Register to reply 
Pressure and transmission of pressure in liquids 
Share this thread: 
#1
Apr1312, 12:21 PM

P: 645

I understand that pressure is F/A. But whenever they ask me to find the pressure of a book acting on the table, since the object in question is actually the table so is the force the reaction force on the table by the book and not actually weight since weight is an internal force?
Again, with the hydraulic system information in my textbook a small force acting on a small piston gives rise to a large force in the large piston as the pressure is the same. But I'm quite confused as they say that a forfeit is exerted on the piston. I thought that the object that we have to take into perspective is the liquid? Also since my force is acting the piston that force's area has to be the same as the piston's or else the pressure won't be the same since P=F/A. I'm not very sure about this since all they say is the force on the piston so I don't quite understand it in detail. Lastly, pressure in a liquid acts at all directions. What does this mean? Does it mean that when I use P=hpg to get the pressure in the liquid (taking that there is no atmospheric pressure above) that pressure acts at all directions? But won't that mean that the force is infinite since the pressure acts at all direction so P=F/A is infinite as at one point upwards pressure is same as downwards. Thanks guys for the help! Hope to hear (or read) from you guys soon! 


#2
Apr1312, 02:02 PM

Sci Advisor
HW Helper
Thanks
P: 26,160

hi sgstudent!
(btw, weight is an external force … it comes from the Earth) the smaller piston moves a longer distance, so it can do the same work with less force so it's like a lever, where again the forces are inversely proportional to the distance moved 


#3
Apr1312, 02:38 PM

P: 1,414

I am puzzled how you managed introduce infinity. 


#4
Apr1312, 10:11 PM

P: 645

Pressure and transmission of pressure in liquids
Also for the other part, I meant that in a single point underwater pressure is outwards in all direction at that point right? So at the centre of it, from the left right up down the pressure is the same right? So won't the force be infinite? Thanks for the help guys! 


#5
Apr1412, 12:57 AM

Homework
Sci Advisor
HW Helper
Thanks
P: 9,645

Perhaps you mean the force you exert on the first piston is exerted over a smaller area than the area of the piston against the fluid? Irrelevant. You somehow exert a force F1 on the first piston. That piston spreads the force over an area A of fluid, generating pressure P = F1/A. The pressure is transferred throughout the fluid. At the second piston the pressure acts over area B, generating force F2 = P*B = F1*B/A. Regarding pressure at depth, consider a small cube, area C on each face. Force on each face F = C*P. As C tends to zero, F tends to 0, not infinity. 


#6
Apr1412, 03:33 AM

Sci Advisor
HW Helper
Thanks
P: 26,160

hi sgstudent!
the force on "our" end of the piston (where we're pushing it) is equal and opposite to the force on the water end of the piston the pressure is that force divided by the area of the piston … as you reduce the sphere to a point, the force reduces to zero (because the area reduces to zero, and the force is proportional to the area) btw, it you consider the force of the water on just one half of the sphere, that's calculated in exactly the same way as the force of your body on the spherical top of your femur … (http://www.arthursclipart.org/skelet...ip%20joint.gif) 


#7
Apr1412, 07:43 AM

P: 645

Oh, so the force acting on the piston is equal to the force acting on the water? Why is this so, since if I have a 10N force on the water there will be a reaction force of 10N on the piston so won't I have to apply 20N of force rather than 10N so I'm confused about this part.
Thanks for the help guys! BTW tiny Tim, you seem to be able to pick out the bits that I'm confused about really quickly, that's amazing! Thanks for the help! 


#8
Apr1412, 07:57 AM

Sci Advisor
HW Helper
Thanks
P: 26,160

usually there's two pistons, we push one, and the other pushes a wheel etc if we push the first piston with 10 N, the water pushes back on the first piston with 10 N at the other end, the same water pushes on the second piston with 20 N, and the water pushes back on the second piston with 20 N (so it's geared: we push the first piston, and the second piston moves half as far with twice the force) 


#9
Apr1412, 08:13 AM

P: 645

Huh, I don't understand the 'I push with 10N so the water push back with 10N part.' Why would the water push back with an equal but opposite force? Thanks for the help!



#11
Apr1412, 09:07 AM

P: 645

But if I push the piston down won't the reaction force be on my hand? I think I'm quite confused here the image I'm picturing looks sorta like this: http://science.howstuffworks.com/tra...hydraulic1.htm so I don't quite get the action reaction pair here..



#12
Apr1412, 09:37 AM

Sci Advisor
HW Helper
Thanks
P: 26,160

so the force from you on the top of the piston is mg and the force from the piston on you is also mg the force from the bottom of the piston on the water is mg and the force from the water on the piston is mg everything is mg (until you get to the other side of the water, where the diameter is different) 


#13
Apr1412, 10:56 AM

P: 645

Oh so the piston has no net force? Actually are you able to deduce these stuff just like this because previously in most dynamics question we treat two bodies differently like when I push a box across a table my hand is one object and the book as well so if I push 10N on the book there will be a reaction force of 10N so just from this information I don't really know about the other forces acting on my hand to balance the reaction force which is opposing me. So I'm pretty confused about this part here. Thanks for the help tiny tim!



#14
Apr1412, 11:04 AM

Sci Advisor
HW Helper
Thanks
P: 26,160

there's a 10 N force all the way along, finishing where you, or something, is pushing against the Earth 


#15
Apr1412, 12:20 PM

P: 645

Oh sorry for being vague. I mean like when I push a box with 10N, my hand experiences a 10N force too which is the N3L reaction force. But I'm not sure if the force I apply to my hand will be 10N or greater than 10N. So that's why I'm confused about why I can assume all the forces in the piston and the water like the weight example you gave just now. Thanks for the help!



#16
Apr1412, 12:49 PM

Sci Advisor
HW Helper
Thanks
P: 26,160

(this is because your hand is not accelerating, so if there's 10N on one side, there must be 10 N on the other side, net horizontal force 0) 


#17
Apr1412, 01:16 PM

P: 645

But how do I know if my hand is accelerating since I might apply even more force to counteract the reaction force such that my hand will accelerate at the same rate as the object in question. So I'm guessing that there is no one answer for this and it depends on the person? But then if this is so then how can the pressure in the piston like the wright example you gave be justified? Thanks for the help tiny tim!



#18
Apr1412, 02:08 PM

Sci Advisor
HW Helper
Thanks
P: 26,160

(as i said, the forces on either side of your hand will only be equal if there is no accceleration) (and in a water system like this, the acceleration would be very small anyway) 


Register to reply 
Related Discussions  
Example question on pressure of liquids  General Physics  6  
Pressure in liquids question  Introductory Physics Homework  2  
Pressure in liquids  Classical Physics  2  
Calculate pressure in liquids  General Physics  9  
Why is the pressure of two different liquids in a manometer the same?  General Physics  1 