Register to reply

How much heat can I get from the sun?

by zzinfinity
Tags: direct, gain, passive, solar heat
Share this thread:
zzinfinity
#1
Mar20-12, 09:30 PM
P: 47
Hi,
I'm a student doing a project that involves building a model house with passive solar heating system. I'm curious if there is a way to approximate the amount of heat I will absorb through a south facing window on a sunny day, in early April. I realize this depends on many variables, but I'm just looking for a ball park figure (10 BTUs, a billion BTUs?)

I'm in Boulder Colorado (North Latitude 40 degrees). The average high is about 55F.

Anyone have any thoughts? Thanks!
Phys.Org News Partner Science news on Phys.org
World's largest solar boat on Greek prehistoric mission
Google searches hold key to future market crashes
Mineral magic? Common mineral capable of making and breaking bonds
DaveC426913
#2
Mar20-12, 09:37 PM
DaveC426913's Avatar
P: 15,319
Quote Quote by zzinfinity View Post
Hi,
I'm a student doing a project that involves building a model house with passive solar heating system. I'm curious if there is a way to approximate the amount of heat I will absorb through a south facing window on a sunny day, in early April. I realize this depends on many variables, but I'm just looking for a ball park figure (10 BTUs, a billion BTUs?)

I'm in Boulder Colorado (North Latitude 40 degrees). The average high is about 55F.

Anyone have any thoughts? Thanks!
Here's a start.
http://en.wikipedia.org/wiki/Insolation
philrainey
#3
Aug3-13, 03:22 AM
P: 89
A airconditioning heat load program would be great otherwise you have to get charts for your Latitude showing the radiation intensities on a south wall, Note the amount of window in direct sunlight is affected by the overhang of the roof (which you would have to calculate, yes for each hour) The radiation intensities would be given in per square meter so the final result depends on how many square meters the wall is assuming nothing shades it. You would have to do the calculation for each hour for the differing intensities and work out the heat for each hour (Watts multiplied by seconds (3600) If I remember right there is a certain amount reflected by the glass and some absorbed and lost back to outside. (I think it depends on what type of glass)

mfb
#4
Aug3-13, 04:34 AM
Mentor
P: 11,589
How much heat can I get from the sun?

Bright sunlight has an intensity of roughly 1kW/m^2. Clouds (->weather data), other sources of shadows (->architecture) and surfaces not perpendicular to the sunlight (->architecture and latitude) will reduce this number for your house. In addition, the window will reflect some fraction of the sunlight (->glass properties).

For a ballpark figure, take a few hours of full sunlight and convert 1kW/m^2 to all sorts of strange unit systems if you like.
Aero51
#5
Aug6-13, 01:04 AM
P: 546
You need to know a few things:
1 - The relative angle of the sun and roof. This is insolation.

2 - The surface properties of the roof. Specifically the absorbtivity and reflectivity. This defines how the radiation behaves at the surface.

3 - The roof wall properties. This includes thickness and the conduction coefficient which defines how the heat propagates through the roof.

4 - Air properties of the house interior. This includes initial temperature and depending how complicated you want to get, conduction and convection coefficients.

You picked a complicated project. If this is for highschool I recommend something simpler.


If possible use statistical methods.


Register to reply

Related Discussions
Specific & Latent Heat - Heat required to turn water in Aluminum Tray -> Ice Introductory Physics Homework 9
Pool heat gain by solar radiation versus heat loss by evaporation General Physics 2
Equation measuring heat with temperature change, time and specific heat Classical Physics 7
Heat and Internal Energy and Heat and Temperature Change: Specific Heat Capacity Advanced Physics Homework 4
Speed of Bullet with specific latent heat of fusion and heat capacity [HELP ME PLEASE Advanced Physics Homework 1