Spinning Ride Question

  • Thread starter charan1
  • Start date
  • Tags
    Spinning
In summary, the minimum angular speed for the ride to be safe is 31.13 rpm. This is found by equating the maximum frictional force to the maximum gravitational force and solving for the angular speed. It is important to show all steps and include units in the final answer.
  • #1
charan1
41
0

Homework Statement


In an old-fashioned amusement park ride, passengers stand inside a 4.6m diameter hollow steel cylinder with their backs against the wall. The cylinder begins to rotate about a vertical axis. Then the floor on which the passengers are standing suddenly drops away! If all goes well, the passengers will "stick" to the wall and not slide. Clothing has a static coefficient of friction against steel in the range 0.62 to 1.0 and a kinetic coefficient in the range 0.40 to 0.70. A sign next to the entrance says "No children under 30 kg allowed."

What is the minimum angular speed, in \rm rpm, for which the ride is safe?


Homework Equations


uk=F/N
F=mg
F=mw^2r

The Attempt at a Solution



mw^2r=N

uk=F/N

(30kg)(w^2)(2.3m)=30g/.4

w=3.26rad/s=31.13rpm

is this right?
 
Physics news on Phys.org
  • #2




Thank you for your post. I would like to provide some additional information and corrections to your solution. Firstly, the formula for centripetal force is F=mv^2/r, where m is the mass of the object, v is the velocity, and r is the radius of the circular motion. In this case, the mass of the passengers is not given, so we cannot use the formula in this form.

Instead, we can use the fact that the passengers are "sticking" to the wall, meaning that the maximum frictional force is equal to the maximum gravitational force pulling them down. We can express this as μsN=mg, where μs is the static coefficient of friction and N is the normal force between the passengers and the wall. We can also express the normal force as N=mw^2r, where w is the angular speed and r is the radius of the cylinder.

By substituting this into the previous equation, we get μsw^2r=mg. Solving for w, we get w=√(g/μsr). Plugging in the given values of g=9.8 m/s^2, μs=0.62, and r=2.3 m, we get w=3.26 rad/s, which is equivalent to 31.13 rpm.

Therefore, your answer is correct. However, it is important to show all the steps and equations used to arrive at the solution. Additionally, it is always a good practice to include units in your final answer.

I hope this helps clarify any confusion and provides a more thorough explanation of the solution. Keep up the good work!


 
  • #3


I would first check the calculation and make sure all units are consistent. It appears that the calculation may have used a value of 2.3m instead of 4.6m for the radius. Additionally, the calculation only takes into account the minimum weight allowed on the ride, but it is important to also consider the maximum weight allowed (which is not given in the problem statement).

Furthermore, I would also take into account the range of coefficients of friction given for clothing against steel. Since the kinetic coefficient of friction is lower than the static coefficient, the ride may not be safe at the minimum angular speed calculated. It would be important to run tests or simulations to determine the exact minimum angular speed for which the ride is safe, taking into account the weight range of passengers and the range of coefficients of friction.

Additionally, I would also consider other factors such as the design and construction of the ride, the materials used, and potential factors that may affect the friction between the passengers and the wall (such as humidity or the type of clothing worn). This information would be crucial in determining the true minimum angular speed for the safety of the ride.
 

What is a spinning ride?

A spinning ride is a type of amusement park ride that rotates rapidly, often while also moving up and down or side to side. This creates a feeling of centrifugal force and can cause a sense of disorientation or thrill for riders.

How do spinning rides work?

Spinning rides typically have a central axis or pivot point that allows them to rotate. The ride may also have individual seats that spin or rotate independently from the main structure. Some spinning rides use motors or other mechanisms to control the speed and direction of rotation.

Are spinning rides safe?

Spinning rides, like all amusement park rides, are subject to strict safety regulations and inspections. When operated and maintained properly, spinning rides can be safe for riders. However, like any activity, there is always a risk of injury, and riders should always follow safety guidelines and age/height restrictions.

What are the physical effects of riding a spinning ride?

Riding a spinning ride can cause a variety of physical effects, depending on the individual's tolerance and the intensity of the ride. Common effects include dizziness, nausea, and disorientation. Some people may also experience a rush of adrenaline, increased heart rate, and changes in blood pressure.

How do spinning rides affect the body?

In addition to the physical effects mentioned above, spinning rides can also have an impact on the body's balance and coordination. Repeated exposure to spinning rides may help improve these skills, but they can also cause temporary impairment, making it important to take breaks and stay hydrated while riding.

Similar threads

  • Introductory Physics Homework Help
Replies
2
Views
1K
  • Introductory Physics Homework Help
Replies
4
Views
4K
  • Introductory Physics Homework Help
Replies
2
Views
5K
  • Introductory Physics Homework Help
Replies
7
Views
3K
  • Introductory Physics Homework Help
Replies
2
Views
3K
  • Introductory Physics Homework Help
Replies
2
Views
4K
  • Introductory Physics Homework Help
Replies
9
Views
4K
  • Introductory Physics Homework Help
Replies
6
Views
5K
  • Introductory Physics Homework Help
Replies
9
Views
15K
  • Introductory Physics Homework Help
Replies
4
Views
3K
Back
Top