Why does the liquid stay in the straw?

  • Thread starter itsthemac
  • Start date
  • Tags
    Liquid
In summary, the liquid stays in the straw when it is lifted up because of the pressure of the outside air pushing up on the liquid. The air pressure comes from the equivalent of 15 pounds per square inch pushing down, and when your finger is placed on the straw it cuts off the liquid from most of the air pressure. However, the pressure at the bottom of the straw remains at 1atm, creating equilibrium and allowing the liquid to stay in the straw. This is because the pressure in the water is determined by its height, and when the pressure reaches zero or the vapor pressure of water, the water will vaporize. The presence of a small air bubble does not significantly change the pressure and the water will still rise in the
  • #1
itsthemac
23
0
This might sound trivial, but I've always been curious as to why exactly when you put your finger on the top of a straw in a drink and lift it up, the liquid stays in it. We're studying pressure and fluids right now in my physics class, and I have a general idea that it has to do with the pressure of the outside air pushing up on the liquid in the straw. What I don't understand is exactly how to describe the whole thing. Shouldn't the pressure of the air in between the liquid and your finger be the same as it was before you put your finger on the straw? Does that pressure actually change at all just from enclosing it? And if it doesn't change, then wouldn't the same forces be acting on the liquid that were acting on it before you put your finger on it? thanks in advance
 
Physics news on Phys.org
  • #2
The air pressure comes from the fact that there's the equivalent of 15 pounds per square inch air pushing down due to the air pressure. When you put your finger on the straw, you've cut off the liquid in the straw from all but a few inches of air (whatever sits between your finger and the liquid). The air pressure from the top drops to almost nothing whereas the air pressure from the bottom is still the ol 1atm pushing up.
 
  • #3
Pengwuino said:
The air pressure comes from the fact that there's the equivalent of 15 pounds per square inch air pushing down due to the air pressure. When you put your finger on the straw, you've cut off the liquid in the straw from all but a few inches of air (whatever sits between your finger and the liquid). The air pressure from the top drops to almost nothing whereas the air pressure from the bottom is still the ol 1atm pushing up.

But if the air pressure at the top drops to almost nothing, shouldn't the water in the straw move upwards towards your finger a little bit the second you put your finger on the straw? I would also think that this would mean that if you tipped the straw upside-down (while keeping your finger on it), that the water would fall towards your finger. But this doesn't happen.
 
  • #4
itsthemac said:
But if the air pressure at the top drops to almost nothing, shouldn't the water in the straw move upwards towards your finger a little bit the second you put your finger on the straw? I would also think that this would mean that if you tipped the straw upside-down (while keeping your finger on it), that the water would fall towards your finger. But this doesn't happen.


There's air between your finger and the water, it can't be crushed anymore than if it were in a balloon!
 
  • #5
itsthemac said:
But if the air pressure at the top drops to almost nothing, shouldn't the water in the straw move upwards towards your finger a little bit the second you put your finger on the straw? I would also think that this would mean that if you tipped the straw upside-down (while keeping your finger on it), that the water would fall towards your finger. But this doesn't happen.

Wait wait no no, I didn't think that one through. The pressure doesn't drop to 0, it stays the same. Except now it's in equilibrium being pushed from below at 1atm and from above at 1atm.
 
  • #6
Pengwuino said:
Wait wait no no, I didn't think that one through. The pressure doesn't drop to 0, it stays the same. Except now it's in equilibrium being pushed from below at 1atm and from above at 1atm.

but if they're both at 1 atm, then shouldn't the force caused by the pressure pushing up on the liquid from the bottom and the force caused by the pressure pushing down on the liquid from the air in between the liquid and your finger cancel out? which would mean that the net force acting on the liquid in the vertical direction would just be the force of gravity? which should just pull it down and out of the straw?
 
