Register to reply 
Improving the image of meteor 
Share this thread: 
#1
Aug3113, 01:28 PM

P: 136

I'm using a small b/w digital video camera and frame grabber to catch images of meteors in maybe a 15x15 degree area. Typically noise is introduced into the frames. It is desirable to determine if the image contains a meteor, and clean up the noise in the frames. What methodology is available to do this? The camera has no way to use dark subtracts, stacking or related image processing methods. There is no way to, say, control the shutter other than to get 30 frames per second.



#2
Aug3113, 03:43 PM

Mentor
P: 12,005

Do you have any image processing software? If not, you can download RegiStax for free.
http://www.astronomie.be/registax/ You can also make manual dark frames by covering the lens of the camera and shooting images at the same exposure time (or FPS) that you were using to image meteors. 


#3
Aug3113, 07:25 PM

P: 136




#4
Aug3113, 10:20 PM

Mentor
P: 12,005

Improving the image of meteor
Here's something from my image processing book. It's the programming behind their basic noise filter:
FOR y = 1 to ymax  1 FOR x = 1 to xmax  1 k = 0 FOR i = 1 TO 1 FOR j = 1 TO 1 k = k + 1 neighbor (k) = old(x+i,y+j) NEXT j NEXT i SORT neighbor () new (x,y) = old(x,y) sigma = (neighbor(8)  neighbor(2)) / 2 IF old (x,y) > neighbor(5) + sigs * sigma THEN new (x,y) = neighbor(5) END IF IF old (x,y) < neighbor(5)  sigs * sigma THEN new (x,y) = neighbor(5) END IF NEXT x NEXT y Where sort is a function that sorts the array neighbor() into ascending order, sigma is the standard deviation, and sigs is a userset parameter specifying the number of standard deviations allowed. The loops in i and j load neighborhood pixels into the array neighbor starting with neighbor(1) and ending with neighbor(9). After sorting neighbor(9) contains the pixel with the highest value in the neighborhood. This replaces a pixel if and only if it deviates from the neighborhood pixel values by a certain amount determined by the userset sigs. 


#5
Sep113, 07:57 PM

P: 136

Ah, ha. Is that from the BerryBurnell book on IP? I had forgotten all about it. It looks like stuff in Chapter 1315. Is the program code on the DVD?



#6
Sep113, 08:37 PM

Mentor
P: 12,005

The Handbook of Astronomical Image Processing, by Richard Berry and James Burnell.
I don't know of any DVD however, mine only came with a CD containing the software. 


#7
Sep113, 08:45 PM

P: 136

Yes, a CD, but I do not see anyway to extract the computer code from it. I don't have AIP4WIN installed on this PC.



#8
Sep513, 10:16 PM

P: 136

Richard Berry wrote the code was not associated with any computer language. Just pseudo code. Apparently, you copied the code above from the book.
In any case, I need to read two of the chapters above to see how this stuff works. 


Register to reply 
Related Discussions  
[Lens] given: focal length and magnification, find image distance and image height  Introductory Physics Homework  7  
Online image hosting service, image embedding  Computers  8  
How to capture live video/image using Matlab without Image acq toolbox  Math & Science Software  1  
Analysis  proof involving 11, image and pre image of sets  Calculus & Beyond Homework  4  
Convert a text file into an image (or generate an image with fortran)  Computing & Technology  1 