
#1
Sep1813, 03:26 PM

P: 30

How do I find deflection (displacement) in point C at the end of the beam? Answer is to be given in mm. There is a roller connection (only Fy) in B and an external pin in A (Fy and Fx).




#2
Sep1813, 04:19 PM

HW Helper
Thanks
P: 5,578

As in all beam problems, first determine the reactions at A and B which put the loaded beam in equilibrium.
Once that is done, you can determine the deflection at C from first principles (if you like doing the math) or you can use software which analyzes beam problems. To find the true deflection of the beam, you will need to know the modulus of elasticity (E) and the moment of inertia (I) of the beam. 



#3
Sep1813, 04:51 PM

P: 30

I have the modulus of elasticity (E) and the moment of intertia (I), but what formula do I use? There are different formulas for different situations. You can see formulas here: http://en.wikipedia.org/wiki/Deflection_(engineering)




#4
Sep1813, 05:50 PM

HW Helper
Thanks
P: 5,578

How do I find deflection in this beam?
See this attachment:
http://www.advancepipeliner.com/Reso...n_Formulae.pdf The deflection of your beam would be approximately equal to the sum of the deflections from case 1 and case 4. Your beam is not exactly fixed at point B so the deflection at C will only be approximate. Like I said earlier, in order to find the exact amount of deflection, you would have to analyze the beam from first principles. 



#5
Sep2113, 10:12 PM

Sci Advisor
HW Helper
P: 2,110

Please see duplicate thread at thread 711339.



Register to reply 
Related Discussions  
Problem on stiffness matrix of beam and deflection of tapered beam  Engineering, Comp Sci, & Technology Homework  2  
How to find deflection of a composite cantilevered beam?  Engineering, Comp Sci, & Technology Homework  1  
loaded beams! find where the maxinum deflection occurs on the beam  Engineering, Comp Sci, & Technology Homework  4  
IBeam deflection to find E  Mechanical Engineering  18  
superposition to a beam to calculate or show beam deflection  Engineering, Comp Sci, & Technology Homework  6 