What Are the Physics Behind Bouncing on a Trampoline?

In summary: That's the tensile stress in the rubber band. Now try the same experiment with the rubber band stretched vertically. The vertical stress is much larger than the horizontal stress. That's because the orientation of the rubber band has changed, and the stress is now perpendicular to the direction of the stretching. That's what's happening with the trampoline membrane.
  • #1
Gigantron
11
0
I was hoping that somebody could explain the physics behind a person bouncing up and down the trampoline. I know the basics as far as what happens to Kinetic Energy, Elastic potential energy, and gravitational potential energy...but there certainly has to be more than this, right? Can someone just explain the physics as to what's happening to an object bouncing on a trampoline on the very bottom, right in the middle, and at the very top?
 
Physics news on Phys.org
  • #2
I think you've got the basics right there, but in case you don't I'll try to explain it really quickly.

When you come down, right before you hit the trampoline, your energy is almost all KE, with only an insignificant amount of GPE. Immediately, when you hit, it acts like a spring, pushing up on you, slowing you down and building up EPE. When you get to the bottom, you have 0 GPE, 0 KE, and all EPE. Then it starts pushing on you. Additionally, you start pushing with your legs (or you were pushing the whole time, it doesn't matter.) Since you were probably scrunched up, straightening out pushes your body up and your legs into the trampoline, which acts on you with a NF, upwards. This increases the upward force, in addition to the "spring" force. Just when you get to the regular height of the trampoline, it stops pushing (theoretically speaking. The trampoline has some mass, so it would continue a little, but not much). Then, you have a tiny amount of GPE and the rest of your energy is KE. When you get to the top of your bounce, all your energy is GPE, no elastic and no KE. Then you start coming down and the cycle restarts again.

Hope that answered your question.
 
  • #3
A trampoline provides a near ellastic collision between the person and the bed (surface) of the trampoline, and also extends the time of the collision, reducing the peak amount of force related to the deceleration and acceleration of each bounce. A person can use his/her muscles to increase the force, and the increase in KE will be equal to the net increase in force over the distance of the bounce. Typically most of the effort is performed near the bottom of the bounce, where the total force is greatest. Note the forces in a competitive situation are large enough that a person can't bend the legs very much without the legs buckling, but only a small amount of relative leg motion is required to maintain or increase KE on a high bounce with high forces involved. Actually it's possible to generate enough force by swinging arms around in a circle at the right moments with the legs kept stiff on a quality trampoline to increase the KE for a fairly high bounce.
 
  • #4
The trampoline "membrane" is under "in plane" tensile stress (which is initially horizontal). When you exert a downward force on the center of the membrane, the center moves down, and this changes the orientation of the membrane, so that, now the membrane stress has a vertical component. This is the force that the trampolene exerts on you. Take a rubber band, and stretch it horizontally between your fingers. Now push down on the center of the rubber band, and feel the restoring force.
 
  • #5


I would be happy to explain the physics behind how a trampoline works. A trampoline works by utilizing the principles of energy transfer and elasticity.

When a person jumps on a trampoline, they are exerting a force on the surface of the trampoline, causing it to deform or stretch downwards. This deformation stores potential energy in the trampoline's springs or elastic material. As the person continues to jump, this stored potential energy is converted into kinetic energy, propelling the person upwards.

At the very bottom of the trampoline, the person experiences a large amount of force from the trampoline's surface as it pushes back against them. This force is due to the trampoline's springs or elastic material being compressed, storing potential energy.

As the person reaches the middle of the trampoline, they experience a brief moment of weightlessness as the forces acting on them are balanced. This is because the potential energy stored in the trampoline's springs or elastic material has been fully converted into kinetic energy, causing the person to momentarily stop moving upwards.

At the very top of the trampoline, the person experiences a decrease in force from the trampoline's surface as the springs or elastic material start to expand back to their original shape. This decrease in force causes the person to slow down and eventually start falling back towards the trampoline's surface.

In summary, the physics behind a person bouncing on a trampoline involves the conversion of potential energy into kinetic energy and back again, as well as the principles of elasticity and energy transfer. I hope this explanation helps to clarify the mechanics of a trampoline for you.
 

1. How does a trampoline work?

A trampoline works by using the principles of elasticity and momentum. When a person jumps on the trampoline, their weight compresses the fabric mat, storing potential energy. As they push off, the mat bounces back, converting the potential energy into kinetic energy, propelling the person into the air.

2. What is the purpose of the springs on a trampoline?

The springs on a trampoline are responsible for creating the tension necessary for the mat to bounce back. When a person jumps on the trampoline, the springs stretch and store potential energy. As the person pushes off, the springs release the stored energy, providing the necessary force for a higher bounce.

3. How does the shape of the trampoline affect its performance?

The shape of the trampoline plays a crucial role in its performance. A trampoline with a circular shape evenly distributes the force of a jump, resulting in a smoother bounce. Additionally, a round trampoline also allows for easier control and balance while jumping. On the other hand, a rectangular trampoline provides a higher bounce due to the increased tension on the springs in the longer sides.

4. Why do trampolines have safety nets?

Safety nets on trampolines are essential for preventing falls and injuries. They act as a barrier to keep the person within the trampoline's jumping surface, reducing the risk of falling off. Additionally, safety nets also protect against objects or people entering the trampoline while someone is jumping, preventing accidents.

5. Is jumping on a trampoline a good form of exercise?

Yes, jumping on a trampoline is an excellent form of exercise. It provides a full-body workout, engaging muscles in the legs, core, and arms. It also improves balance, coordination, and cardiovascular health. Furthermore, it is a low-impact exercise, making it suitable for people of all ages and fitness levels.

Similar threads

  • Introductory Physics Homework Help
Replies
5
Views
2K
  • Mechanical Engineering
Replies
13
Views
1K
  • Introductory Physics Homework Help
Replies
5
Views
895
  • Engineering and Comp Sci Homework Help
Replies
14
Views
2K
Replies
4
Views
4K
Replies
5
Views
829
  • Introductory Physics Homework Help
Replies
7
Views
3K
  • Special and General Relativity
Replies
12
Views
3K
Replies
3
Views
2K
  • STEM Academic Advising
Replies
12
Views
1K
Back
Top