Golden coloured paper in Satellites

  • Thread starter Thread starter Clausius2
  • Start date Start date
  • Tags Tags
    Paper Satellites
Click For Summary

Discussion Overview

The discussion revolves around the use of gold-colored paper, specifically gold-infused mylar, in satellite construction and the protective measures taken during assembly processes. Participants explore the reasons for these materials and the necessity of cleanroom environments in aerospace settings.

Discussion Character

  • Technical explanation
  • Conceptual clarification
  • Debate/contested

Main Points Raised

  • Some participants explain that the gold-infused mylar serves to reflect sunlight and prevent overheating of spacecraft, while also acting as a micrometeoroid shield.
  • Warren mentions that the mylar is referred to as multi-layer insulation (MLI) and protects metals from degradation by monatomic oxygen in the ionosphere.
  • Participants discuss the importance of cleanrooms to prevent contamination of sensitive satellite components, citing that even small particles can cause significant damage.
  • There is a comparison made between the assembly practices in aerospace and those in computer chip manufacturing, highlighting the need for cleanliness in both fields.
  • A later reply questions why contamination is more critical in satellites compared to aircraft like the F-16, suggesting that the latter's operational context makes it inherently "dirty."
  • Another participant notes that F-16s run on petroleum, which complicates cleanroom standards.
  • It is mentioned that astronauts' face shields contain a thin gold film to protect against solar and cosmic radiation.

Areas of Agreement / Disagreement

Participants generally agree on the purpose of the gold-infused mylar and the need for cleanroom environments, but there are differing views on the implications of contamination in different aerospace contexts, particularly between satellites and aircraft like the F-16.

Contextual Notes

Some assumptions about the operational environments of satellites versus aircraft remain unresolved, particularly regarding the extent of contamination and its effects on different systems.

Clausius2
Science Advisor
Gold Member
Messages
1,433
Reaction score
7
Maybe I'm not able to question about it in english. Hmmm... let's go.

Why are the satellites and their external structures like panels, covered with a golden coloured paper when they are assembled?. Don't laugh at me!. I really never knew the reason. Also, I have seen the research staff of aerospace laboratories being dressed like a surgeon. Why?

Why such isolation measures in assembling processes?

Thanks in advance
 
Physics news on Phys.org
It's actually gold-infused mylar shielding. It's the same sort of stuff that mylar baloons are made of, but with gold in place of aluminum. The main purpose of the gold foil is to reflect sunlight in order to keep the spacecraft from heating up. It also serves as a rudimentary micrometeoroid shield.

- Warren
 
Oh, as to your second question: clean rooms are used to prevent contimation of the spacecraft components by dust, hair, natural fibers, fingerprints, etc. It's essentially just a precautionary measure. You don't want to spend millions of dollars launching your satellite only to find out there's a fingerprint on a mirror or a piece of hair snagging a motor.

- Warren
 
Have you ever seen the people that make computer chips? They dress the same way, and for the same reason. It is to protect the very delicate, sensitive components of the satellite from contamination. Any little bit of dust or moisture (from breath) or microscopic bits of lint from clothing could do serious damage to some systems.

The problem is especially bad when the satelite is being sent to capture and analyze samples, such as rock and soil samples for the Martian Rovers, or samples of solar wind from the Genesis probe. Such probes must be very clean and before they start their collections. If a tiny bit of dried skin or a stray eyelash get into the Mars probes, it would send back readings that positively identify living tissue on the planet!
 
What Warren said is correct. The stuff is called MLI for multi-layer insulation. In addition to the two purposes he mentioned it also acts as a shield protecting vulnerable metals from degradation by monatomic oxygen which is present in the ionosphere.
 
Thanks Warren, Lurch and Enigma. I've chosen to quote Lurch:

lurch said:
They dress the same way, and for the same reason. It is to protect the very delicate, sensitive components of the satellite from contamination. Any little bit of dust or moisture (from breath) or microscopic bits of lint from clothing could do serious damage to some systems.

I've seen too some aircraft mechanics working on a F-16 in EADS, and they do not dress in the same way. The F-16 has high delicate electronic components, hasn't it?. Why dust or moisture can damage the systems you talked about? If I take up a transistor and breath near it, it works in the same way than before. About the panels and fingerprints, I understand how embarrassing would be that, Warren :eek: .
 
It would not be possible to service an F-16 in a cleanroom. The F-16 is already very very dirty from use by the time the aircraft mechanics work on it. To clean it up to cleanroom standards, before even beginning the repairs, would be unduly costly.

- Warren
 
F-16's run on petroleum, which seems to be somewhat incompatible with anything "clean".

On a side note, the face shields astronauts wear on space walks holds a thin gold film (most likely along many other various coatings). It helps protect the face and eyes from solar and cosmic radiation.
 

Similar threads

  • · Replies 3 ·
Replies
3
Views
2K
Replies
11
Views
4K
  • · Replies 3 ·
Replies
3
Views
3K
  • · Replies 19 ·
Replies
19
Views
11K
  • · Replies 21 ·
Replies
21
Views
7K
  • · Replies 11 ·
Replies
11
Views
6K
  • · Replies 12 ·
Replies
12
Views
5K
  • · Replies 20 ·
Replies
20
Views
8K
  • · Replies 152 ·
6
Replies
152
Views
12K
  • · Replies 2 ·
Replies
2
Views
11K