Can Sulfuric Acid Be Safely Stored in a Plastic Container?

  • Thread starter Pete_L
  • Start date
  • Tags
    Acid
In summary, storing a solution of 35% sulfuric acid and 65% water in a plastic bottle is not recommended as the acid can react with the plastic. It is recommended to use a container specifically designed to hold acid, such as glass. Additionally, the idea of removing the electrolyte from a fully-charged lead-acid battery for later use may not be effective as the battery may require time to fully activate after the acid is poured back in. To keep a lead-acid battery usable for a long period of time, it is recommended to store it on wood blocks rather than concrete. Storing the battery at cold temperatures can also help slow down the rate of discharge. However, the need for wood blocks to prevent discharge may
  • #1
Pete_L
27
1
Can a solution of 35% sulfuric acid and 65% water be safely stored in a plastic bottle? That is, does sulfuric acid of this concentration react with any or all plastics? if plastic is not acceptable, what type of storing container could safely contain the acid?

If interested, what I have in mind here is removing the electrolyte from a fully-charged lead-acid battery to be reinserted into the cells of the battery at some future time to reactivate the battery. The purpose is to be able to have an arrangement for providing emergency 12V power with minimal maintenance, that is, avoiding the need to periodically charge the battery.

An additional concern of mine is whether or not the sulfuric acid in an uncontaminated storage container would decompose over time. If decomposition would occur, at what rate would it occur?

Searching with google, I couldn't find any information concerning this, except that it is apparently easier to store sulfuric acid in a highly concentrated form.

Thanks in advance for any information about how to go about doing this in a safe manner.
 
Chemistry news on Phys.org
  • #2
Pete_L said:
Can a solution of 35% sulfuric acid and 65% water be safely stored in a plastic bottle? That is, does sulfuric acid of this concentration react with any or all plastics? if plastic is not acceptable, what type of storing container could safely contain the acid?
Yes sulfuric acid can react with plastic. Esters in particular are easily destroyed by acid. Use glass, or a container that was specifically designed to hold acid.

If interested, what I have in mind here is removing the electrolyte from a fully-charged lead-acid battery to be reinserted into the cells of the battery at some future time to reactivate the battery. The purpose is to be able to have an arrangement for providing emergency 12V power with minimal maintenance, that is, avoiding the need to periodically charge the battery.
I have no data to back this up, but this sounds like a bad idea. It's possible that some things in the battery need to be kept wet in order to work properly, and that the battery won't work immediately after you pour the acid back into it. As an example, if the sides of the battery are separted by a membrane, it might take time before the membrane is wet enough to be usable. Or if the battery has something like a tube filled with cotton balls connecting the two sides together, that entire tube has to be set before ions can flow from one side to the other.

If you really want to keep the battery usable for a long period of time, put it on wood blocks. Car batteries tend to die very quickly if you let them sit on concrete, but they hold a charge for months/years if they sit on wood blocks.

An additional concern of mine is whether or not the sulfuric acid in an uncontaminated storage container would decompose over time. If decomposition would occur, at what rate would it occur?
The acid by itself should not decompose at any noticeable rate, but it's possible it would react with stuff left in the container. Sulfuric acid stored in a glass bottle should keep a very steady concentration over long periods of time.
 
  • #3
The case of the battery in question is made of ... plastic.
 
  • #4
reply to 12-01 post by ShawnD

Thanks for your feedback, especially the information about lead-acid batteries holding their charges well over months to a year.

At the website www.batteryfaq.org, there is an article going into lead-acid batteries retaining charge in great detail. Apparently storing the battery at cold temperatures (below freezing) is useful for slowing down the rate of discharge while the battery is not used. Conversely, warm temperatures severely curtail the length of time a battery can be stored without significantly losing its charge.

At the same site, they say that the need for supporting a battery above a concrete floor on wood to prevent discharge does not apply to contemporary lead-acid batteries constructed with plastic cases.

Regards,
Pete
 
  • #5
Interesting info you've found. Thanks for the link.
 

What is sulfuric acid and why is it important to safely store it?

Sulfuric acid is a highly corrosive and toxic chemical that is commonly used in various industries, such as manufacturing, mining, and oil refining. It is important to safely store sulfuric acid because it can cause severe burns if it comes into contact with skin, eyes, or other body parts. It can also release toxic fumes, which can be harmful to human health and the environment.

What are the potential hazards of storing sulfuric acid?

The potential hazards of storing sulfuric acid include the risk of chemical burns, inhalation of toxic fumes, and the potential for fire or explosion. Sulfuric acid is also highly reactive and can cause damage to metal, plastic, and other materials if not stored properly.

How should sulfuric acid be stored to ensure safety?

Sulfuric acid should be stored in a well-ventilated area that is specifically designated for hazardous chemicals. It should be stored in a tightly sealed container made of a non-reactive material, such as glass or certain types of plastic. The storage area should also be equipped with spill containment measures and appropriate personal protective equipment should be worn when handling the acid.

What are the important safety precautions when handling sulfuric acid?

When handling sulfuric acid, it is important to wear appropriate personal protective equipment, such as acid-resistant gloves, goggles, and a face shield. It is also important to work in a well-ventilated area and to avoid mixing sulfuric acid with other chemicals. If any spills occur, they should be immediately cleaned up with the appropriate materials and the area should be thoroughly rinsed.

What should be done in case of an emergency involving sulfuric acid?

In case of an emergency involving sulfuric acid, it is important to follow the emergency procedures and protocols set in place by the facility. This may include evacuating the area, notifying the appropriate authorities, and seeking medical attention if necessary. It is also important to have a designated emergency response team and to regularly conduct drills to ensure everyone is prepared in case of an emergency involving sulfuric acid.

Similar threads

Replies
16
Views
2K
  • Electrical Engineering
Replies
3
Views
1K
Replies
5
Views
15K
  • Materials and Chemical Engineering
Replies
6
Views
3K
  • Electrical Engineering
Replies
4
Views
9K
  • Chemistry
Replies
12
Views
11K
Replies
8
Views
9K
  • Biology and Chemistry Homework Help
Replies
2
Views
14K
Replies
2
Views
2K
Back
Top