How to dissect a hdd spindle motor Sankey

  • Thread starter Thread starter julee
  • Start date Start date
  • Tags Tags
    Hdd Motor
Click For Summary
SUMMARY

The discussion focuses on disassembling a Seagate ST31276A HDD spindle motor, specifically the "Sankey" model. Users recommend using a probe, such as a screw, to dislodge the spindle from the HDD chassis by striking it against a hard surface. This method allows access to the internal components, including coils and magnets. The spindle is press-fitted into the chassis, necessitating a forceful approach for removal.

PREREQUISITES
  • Understanding of HDD components and assembly
  • Familiarity with basic mechanical tools
  • Knowledge of the Seagate ST31276A specifications
  • Experience with disassembly techniques for electronic devices
NEXT STEPS
  • Research the internal structure of Seagate ST31276A HDDs
  • Learn about the properties and functions of spindle motors
  • Explore safe disassembly techniques for electronic components
  • Investigate the role of Hall effect sensors in spindle motors
USEFUL FOR

Electronics enthusiasts, hardware repair technicians, and individuals interested in HDD mechanics and disassembly techniques.

julee
Messages
9
Reaction score
0
How to dissect a hdd (seagate Mod. ST31276A) spindle motor "Sankey"?

I have a spindle motor of seagate( Mod. ST31276A about 6 GB) It motor is "sankey" made in Japan . I wonder how to disassemble it(to see the coils, magnet,halls, etc). If some people can help me ..I will appreciate a lot.
Thanks. :confused:
 
Last edited:
Engineering news on Phys.org
what size HD was it from?
 
The spindle is press-fitted into the chassis.

Get something you can use as a probe (just use a screw or something), hold it underneath the spindle, and smack the whole lot down onto a hard surface. The spindle should pop out of its location in the HDD chassis, then you'll be able to see the motor.

If this isn't what you're after, let us know.
 

Similar threads

How does a Permanent capacitor motor actually work?
  • · Replies 7 ·
Replies
7
Views
2K
Series motors, switched to parallel
  • · Replies 15 ·
Replies
15
Views
3K
Building a three phase motor -- figuring out how many poles
  • · Replies 22 ·
Replies
22
Views
6K
RAID5 SSD: Pros & Cons of Replacing Failed HDD w/SSD
  • · Replies 30 ·
2
Replies
30
Views
7K
Tubular permanent magnet linear motors
  • · Replies 1 ·
Replies
1
Views
6K
How does this unusual motor work?
  • · Replies 9 ·
Replies
9
Views
3K
How Do I Build a Controller for a Brushless HDD Motor for an RC Car Experiment?
  • · Replies 1 ·
Replies
1
Views
3K
How Many Turns for a 48V 40-60A eBike Motor Using 10AWG Wire?
  • · Replies 1 ·
Replies
1
Views
2K
Axial flux alternators and motors design?
  • · Replies 2 ·
Replies
2
Views
5K
Will Adding a Second Generator Increase Power Output?
  • · Replies 6 ·
Replies
6
Views
7K