Mass difference of a charged and a drained battery cell

In summary, the mass of a battery cell which is charged and the one which is drained is not proportional to the total work done by the cell (including loss due to resistance), with c^2 as the proportionality constant.
  • #1
Ralph Spencer
21
0
Is there a difference between the mass of a battery cell which is charged and the one which is drained? If yes, is difference of the two values proportional to the total work done by the cell (including loss due to resistance), with c^2 as the proportionality constant?
 
Physics news on Phys.org
  • #2
The mass should remain the same, the same number of protons/neutrons and electrons remain in the battery when it is discharged as when it is charged. Only the molecular structure is changed.

I can't think of any reason you would lose mass.

The battery performed work by reducing the potential energy of the molecules, like when hydrocarbons are burned to water and carbonoxides
 
  • #3
LostConjugate said:
The battery performed work by reducing the potential energy of the molecules

and that means loss of mass
 
  • #4
The drained battery has less energy and will be less massive as in accordance with E=Mc squared.
 
  • #5
Thats curious, it still has the same number of particles. Is this because the atoms in unstable molecules have higher energy states and more internal kinetic energy which translates to a more massive battery?
 
  • #6
having the same number of particles does not mean having the same mass, that's all the point of E=mc^2
 
  • #7
vin300 said:
having the same number of particles does not mean having the same mass, that's all the point of E=mc^2

Because the particles have relative velocity correct?
 
  • #8
The potential energy of the system also contributes to (or subtracts from) the system's mass.
 
  • #9
Thanks for all the replys.

The potential energy of the system also contributes to (or subtracts from) the system's mass.
Y

I think the mass will change, but too small to be easily detected - and may be possibly lost to error.

Am I correct?
 
  • #10
The energy stored in the battery is easily measured and the resulting mass lost can be calculated.The mass loss is far too small to be detected by direct mass measuring techniques such as weighing.
 
  • #11
Is this the correct proof:

Code:
Let m₁ = Initial mass of the battery cell.
     m₂ = Mass of the drained battery cell.

Now, m₃ = m₁ - m₂.

     E = mc²
     and, m=m₃
     
Therefore, E=m₃c²
         ⇒ m₃c² = E
         ⇒ m₃ = E/c²

So, as far as E is non-zero, m₃ has to be have a positive value
however small. 

As m₃ is positive, m₁ > m₂.
i.e. A battery looses mass as it gets drained.
 
Last edited:
  • #12
The difference in mass is equal to the difference in energy divided by c^2. I think you had it right in your original post there.
 
  • #13
difference in mass is equal to the difference in energy divided by c^2

Why so? It should be total energy divided by c²? I don't understand where the difference of energy comes from.
 
  • #14
From a prior thread:

vanesch said:
Yes, there should be a diminuation in mass of the battery when it discharges, according to relativity. As to be able to measure this, I don't think this is going to be possible, as the change is too small.

120 Ahr at 12V (a serious car lead battery) corresponds to about 5 MJ, which corresponds (mc2) to ~60 nanogram.
I don't think you can see a difference of 60 nanogram on the weight of a car battery of say, 20 kg. You'd need a precision of about 12 digits to start seeing the difference.
 
  • #15
For a wet lead acid battery, a battery that has a mixture of water and sulfuric acid, it does weigh less when discharged. A common way to check the battery for discharge is to measure its specific gravity, which is a measure of its electrolyte compared to same amount of pure water. Using a hydrometer, pure water has an SP of 1.00 while a charged battery may have an SP of 1.260. This means that electrolyte is 1.260 times heaver than pure water. It is the sulfuric acid that enables it to weigh more than water. In a dead (sulfated) battery, the hydrogen portion of the sulfuric acid combines with the oxygen portion of the lead oxide of the positive plate producing water.

During discharge there are different reactions occurring to positive, negative and electrolyte simultaneously. Positive plates contain lead oxide (lead and oxygen), which is a compound that can be separated. Negative plates contain sponge lead as its active material. When discharging the lead portion of the lead oxide on positive plate starts to mix with the sulfate found in the sulfuric acid, which forms lead sulfate on the positive plates. At same time lead in negative plate combines with the sulfate from sulfuric acid to form lead sulfate on negative plates. The oxygen portion of the active material on positive plates combines with the hydrogen of the sulfuric acid to form water. The water drastically reduces the strength of the electrolyte. Both the negative plates and positive plates now contain heavy concentrations of lead sulfate and water.

During recharging chemical reactions are reversed. The individual chemicals split from their compounds reform to original state.
 
  • #16
L. Brillouin addresses this problem in the monograph "Relativity Re-examined". He essentially says that the equation [tex]E = mc^2[/tex] takes only kinetic energy into account. He derives an extra term for potential energy in a simple case. Maybe in this case it makes sense to differentiate inertial mass from potential mass which is stored in the E and B fields?
 
Last edited:

1. What is the mass difference between a charged and a drained battery cell?

The mass difference between a charged and a drained battery cell varies depending on the type and size of the battery. However, on average, a charged battery will weigh slightly more than a drained battery due to the presence of charged ions and electrolytes.

2. Why does a charged battery weigh more than a drained battery?

A charged battery weighs more than a drained battery because when a battery is charged, chemical reactions occur within the battery that result in the movement of charged ions and electrolytes. These ions and electrolytes add weight to the battery.

3. Is the mass difference between a charged and drained battery cell significant?

The mass difference between a charged and drained battery cell may not be noticeable to the average person, but it is significant in terms of the battery's performance. A fully charged battery will have a higher energy density and can power devices for a longer time compared to a drained battery.

4. Does the type of battery affect the mass difference between charged and drained states?

Yes, the type of battery can affect the mass difference between charged and drained states. For example, lithium-ion batteries have a larger mass difference compared to alkaline batteries due to the specific chemical reactions that occur within each type of battery.

5. How can the mass difference of a charged and drained battery cell be measured?

The mass difference of a charged and drained battery cell can be measured using a scale or balance. The battery should be weighed in its fully charged state and then again in its drained state. The difference in weight between the two measurements will give the mass difference of the battery.

Similar threads

Replies
14
Views
2K
  • Electromagnetism
2
Replies
36
Views
2K
Replies
17
Views
1K
  • Electromagnetism
Replies
3
Views
911
Replies
13
Views
884
Replies
1
Views
768
Replies
2
Views
995
Replies
4
Views
815
Replies
10
Views
2K
  • Electromagnetism
Replies
3
Views
1K
Back
Top