## How to get from pump flow rate to pressure change

Hi,
Essentially what I need is a pump that will pump 40 gallons of water per hour to a height of 8 feet. Ignoring pressure losses in the lines (for now) I used the bernouli equation to determine that I need a pressure change of 3.44 psi in my pump. I found these pumps that look suitable but all list a max head far lower than the 8 feet I need. http://www.drsfostersmith.com/produc...m?pcatid=21414

I was thinking maybe just use one with a higher volume flow to compensate for the head loss. Maybe the 100 gph one? Is there a way to determine exactly what I need? Thanks!
 PhysOrg.com engineering news on PhysOrg.com >> Army ground combat systems adopts tool for choosing future warfighting vehicles>> Company pioneering new types of material for 3-D printer 'ink'>> Student-built innovations to help improve and save lives
 Recognitions: Homework Help If the pump cannot deliver a head greater than 8', increasing the flow will not compensate. Find a pump which can deliver at least 8' of head, or re-design the piping system to reduce the head loss.
 Fascinating. Fluid mechanics has always baffled me. Thanks!

## How to get from pump flow rate to pressure change

http://www.drsfostersmith.com/pic/ar...id=285&aid=282

here is their product comparison including head values.
 Out of curiosity, is there a fundamental reason why a pump that can pump 200 gph to a height of 5 feet, can't also pump 100 gph to a height of 10 feet?

 Tags head, pressure, pump
 Thread Tools

 Similar Threads for: How to get from pump flow rate to pressure change Thread Forum Replies Mechanical Engineering 14 Engineering Systems & Design 0 Introductory Physics Homework 1 Engineering, Comp Sci, & Technology Homework 1 Mechanical Engineering 3