Physics Forums

Physics Forums (http://www.physicsforums.com/index.php)
-   Classical Physics (http://www.physicsforums.com/forumdisplay.php?f=61)
-   -   How to calculate energy density of mainspring? (http://www.physicsforums.com/showthread.php?t=666504)

lightspd Jan24-13 05:59 AM

How to calculate energy density of mainspring?
 
Hi,

How do I calculate the energy density of either a main-spring (like in a clock) or a motor-spring?
Can someone show me values put into the correct formula for something like steel?

I did find some material properties like this: http://www.engineeringtoolbox.com/yo...lus-d_417.html

The motor-spring I am interested in is a type like this: http://www.sdp-si.com/Gateway/D220-T183.htm


Secondly, I would like to experiment with various materials (composites especially). If I make a plank of this material, how can I measure its properties to be able to put it into the correct formula for energy density of such a spring (if made into a spring)? I would have to take into account the breaking-point of the material of course (i.e. I bend the plank and at some point it either snaps or buckles).

I did study mech. engineering for a coupple of years but it is 20 years ago and I am rusty ;-)
I have googled and read a lot but am still stuck. Most stuff only relates to compression-springs but I need to work out spring constant of basically a beam (?) and not sure of to work out the breaking point (of the clockspring) when I know that a certain material will snap when it is deflected a certain amount.



Thanks a lot.

Regards

lightspd Jan24-13 06:10 AM

Re: How to calculate energy density of mainspring?
 
A concrete example I would very much like to see is something like this:

Take an acrylic ruler. it is 30 cm long, 3 cm wide and 2mm thick. It weighs 20grams (just estimated for this example).
Acrylic has Youngs Modulus of 3.2 GPa and ultimate Tensile Strength of 70 Mpa (according to the page I posted ealier).

If I took this material and used 500cm of it and turned it into a mainspring (or motor-spring), then:

a) What is the energy density of the spring?

b) If I didn't have Youngs Modulus and Ultimate Tensile Strength, how could I work these out (and any other values that I might need)?


Thanks and regards

lightspd Jan31-13 03:07 AM

Re: How to calculate energy density of mainspring?
 
Bump!

Sorry I have cross-posted this in the coursework forum, many reads but no answers :-(
Is no one able to help me with this?
When I google, I only find articles related to compression springs. Why is it so difficult to find stuff on main-springs?

Can someone recommend a good book on the subject? Not interrested at all in compression-springs, only main-springs and tensator springs and the like.

Thanks.


All times are GMT -5. The time now is 02:40 PM.

Powered by vBulletin Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
© 2014 Physics Forums