Understanding Inverted Flight: The Science Behind Flying Upside Down

  • Thread starter dusty8683
  • Start date
  • Tags
    Planes
In summary, airplanes are able to fly due to the relationship between velocity and pressure, as well as the shape of the wing. However, this raises the question of how planes are able to fly inverted. This is possible due to the design of the wing, with different wing profiles and angles allowing for lift to be generated even when upside down. This is further aided by the use of flaps and other modifications on stunt planes to increase lift.
  • #1
dusty8683
22
0
i recently asked how airplanes work and i was give this answer: as velocity increases pressure decreases and the shape of the wing makes it so that the wind travels over the top of the wing faster than the bottom of the wing. so since there's a faster velocity on the top there is a lesser pressure on the top causing it to rise. if that is the case, how do planes fly inverted?
 
Last edited by a moderator:
Physics news on Phys.org
  • #2
Airplanes that fly at a very low speed and so require high "lift to speed" ratio have wing profiles in which the upper surface is noticably arched. Such an airplane would have an extremely difficult time flying upside down.

Airplanes that fly at high speeds have wings that are much more symetrical (with respect to top and bottom) and rely more on angle of attack (the angle the wing makes with the horizontal) to create the asymmetry necessary. Such an airplane can fly inverted by flying so that the wing is still at an upward angle to the horizontal.
 
  • #3
you can get lift out of a flat piece of ply-wood the angle of attack is the trick
5 to15 degrees higher in the front leading edge depending on speed

actualy most stunt planes are lower speed
one common type stearmans are bi-planes.
flaps on the trailing edge are used in a reverced position on some stunt planes to gain extra lift
 

1. How does an inverted flight differ from a regular flight?

In a regular flight, the wings of a plane generate lift by directing air downwards. In an inverted flight, the plane is flying upside down, and the wings must generate lift by directing air upwards.

2. What keeps the plane from falling during an inverted flight?

The lift generated by the wings, along with the thrust from the engines, keeps the plane from falling during an inverted flight. The wings are at a negative angle of attack, meaning they are angled downwards, pushing the air upwards and creating lift.

3. How do pilots control the altitude and direction of the plane during an inverted flight?

Pilots use the control surfaces of the plane, such as the ailerons and elevator, to adjust the angle of attack and direction of the wings. This allows them to control the lift and keep the plane stable during an inverted flight.

4. Can any plane fly inverted?

No, not all planes are capable of flying inverted. Planes that are specifically designed for aerobatic or military use are typically able to perform inverted flights. Commercial planes are not designed for this type of flying.

5. Is flying inverted safe?

Flying inverted can be safe when done by trained pilots in appropriate aircraft. However, it is a high-risk maneuver and should only be attempted by experienced pilots who have been trained in aerobatic flying techniques. It is important to follow proper safety protocols and regulations when performing an inverted flight.

Similar threads

Replies
56
Views
10K
  • Classical Physics
Replies
30
Views
3K
Replies
52
Views
5K
  • Mechanical Engineering
2
Replies
36
Views
7K
Replies
4
Views
2K
  • Introductory Physics Homework Help
Replies
4
Views
1K
  • Special and General Relativity
Replies
27
Views
4K
  • Mechanics
Replies
7
Views
2K
Replies
12
Views
3K
Replies
7
Views
3K
Back
Top