Max Speed Electron Ejected from Chromium Metal by Light of 250 nm Wavelength

In summary, the work function of chromium metal is 7.2 x 10-19 J. By using the equation \Delta E_{light}= \Phi + KE and the given wavelength of 250 nm, the maximum speed of an electron ejected from chromium metal by light is approximately 4 x 105 m/s.
  • #1
Cursed
39
0

Homework Statement



The work function of chromium metal is 7.2 x 10-19 J. What is the maximum speed an electron can be moving if it is ejected from chromium metal by light of wavelength 250 nm? (Answer: u= 4 x105 m/s)

Homework Equations



[tex]\Phi = h v_{0}[/tex]

[tex]KE = h v_{light} - \Phi = \frac{m_{e} u^{2}_{e}}{2}[/tex]

[tex]\Delta E_{light}= \Phi + KE[/tex]


[tex]h[/tex] is Planck's constant
[tex]v_{0}[/tex] is the characteristic frequency
[tex]m_e[/tex] is the mass of an electron (9.1 x 10-31 kg)
[tex]u_e[/tex] is the speed of the electron


The Attempt at a Solution



[tex]7.2\times10^{-19} J = \frac{(9.1\times10^{-31} kg) (u^{2}_{e})}{2}[/tex]

[tex]u_e \approx 1.3 \times 10^6 m/s[/tex]
 
Last edited:
Physics news on Phys.org
  • #2
Cursed said:

Homework Statement



The work function of chromium metal is 7.2 x 10-19 J. What is the maximum speed an electron can be moving if it is ejected from chromium metal by light of wavelength 250 nm? (Answer: u= 4 x105 m/s)

Homework Equations



[tex]\Phi = h v_{0}[/tex]

[tex]KE = h v_{light} - \Phi = \frac{m_{e} u^{2}_{e}}{2}[/tex]
Keep this equation in mind.

[tex]\Delta E_{light}= \Phi + KE[/tex]


[tex]h[/tex] is Planck's constant
[tex]v_{0}[/tex] is the characteristic frequency
[tex]m_e[/tex] is the mass of an electron (9.1 x 10-31 kg)
[tex]u_e[/tex] is the speed of the electron


The Attempt at a Solution



[tex]7.2\times10^{-19} J = \frac{(9.1\times10^{-31} kg) (u^{2}_{e})}{2}[/tex]

[tex]u_e \approx 1.3 \times 10^6 m/s[/tex]
You have left out the energy of the photon, the hvlight in your earlier equation.
 
  • #3


This calculation is incorrect. The correct approach would be to use the equation KE = h v_{light} - \Phi, where KE is the kinetic energy of the ejected electron, h is Planck's constant, and v_{light} is the frequency of the light. We can rearrange this equation to solve for the maximum speed of the electron:

u_e = \sqrt{\frac{2(h v_{light} - \Phi)}{m_e}}

We can plug in the values given:

u_e = \sqrt{\frac{2((6.63\times10^{-34} J\cdot s)(3\times10^{17} s^{-1}) - (7.2\times10^{-19} J))}{9.1\times10^{-31} kg}}

u_e \approx 4 \times 10^5 m/s

Therefore, the maximum speed of the electron ejected from chromium metal by light of 250 nm wavelength is approximately 4 x 10^5 m/s.
 

What is the significance of the 250 nm wavelength in this experiment?

The 250 nm wavelength is important because it falls within the ultraviolet (UV) range, which is known to have high energy and can cause electrons to be ejected from metal surfaces. This specific wavelength is also close to the work function of chromium, meaning it is most likely to cause the release of electrons from this metal.

How does the speed of the ejected electron relate to the wavelength of light used?

The speed of the ejected electron is directly proportional to the energy of the light used, which is determined by its wavelength. In this case, the shorter the wavelength (higher energy), the faster the electron will be ejected from the chromium metal.

Why is chromium used in this experiment?

Chromium is chosen because it has a relatively low work function, meaning it requires less energy to eject electrons from its surface. This makes it easier to study the effects of different wavelengths of light on the speed of ejected electrons.

What factors can affect the speed of the ejected electron?

The speed of the ejected electron can be affected by several factors, such as the intensity of the light, the angle at which the light hits the metal surface, and the characteristics of the metal itself (e.g. work function, surface structure).

What applications can this experiment have?

This experiment can have various applications, such as studying the photoelectric effect and its relation to different wavelengths of light, understanding the properties of materials and their response to light, and potentially developing new technologies that utilize the photoelectric effect, such as solar cells.

Similar threads

  • Biology and Chemistry Homework Help
Replies
1
Views
6K
  • Poll
  • Biology and Chemistry Homework Help
Replies
1
Views
8K
  • Introductory Physics Homework Help
Replies
25
Views
2K
  • Introductory Physics Homework Help
Replies
8
Views
2K
  • Introductory Physics Homework Help
Replies
7
Views
7K
  • Introductory Physics Homework Help
Replies
4
Views
3K
  • Introductory Physics Homework Help
Replies
1
Views
2K
  • Introductory Physics Homework Help
Replies
1
Views
2K
  • Introductory Physics Homework Help
Replies
1
Views
1K
  • Introductory Physics Homework Help
Replies
1
Views
1K
Back
Top