## Calculating Flux density in DC-DC coil

Hello Everyone.

I am working on a DC-DC converter design which uses a transformer with an additional inductive element on the secondary side. The coil charges a large capacitor.

Since there is an additional inductive element on the secondary side the inductive element builds up a field while the pulse is applied (30kHz 50% duty cycle). When the pulse ends the field collapses and produces another pulse of the same duration (30kHz 50% duty cycle) and polarity since a diode is in series with the coil and capacitor (see attachment)

My question is: How do I calculate the Flux density since there are (2) 30kHz 50% duty cycle pulses....Do I calculate it as if it were a single 100% duty cycle 30kHz pulse? Or does the second pulse not count since it is the field collapsing?

Thanks for the help! It is greatly appreciated.
Attached Thumbnails

 PhysOrg.com engineering news on PhysOrg.com >> Researchers use light projector and single-pixel detectors to create 3-D images>> GPS solution provides 3-minute tsunami alerts>> Single-pixel power: Scientists make 3-D images without a camera