Register to reply

Isolator - AC23A operation

by nisham
Tags: ac23a, isolator, operation
Share this thread:
nisham
#1
Sep19-13, 04:15 AM
P: 2
Dears,

Can anyone brief what is the operation functionality of AC23A operation of isolators & what is the difference between AC22A & AC23A operation.
Phys.Org News Partner Engineering news on Phys.org
Student develops filter for clean water around the world
Developing the next evolution in underwater communication
Compact vibration harvester power supply with highest efficiency opens door to "fix-and-forget" sensor nodes
jim hardy
#2
Sep19-13, 06:52 AM
Sci Advisor
PF Gold
jim hardy's Avatar
P: 3,505
It would seem it's just a difference in ratings, AC23 being robust enough for more highly inductive loads.

http://www.hevacomphelp.com/ELEC/1pdf/MCP/0001.PDF
DEFINITIONS OF UTILIZATION
CATEGORY
AC20A Connecting and disconnecting
under no load condition.
AC21A Switching of resistive loads
including moderate overloads.
AC22A Switching of mixed resistive
and inductive loads including
moderate overloads.
AC23A Switching of motor, or other


Was that the question?
There'll be differences in contact size & material, and in the arc quenching apparatus.

This link gives power factor of 65% for AC22, 35% for AC23
http://www.gil-lec.co.uk/custom/uplo...s_Switches.pdf

and suggests that a given switch may be used for more severe duty at reduced current
Manufacturers may assign more than one AC duty rating to their
devices. For example an AC22 switch can be given a lower
current rating when assigned to AC23 duty. Manufacturers may
also assign a maximum kW power rating for motors or a kVAr
reactive power rating for capacitors.

If you're looking for construction details , i'd take apart a few from different manufacturers to see how they get around one another's patents.
nisham
#3
Sep21-13, 05:20 AM
P: 2
Thank you, even i have the same information as you have told. i would like to know what makes the AC23A duty to give a different current rating than other duty. Also what is the theoretical reason behind introducing such different duties in isolators.

jim hardy
#4
Sep21-13, 08:51 AM
Sci Advisor
PF Gold
jim hardy's Avatar
P: 3,505
Isolator - AC23A operation

Quote Quote by nisham View Post
Thank you, even i have the same information as you have told. i would like to know what makes the AC23A duty to give a different current rating than other duty. Also what is the theoretical reahttp://www.gil-lec.co.uk/custom/upload/pdfs/circuit%20protection/Hager_Isolators_Switches.pdfson behind introducing such different duties in isolators.

again, http://www.gil-lec.co.uk/custom/uplo...s_Switches.pdf
Common types of defined switching category:
20 Connecting & disconnecting under no load.
21 Switching of resistive loads.
22 Switching of mixed resistive & inductive loads.
23 Switching of highly inductive loads.
Have you ever played with inductors and noticed how the make an arc when you interrupt current?

That is rough service for a contact - it must be made from something that resists arc welding.

e = l di/dt


Register to reply

Related Discussions
Operation of SCR Electrical Engineering 1
What electric isolator material? Materials & Chemical Engineering 7
Help using opto isolator or smiler device Engineering Systems & Design 0
Bidirectional isolator for three-wire serial bus? Electrical Engineering 6
Isolator -> semiconductor? Atomic, Solid State, Comp. Physics 1