PDA

View Full Version : Equilibrium


physicsss
Nov2-04, 09:37 PM
Two lightweight rods d = 23 cm are mounted perpendicular to an axle and at 180° to each other. (Fig. 11-24). At the end of each rod is a 700 g mass. The rods are spaced 40 cm apart along the axle. The axle rotates at 41 rad/s.

http://www.geocities.com/sinceury/11-24alt.gif


(a) What is the component of the total angular momentum along the axle?


(b) What angle does the vector angular momentum make with the axle? [Hint: Remember that the vector angular momentum must be calculated about the same point for both masses.]

physicsss
Nov3-04, 04:15 PM
No one can help? =(

marlon
Nov3-04, 04:45 PM
Well the quantity that you will need in order to answer your questions is the rotational inertia or moment of inertia given by:

I = \Sigma_{i} m_{i}r_{i}^2 r is distance between origin and position of the mass. Mass1 is the right hand side-rod and mass2 is the other one.

So we have (in the right units ofcourse) :

I = 0,7 * 0,23^2 + 0,7(0.4^2 + 0.23^2)

mass = 0.7 kg
d_1 = 0.23 m
d_2 = sqrt(0.4²+0.23²)

Then you need to find the designated formula's( as a function of I) for calculation your questions.

marlon

good luck

physicsss
Nov3-04, 11:31 PM
So I calculated the angular around the center of mass:

L=I*w
L=0.7*v*r, and v=d*w

So L=0.7*0.23*41*sqrt(0.4²+0.23²)

So the total angular momentum is 2 times the above...but I was told that it's wrong. Any ideas?

marlon
Nov4-04, 05:44 AM
So I calculated the angular around the center of mass:

L=I*w
L=0.7*v*r, and v=d*w

So L=0.7*0.23*41*sqrt(0.4²+0.23²)

So the total angular momentum is 2 times the above...but I was told that it's wrong. Any ideas?

Well that is because the I that i calculated is not with respect to the center of mass but with respect to the origin.

If we calculate with respect to the centre of mass(positioned at the intersection of the diagonal between the two masses and the axis.) you would get :

I = 0.7*(0.2^2 + 0.23^2) + 0.7*(0.2^2 + 0.23^2)

marlon

physicsss
Nov4-04, 09:37 AM
If you times that by the angular speed of the rod, then you would get the answer for a, right? But I got it wrong...

marlon
Nov4-04, 10:36 AM
yes, what should you get ??? what is the answer ??? Normally it should work

marlon

physicsss
Nov4-04, 11:18 AM
I don't know, but the online homework submission thingy is not accpting my answer. =( Also, I'm getting different answers with the way you did it and the way I did it...

marlon
Nov4-04, 03:35 PM
Look you are gonna have to be more specific here. What did you get ???

marlon

marlon
Nov4-04, 03:53 PM
Sorry, but i made a mistake in the distance from the two masses to the axis. In the formula for I the r represents the PERPENDICULAR distance to the axis so this is just 0,23 meters.

I = 0.7 * 0.23^2 + 0.7 * 0.23^2

try this one

marlon

marlon
Nov4-04, 05:15 PM
Am i right now ???

maybe someone else can help us out here...

marlon

physicsss
Nov4-04, 09:33 PM
nope =( Can someone jump in and help?

marlon
Nov5-04, 04:53 AM
So I calculated the angular around the center of mass:

L=I*w
L=0.7*v*r, and v=d*w

So L=0.7*0.23*41*sqrt(0.4²+0.23²)

So the total angular momentum is 2 times the above...but I was told that it's wrong. Any ideas?

But it is just L = I * w and w = 41 rad/sec. Just multiply the two...

marlon