Vacuums & Buoyancy: Can They Fly?

  • Thread starter LemonScented
  • Start date
  • Tags
    Buoyancy
In summary, the conversation discusses the concept of using a vacuum to create buoyancy and fly, similar to how a zeppelin uses helium or hydrogen. However, it is noted that creating a container strong enough to hold a vacuum and light enough to fly is difficult with current materials. The conversation also addresses the question of why vacuum-powered airships are not preferred over helium or hydrogen, with the main reason being the small increase in buoyancy compared to the significant increase in weight of the containing vessel. The conversation also touches on the differences between zeppelins and blimps in terms of internal pressure and structural design.
  • #1
LemonScented
2
0
So, it looks like I'm not likely to get an answer to the https://www.physicsforums.com/showthread.php?t=345179", but I figured whilst I was here I'd ask something that's had me curious for years.

Buoyancy causes things to float/fly when the average density of a body is less than that of the density is traveling through, yes? A zeppelin flies (well okay, not so many of them anymore) because the helium or hydrogen inside it is less dense than the air outside.

The least dense thing I can think of is a vacuum. So, if a container could be made that was sufficiently strong so that it wouldn't collapse under the air pressure, and sufficiently large (and light) that the volume of the vacuum it contains is enough to reduce the average densite of the whole body, would it fly? Is there a physical reason why this wouldn't work, or is the reason we don't have vacuum powered airships due to difficulties with engineering - inadequate materials or prohibitive cost?
 
Last edited by a moderator:
Physics news on Phys.org
  • #2
So, if a container could be made that was sufficiently strong so that it wouldn't collapse under the air pressure, and sufficiently large (and light) that the volume of the vacuum it contains is enough to reduce the average densite of the whole body, would it fly?
Yes, of course.
But making a container that have walls that are both strong enough to hold a vacuum AND light enough to fly is very difficult, probably impossible with the materials we have today.
 
  • #3
The athmospheric pressure is very high. That prevents us from making vacuum containing baloons.

On the other hand, a bottle in water is nearly what you are asking about, in a realtive sense.
 
  • #4
LemonScented said:
The least dense thing I can think of is a vacuum. So, if a container could be made that was sufficiently strong so that it wouldn't collapse under the air pressure, and sufficiently large (and light) that the volume of the vacuum it contains is enough to reduce the average densite of the whole body, would it fly? Is there a physical reason why this wouldn't work, or is the reason we don't have vacuum powered airships due to difficulties with engineering - inadequate materials or prohibitive cost?

It looks like you're trying to ask why vacuum 'airships" would not be preferable over hydrogen or helium. The reason is very simple, you'd only get about an extra 6% net boyancy from a vacuum as compared with hydrogen and for that small increase you'd pay a huge price in terms of increased weight of the containing vessel to make it strong enough to withstand the enormous pressure.
 
  • #5
LemonScented said:
So, if a container could be made that was sufficiently strong so that it wouldn't collapse under the air pressure, and sufficiently large (and light) that the volume of the vacuum it contains is enough to reduce the average densite of the whole body, would it fly?

I concur with the previous answers.

In fact, blimps work the other way round!

In zeppelins the internal helium pressure is equal to the atmospheric pressure. The zeppelin's internal frame must be strong enough to make the Zeppelin able to withstand pummeling by wind, but the atmospheric pressure is dealt with by the Helium.

A blimp on the other hand, has no internal frame; a blimp is skin only. Blimps are pressurized to make them rigid.
 

1. How can a vacuum and buoyancy be used to make an object fly?

The concept of using a vacuum and buoyancy to make an object fly is based on the principle of air pressure. By creating a vacuum inside a container and then filling it with a gas, such as helium, the object will experience an upward force due to the difference in air pressure between the top and bottom of the container. This upward force, or buoyancy, can be used to lift the object off the ground and make it fly.

2. Can any object fly using this method?

In theory, any object can fly using a combination of a vacuum and buoyancy. However, the size and weight of the object will determine how much gas is needed to create enough buoyancy to lift it off the ground. Therefore, larger and heavier objects will require a larger volume of gas, making it more difficult and expensive to achieve flight.

3. How is the vacuum created inside the container?

The vacuum is created using a vacuum pump, which removes all the air molecules from inside the container. This creates a low-pressure environment, allowing the gas inside to expand and fill the space. The resulting difference in air pressure creates the upward force or buoyancy that allows the object to fly.

4. Is this method of flight practical for everyday use?

Currently, using a vacuum and buoyancy to make objects fly is not a practical method for everyday use. It requires specialized equipment and a significant amount of gas, making it expensive and difficult to implement on a large scale. However, it has been used in some special cases, such as in scientific experiments and demonstrations.

5. Are there any safety concerns when using a vacuum and buoyancy to fly?

As with any method of flight, there are potential safety concerns when using a vacuum and buoyancy. The gas used to create the upward force can be flammable, so proper precautions must be taken to prevent accidents. Additionally, the container used to hold the gas must be strong enough to withstand the pressure difference, and any leaks or ruptures could result in the object falling to the ground.

Similar threads

  • General Engineering
Replies
5
Views
2K
Replies
2
Views
1K
Replies
9
Views
1K
  • Other Physics Topics
2
Replies
51
Views
4K
Replies
5
Views
1K
Replies
1
Views
4K
  • Materials and Chemical Engineering
Replies
6
Views
1K
  • Classical Physics
Replies
11
Views
2K
  • Introductory Physics Homework Help
Replies
13
Views
3K
  • Sci-Fi Writing and World Building
Replies
9
Views
2K
Back
Top