  • #7
itsthemac said:
This might sound trivial, but I've always been curious as to why exactly when you put your finger on the top of a straw in a drink and lift it up, the liquid stays in it. We're studying pressure and fluids right now in my physics class, and I have a general idea that it has to do with the pressure of the outside air pushing up on the liquid in the straw. What I don't understand is exactly how to describe the whole thing. Shouldn't the pressure of the air in between the liquid and your finger be the same as it was before you put your finger on the straw? Does that pressure actually change at all just from enclosing it? And if it doesn't change, then wouldn't the same forces be acting on the liquid that were acting on it before you put your finger on it? thanks in advance

This is a good puzzle.

First, let's say there is *no* air space- the water completely fills the straw. Then, you can pull the straw up about 400 inches (atmospheric pressure is 408 inH2O = 760 mmHg = etc.) before a small vapor bubble will appear in the top: that's how Torricelli's experiment worked.

The key concept is that the pressure in the water anywhere along the length of the straw is given simply by the height. Once the pressure gets to zero (or the vapor pressure of water), the water will vaporize. Drawing the column up further will only make a larger region of vacuum.

Now we do this again, but there is a small region of air already present. There's no substantive difference between this case and the above- the pressure in the air bubble will go down as the straw is raised, but the water column will rise for the same reason it did before. Conversely, the pressure in the bubble will increase if the straw is submerged. The size of the bubble will change as the straw is raised and lowered because the pressure changes and air is compressible.
 
  • #8
itsthemac said:
which would mean that the net force acting on the liquid in the vertical direction would just be the force of gravity? which should just pull it down and out of the straw?
The moment the water starts to drop, it creates a low pressure area at the top. The force on the water is no longer in equilibrium. There is 1atm pushing up, but none pushing down. This is enough to compensate for gravity.
 
  • #9
Note, if there's air in the straw, then the water level doesn't quite rise as much as the straw, because the air in the straw expands as it's pressure decreases. It's a very small amount in the case of a straw, but if this were a huge tube, 20 meters tall, there would be a large decrease in pressure and a bit increase in expansion of the air.

The pressure of the water inside the straw at the same height as the top of the water outside the straw is 1 atm, and the pressure above that point decreases according to the formula, pressure(height) = 1 atm - ( density (of the water) x gravity (eg, 9.8m/s^2) x height (above 1 atm point) ).
 

1. Why does the liquid stay in the straw?

The liquid stays in the straw due to a scientific principle known as capillary action. This occurs when the adhesive forces between the liquid molecules and the straw are stronger than the cohesive forces between the liquid molecules. As a result, the liquid is able to move up the straw against the force of gravity.

2. How does capillary action work?

Capillary action is driven by the surface tension of the liquid, which is the cohesive force between liquid molecules at the surface. When the liquid comes into contact with a surface, such as the inside of a straw, the surface tension causes the liquid to cling to the surface and move upwards.

3. Does the size of the straw affect the liquid staying in it?

Yes, the size of the straw can affect the amount of liquid that is able to stay in it. A larger diameter straw will have a larger surface area for the liquid to cling to, allowing more liquid to be pulled up through capillary action. However, the liquid will still remain in the straw regardless of its size, as long as the adhesive forces are strong enough.

4. Why does the liquid not fall out of the straw when it is held upside down?

This is because of the cohesive forces between the liquid molecules. These forces act like a "chain" and keep the liquid molecules connected, preventing them from falling out of the straw even when it is held upside down. Additionally, the surface tension of the liquid also helps to keep it in the straw.

5. Can any liquid stay in a straw?

The ability of a liquid to stay in a straw depends on its adhesive and cohesive properties. In general, liquids with high surface tension, such as water, are more likely to stay in a straw compared to liquids with lower surface tension. However, the shape and material of the straw can also affect whether a liquid will stay in it or not.

Similar threads

Replies
12
Views
2K
Replies
15
Views
2K
Replies
5
Views
1K
  • Introductory Physics Homework Help
Replies
3
Views
435
  • Classical Physics
Replies
1
Views
6K
  • Engineering and Comp Sci Homework Help
Replies
9
Views
2K
  • Classical Physics
Replies
30
Views
3K
  • Classical Physics
Replies
5
Views
873
  • Materials and Chemical Engineering
Replies
6
Views
1K
Back
Top