attempt at a solution

ZL = jwL = 2j Ohms
ZC = -j/(wC) = -4j Ohms

Can't do it by zeroing the sources as there's a dependent source (if it's possible, we haven't been taught it).

So then we'll have to find both the open source voltage VOC and the short circuit current ISC, correct?

Starting with VOC with a node b/w the inductor and resistor (which is equal to VOC because there is no voltage drop through the resistor due to no current going through it):
(groud at bottom node)
VOC: \frac{Voc}{-4j} + \frac{Voc - 2}{2} = 1.5IL

IL = \frac{Voc - 2}{2}

Subbing in and arranging gives:

\frac{Voc}{-4j} = \frac{Voc - 2}{4}

Solving gives:
Voc = -1.414\angle45,

however I'm fairly sure it's wrong given the answers ( IZ != V).


I'm not sure how to find ISC because of the dependent current source. Have tried and can't get the correct answer - not sure if I'm going about it the right way.
i1 = top loop current
i2 = left loop
i3 = right loop

Taking positive to be CW,
i1 = 1.5iL
iL = i1 - i2

Therfore,
iL = 2i2

Loop two (left):
-2i2 - 4j (i2 - i3) = 2\angle0

Loop three (right):
2i3 - 4j (i3 - i2) = 0

Solving the two linear equations gives
i3 = iN = 2j

which isn't the correct answer.


Any help would be greatly appreciated...