Rate of Change of Water Level in Triangular Prism

  • Thread starter stunner5000pt
  • Start date
  • Tags
    Prism
In summary, we are given a triangular prism with a length of 10 m and an equilateral triangle as its base. Water is being added at a rate of 2m^3/min. To determine the rate of change of the water level when the water is sqrt(3) m deep, we use the equations V = (1/2)lwh and h = (sqrt(3)/2)w to find a relationship between h and w. Then, using the fact that dl/dt = 0 because the length of the column of water is constant, we can find the rate of change of the water level by substituting 1 into 2 and then solving for dh/dt. However, there is some confusion
  • #1
stunner5000pt
1,461
2
A trinagular prism is 10 m long and has an equilaterlal trinagle for its base. WAter is added at a rate of 2m^3/min. Determine the rate of change of the water level when the water is [itex] \sqrt{3} [/itex] m deep.

ok so the volume of a prism is
[tex] V = \frac{1}{2} lwh [/tex] ... (1)
l is the length
w is the width
h is the height

now dl/dt = 0 because the length of the column of water is constant

to find a relation between h and w i got this because the triangle is an equilaterla triangle

[tex] h = \frac{\sqrt{3}}{2} w[/tex] ... (2)

and it follos that
[tex] \frac{dh}{dt} = \frac{\sqrt{3}}{2}\frac{dx}{dt} [/tex] ... (3)

now subbing 1 into 2

[tex] V = \frac{1}{\sqrt{3}} lh^2 [/tex]

[tex] \frac{dV}{dt} = \frac{l}{\sqrt{3}} 2h \frac{dh}{dt} [/tex]

now here's the problem ... what is h??
h does not represent the depth of the water, does it??
it reprsnts the height of the remainder of the prism that has not been filled iwht water. so really

[tex] \frac{dh_{water}}{dt} = \frac{dh_{empty part}}{dt} [/tex]

is it reasonable to say that??

thank you for all your input!
 
Physics news on Phys.org
  • #2
stunner5000pt said:
A trinagular prism is 10 m long and has an equilaterlal trinagle for its base. WAter is added at a rate of 2m^3/min. Determine the rate of change of the water level when the water is [itex] \sqrt{3} [/itex] m deep.

ok so the volume of a prism is
[tex] V = \frac{1}{2} lwh [/tex] ... (1)
l is the length
w is the width
h is the height

now dl/dt = 0 because the length of the column of water is constant

to find a relation between h and w i got this because the triangle is an equilaterla triangle

[tex] h = \frac{\sqrt{3}}{2} w[/tex] ... (2)

and it follos that
[tex] \frac{dh}{dt} = \frac{\sqrt{3}}{2}\frac{dx}{dt} [/tex] ... (3)

now subbing 1 into 2

[tex] V = \frac{1}{\sqrt{3}} lh^2 [/tex]

[tex] \frac{dV}{dt} = \frac{l}{\sqrt{3}} 2h \frac{dh}{dt} [/tex]

now here's the problem ... what is h??
h does not represent the depth of the water, does it??
it reprsnts the height of the remainder of the prism that has not been filled iwht water. so really

[tex] \frac{dh_{water}}{dt} = \frac{dh_{empty part}}{dt} [/tex]

is it reasonable to say that??

thank you for all your input!
h is the height of the triangle so it is the depth of the water- you triangle has its vertex downward, remember?
 
  • #3
HallsofIvy said:
h is the height of the triangle so it is the depth of the water- you triangle has its vertex downward, remember?

ahhh true

the book was rather deceptive in taht it drew the triangle right side up

but that wouldn't make a difference??
 
  • #4
Yes, the depth of water is the height of the prism and which is root 3 as given.
 
  • #5
I doubt stunner5000pt is still working on this problem after 5 years.
 

1. What is the formula for calculating the rate of change of water level in a triangular prism?

The formula for calculating the rate of change of water level in a triangular prism is:
Rate of change = (change in water level) / (change in time)

2. How do you measure the water level in a triangular prism?

The water level in a triangular prism can be measured by using a ruler or measuring tape to determine the height of the water from the base of the prism. Alternatively, a graduated cylinder or other measuring device can be used to directly measure the volume of water in the prism.

3. What factors can affect the rate of change of water level in a triangular prism?

The rate of change of water level in a triangular prism can be affected by several factors, including the shape and size of the prism, the rate of water flow into or out of the prism, and the angle at which the prism is tilted.

4. How does the rate of change of water level in a triangular prism relate to the prism's volume?

The rate of change of water level in a triangular prism is directly proportional to the prism's volume. This means that as the volume of the prism increases, the rate of change of water level will also increase. Similarly, as the volume decreases, the rate of change of water level will decrease.

5. Can the rate of change of water level in a triangular prism be negative?

Yes, the rate of change of water level in a triangular prism can be negative. This would occur if the water level is decreasing over time, meaning the prism is losing water. Conversely, a positive rate of change would indicate that the water level is increasing over time, resulting in the prism gaining water.

Similar threads

  • Calculus and Beyond Homework Help
Replies
24
Views
823
  • Calculus and Beyond Homework Help
Replies
4
Views
1K
Replies
3
Views
1K
  • Calculus and Beyond Homework Help
Replies
10
Views
1K
  • Calculus and Beyond Homework Help
Replies
1
Views
1K
  • Calculus and Beyond Homework Help
Replies
5
Views
6K
  • Calculus and Beyond Homework Help
Replies
4
Views
2K
  • Calculus and Beyond Homework Help
Replies
3
Views
1K
  • Calculus and Beyond Homework Help
Replies
6
Views
1K
  • Calculus and Beyond Homework Help
Replies
15
Views
5K
Back
Top