Time orbiting potential trap (TOP-trap)

In summary, a TOP trap is a type of magnetic trap used to produce Bose-Einstein Condensates with alkali atoms. It consists of four coils arranged in a Helmholtz configuration that generate a rotating bias field, effectively plugging the "hole" in the center of a quadrupole trap. This trap allows for the first experimental realization of BEC by preventing Majorana spin flips and creating a rotating potential that can be used for evaporation.
  • #1
Carnot
19
0
Hi, can someone please explain how a TOP-trap works?

Thanks :)
 
Physics news on Phys.org
  • #2
Hi Carnot, I know this response is coming in a bit late, but better late than never..

TOP traps are useful for making Bose-Einstein Condensates with alkali atoms. Normally you start with a magneto-optical trap (MOT) and then evaporate the atoms for the next stage in cooling. MOT's generally use a quadrupole trap which is made from two current-carrying coils with the the fields anti-aligned (anti-Helmholtz configuration). The atoms are held in the magnetic trap if they are in a low-field seeking state. Evaporation is carried out using radio frequency waves which force atoms at a certain part of the field (based on their Zeeman splitting) into a high-field seeking state and thus ejecting them from the trap. The problem with _just_ using a quadrupole trap is that when the atoms pass through the zero-point in the magnetic field they no longer have a well defined quantization axis and can undergo a Majorana spin-flip. This puts the atoms in a high field seeking state causing them to be lost from the trap.

The solution to plugging the "hole" in the center of the quadrupole trap has been solved several different ways by now, but the TOP trap was the solution which allowed for the first experimental realization of BEC. If you think of the axis of the quadrupole coils as the z axis, then the TOP trap is made of 4 coils with 2 along the x-axis and 2 along the y axis. Each coil pair generates a homogeneous bias field (Helmholtz configuration) which can be directed along x or -x (and y or -y for the other pair). By feeding the coils along the x-axis a sinusoidal current and an identical current which is 90 degrees out of phase along the y-axis coils, you can create a bias field which simply rotates over time.

If you imagine the bias field turning on quickly, the quadrupole field is displaced causing the field zero to move away from the atoms. The atoms will slowly roll down the potential back toward the zero point in the quadrupole field. However, the TOP field rotates and moves the zero point to a different location before the atoms can catch up. The rotating field pushes the zero around the cloud at some radius (which is determined by the bias field strength), and the rotation rate is fast enough that the atoms can never catch up. The resulting potential shape is calculated by averaging the displaced quadrupole field at each point in the TOP phase. Upon taking the average of the field, the minimum potential in the trap is no longer at a point where the magnetic field amplitude is zero. This setup only allows Majorana spin flips if the amplitude of the bias field is reduced such that the zero point in the field is passing through the atomic cloud. The circle that the zero point traces out can be used to evaporate atoms and is commonly referred to as the "circle of death".
 

1. What is a Time Orbiting Potential Trap (TOP-trap)?

A Time Orbiting Potential Trap (TOP-trap) is a type of ion trap that uses a combination of electric and magnetic fields to confine and manipulate charged particles or ions. It is used in experiments to study the properties of ions and to trap them for extended periods of time.

2. How does a TOP-trap work?

A TOP-trap works by creating a time-varying potential that oscillates at a specific frequency. This potential creates a force on the ions, causing them to oscillate and become trapped in the center of the trap. The frequency of the potential can be adjusted to control the motion and stability of the ions.

3. What are the advantages of using a TOP-trap?

One of the main advantages of a TOP-trap is its ability to trap ions for long periods of time, allowing for more precise measurements and experiments. It also has the ability to cool ions to very low temperatures, making it useful for studying the quantum properties of ions. Additionally, TOP-traps can trap multiple types of ions simultaneously, allowing for more complex experiments.

4. What are some applications of TOP-trap technology?

TOP-trap technology has a wide range of applications in various fields of science. It is commonly used in atomic and molecular physics, quantum computing, and precision measurements. It has also been used in the development of atomic clocks, which are used in GPS systems and other navigation technologies.

5. Are there any limitations to using a TOP-trap?

While TOP-traps have many advantages, they also have some limitations. One limitation is the difficulty in trapping larger ions, as the trapping potential becomes weaker with increasing ion mass. Additionally, TOP-traps can be susceptible to external magnetic fields, which can disrupt the trapping potential and affect the stability of the ions.

Similar threads

  • Atomic and Condensed Matter
Replies
1
Views
863
  • Atomic and Condensed Matter
Replies
1
Views
944
  • Atomic and Condensed Matter
Replies
2
Views
2K
  • Atomic and Condensed Matter
Replies
0
Views
99
  • Atomic and Condensed Matter
Replies
3
Views
941
  • Atomic and Condensed Matter
Replies
1
Views
1K
  • Atomic and Condensed Matter
Replies
10
Views
1K
Replies
1
Views
2K
Replies
6
Views
781
  • Classical Physics
Replies
1
Views
452
Back
Top