Register to reply 
Creating 3d coordinates from stereoscopic images 
Share this thread: 
#1
Jul1614, 11:27 AM

P: 4

Hi, I'm working on a project that would take a 3d image using stereocopic camera and would record the depth and the 2d (x1,y1) , (x2,y2) coordinates of a single point in the image. The depth is found using the focal point, disparity, and the distance between the difference the camera sees on the point.
I was wondering if there is a formula that would convert this point into a (x,y,z) coordinate. I'm stuck because even if the physical location of the point may be different, the camera would reply with a different depth, but same x,y values. Thanks, 


#2
Jul1614, 10:29 PM

P: 344

isn't the depth the z coordinate? Could you be more specific about what you are imaging, and maybe include some kind of illustration?



#3
Jul1814, 12:48 AM

Sci Advisor
Thanks
P: 1,952

Is this a correct description of the problem ?
You have two identical cameras. The pinholes of those cameras are positioned on the xaxis, the first at the origin, looking along the zaxis, with the second camera, at x = s, with camera 2 optical axis parallel to that of camera 1. The images from the two cameras each have a cardinal reference point, defined by the intersection of the image and the optical axis. A point object, visible on both images is located relative to the reference point; on image #1 at (x1, y1), and on image #2 at (x2, y2). Find the position of the point object(x, y, z), given s, and the (x1, y1) and (x2, y2) offsets. Do you have the distance of the pinhole from the image plane? 


#4
Jul1814, 01:38 PM

P: 33

Creating 3d coordinates from stereoscopic images
This site may be of some use: http://www.dis.uniroma1.it/~iocchi/stereo/triang.html
It shows how to find coordinates for parallel and nonparallel camera positions to a point. This one does a better job explaining it though: https://courses.cs.washington.edu/co...cts/lect16.pdf 


#5
Jul2114, 12:21 PM

P: 4

Baluncore, Thats exactly how I should've worded it.
The distance from the pinhole to image plane is roughly about 50cm, but I want it to work for any value. 


#6
Jul2114, 05:35 PM

Sci Advisor
Thanks
P: 1,952

The zcoordinate is a function of the image plane to pinhole distance. With a lens, that is the focal length only when focussed at infinity. Let's be slack and just call it f. So you must be able to somehow measure or calibrate f, against your camera separation, s. Draw a view of the object and image placement in the xz plane and you will see it is ratiometric. x = s * x1 / (x1+x2), I will let you sort out the sign of the x values. z = f * ?, and the y = ? values. See the post#4 references from blainiac. 


Register to reply 
Related Discussions  
Stereoscopic deep space imaging  Astronomy & Astrophysics  7  
Questions about Stereoscopic 3D  General Engineering  17  
Proof work  Topology Images and Inverse Images  Calculus & Beyond Homework  0  
Creating Figures/Images/Graphics for Visualization  Academic Guidance  2  
BioImages, background Images  Computing & Technology  0 