Different colored light on solar panels?

In summary: Not quite. The color of the light does matter. It needs to be of at least the cut-off frequency, or it won't power the cell. It is an all-or-nothing effect. The brightness does matter. It is essentially a measure of the number of photons hitting the cell. This is a continuous effect - more brightness means more current. It is possible to saturate a cell though, in which case adding more photons will have diminishing
  • #1
algilaera
2
0
would there be any difference if different wavelengths of light is shined on a solar panel? like red, blue and green light. would blue produce the must power becuse the frequency is the heighest? also would ultrviolet light work on solar panels? would it produce more energy?
 
Physics news on Phys.org
  • #2
It depends upon the solar panel. Different materials are sensitive to different frequencies.
 
  • #3
Solar cells only use multiples of there absorbtion frequency, all other energy is dumped as heat.

Some types of solar cells absorb blue light so,
if you gave it red light, it takes a lot of potons to move the electron, so it generates verry little energy/light used
if you gave it UV light, it would take the energy it needed, then 'burn' off the rest as heat.
if you gave it blue light, it would thank you, and give you a lot of energy.
 
  • #4
Single material solar cells have a cut-off frequency. Below the cut-off, no electricity is generated. The light passes through the active layer, and is lost. Light at the cut-off generates one electroon for each photon. Light above the cut-off generates one electron for each photon, but also creates unwanted heat.

There are composite solar cells that use 2 materials. The top layer let's low frequency light through, and converts high energy photons to electricity. The bottom layer converts the low frequency light, and is shielded from the more energetic photons that would cause heating.

Recent discovery of the band-gap of InN allows for the creation of a graded material. It would have a continuously varying band-gap that would allow for the design of a theoretically optimized solar cell, extracting the maximum conceivable electricity from sunlight.

Njorl
 
  • #5
so you guys are saying different colored lights wount matter? and it wount matter if its a dim light or a bright light becasue if the lights strong enough to be above the "cut-off" point, it would produce the same amount of voltage?
 
  • #6
Originally posted by algilaera
so you guys are saying different colored lights wount matter? and it wount matter if its a dim light or a bright light becasue if the lights strong enough to be above the "cut-off" point, it would produce the same amount of voltage?

Not quite.

The voltage produced is dependent on the structure of the cell.

The current produced depends on the number of photons absorbed.

The color of the light does matter. It needs to be of at least the cut-off frequency, or it won't power the cell. It is an all-or-nothing effect.

The brightness does matter. It is essentially a measure of the number of photons hitting the cell. This is a continuous effect - more brightness means more current. It is possible to saturate a cell though, in which case adding more photons will have diminishing returns.

Njorl
 

1. How do different colored lights affect solar panel efficiency?

Different colored lights have varying wavelengths and energy levels. Solar panels are designed to absorb certain wavelengths of light, so if the color of the light falls within this range, it will be converted into electricity. However, if the color of the light is outside of this range, the efficiency of the solar panel will decrease.

2. Can different colored lights produce different amounts of electricity on solar panels?

Yes, different colored lights can produce different amounts of electricity on solar panels. This is because each color has a different wavelength and energy level, which affects the amount of energy that can be converted into electricity. For example, blue and violet light have shorter wavelengths and higher energy levels, so they can produce more electricity compared to red and green light.

3. What is the most efficient color of light for solar panels?

The most efficient color of light for solar panels is blue or violet light. These colors have shorter wavelengths and higher energy levels, which can be converted into more electricity by the solar panel. However, it is important to note that solar panels are designed to absorb a wide range of wavelengths, so all colors of light can contribute to the overall efficiency.

4. How do cloudy or overcast days affect solar panel efficiency?

Cloudy or overcast days can significantly reduce the efficiency of solar panels. This is because the clouds block a significant amount of sunlight from reaching the solar panels. Solar panels need direct sunlight to function at their maximum efficiency, so they will produce less electricity on cloudy days.

5. Can colored filters be used to enhance the efficiency of solar panels?

Yes, colored filters can be used to enhance the efficiency of solar panels. By using a colored filter, the solar panel can be optimized to absorb specific wavelengths of light, increasing the amount of energy that can be converted into electricity. However, careful consideration and testing should be done before using colored filters, as they can also potentially reduce the efficiency of the solar panel if not chosen correctly.

Similar threads

  • Introductory Physics Homework Help
2
Replies
35
Views
3K
  • Introductory Physics Homework Help
Replies
4
Views
1K
Replies
6
Views
1K
  • Earth Sciences
Replies
6
Views
1K
Replies
4
Views
780
Replies
1
Views
674
  • Electrical Engineering
Replies
32
Views
2K
  • Other Physics Topics
Replies
20
Views
421
  • Introductory Physics Homework Help
Replies
7
Views
2K
  • Mechanical Engineering
Replies
30
Views
2K
Back
Top