Van De Graff Generator: Explanations to why object repel generator

In summary, the Van de Graff Generator works by separating insulating materials, resulting in surfaces with opposite charges and a high potential difference. When turned on, the positively charged dome repels positively charged pie pans, causing them to fly off. When foam peanuts are placed inside the pan, they become charged through conduction and are then repelled by the pan. When a person touches the generator, their body acts as a conductor and the positive charge moves to their hair, causing it to stand up. This is a demonstration of the principle that charge resides on the outer surface of a charged hollow conductor. Other examples of this principle include using a Faraday's cylinder or a bouncing ball suspended on a non-conducting thread. The electric wind
  • #1
jamba88
9
0

Homework Statement


a) Why do pie pans fly off the Van de Graff Generator when turned on?

b) When foam peanut are placed inside a pie pan with the Generator turned on, what causes the foam peanuts to fly out?

c) Why does a person's hair stand up when they touch the generator?


Homework Equations


No equations necessary


The Attempt at a Solution


I'm not sure if my answers are correct or if I'm elaborating enough. Like should I talk about conductors/insulators...charging by conduction/induction.

a) Since the van de graff generator's dome is positively charged and the the pie pans tend to be positively charged, then the pans fly off because like charges repel.

b) The foam peanuts are insulators. The van de graff generator transfers charge to the pan, leaving it positively charged. This is charging by conduction. The pan transfers the charge to the foam peanuts. The foam peanuts fly off the pan because they are both positively charged and so the peanuts repel the pan.

c) Hair stands up when a person touches the van de graff generator because the body is a conductor. Postive charge moves freely through the body into the hair making it stand up.
 
Physics news on Phys.org
  • #2
Yuo are quite right ...
van de graff Generator works on the principle: " when some insulating material is separated from others leave those surfaces electrically charged, each with the opposite sign of charge and with a high potential difference (p.d.).

So, at the bottom, the comb takes a High voltage negative charge viz converted by conduction into positive charge on the belt..

This belt carries the positive charge on the dome(sphere) and hence having inherent electrical capacity (proportional to its radius) will collect and store the charge on its outer surface until discharged either by breakdown of the surrounding air as a spark, or by conduction to an adjacent earthed object.

And as your experimental examples: Faraday’s cylinder to show electric charge resides on the outer surface of a charged hollow conductor.

Bouncing ball Suspend a conducting ball a non-conducting thread. When the ball touches the charging sphere, it will become charged and be repelled away from the sphere. If the ball is then allowed to discharge (touching an earthed surface, or leaking charge to the air) it will be attracted once more to the sphere, to be recharged ... and so the process continues.

The head of hair is another demonstration of repulsion. Real hair or shredded paper strips bunched at one end are used and provide a sensitive means of detecting charge.

The electric wind is produced by release of ions at the end of a pointed conductor and is enough to deflect a candle’s flame.

Hamilton’s mill utilizes the electric wind at the pointed ends of four arms to cause rotation about a pivot. This is similar to the action of a lightning conductor, which allows charge transfer at sharp points.

Kinetic theory model You can show random motion of metallic balls continuously affected by repulsion and loss of charge within a transparent vessel.

Neon indicator shows luminous discharge from the gaseous excitation by the high electric fields near the generator.
i hope this helps ..:-)
 

What is a Van De Graff Generator?

A Van De Graff Generator is a device that uses static electricity to create a high voltage difference between its top and bottom. It is made up of a moving belt, two metal comb-like structures, and a large metal sphere.

How does a Van De Graff Generator work?

The Van De Graff Generator works by using friction to transfer electrons from a moving belt to a metal sphere. This creates a build-up of static electricity on the sphere, causing a high voltage difference between the sphere and the ground.

Why do objects repel the Van De Graff Generator?

Objects repel the Van De Graff Generator because of the build-up of static electricity on the metal sphere. This creates an electric field around the sphere, and objects with like charges will repel each other.

What materials can be used to create a Van De Graff Generator?

The main materials used to create a Van De Graff Generator are a rubber belt, metal combs, and a metal sphere. However, other materials such as aluminum foil, PVC pipe, and a plastic container can also be used to create a homemade Van De Graff Generator.

What are some practical applications of a Van De Graff Generator?

A Van De Graff Generator has many practical applications, including in particle accelerators, nuclear physics experiments, and electrostatic demonstrations. It is also used in some medical procedures, such as removing unwanted hair or treating skin conditions.

Similar threads

  • Introductory Physics Homework Help
Replies
1
Views
928
Replies
3
Views
3K
Replies
1
Views
6K
  • Introductory Physics Homework Help
Replies
1
Views
2K
  • Introductory Physics Homework Help
Replies
2
Views
7K
  • Electromagnetism
Replies
7
Views
2K
  • Electromagnetism
Replies
1
Views
2K
  • DIY Projects
Replies
8
Views
4K
Replies
5
Views
2K
  • Introductory Physics Homework Help
Replies
1
Views
16K
Back
Top