Sumitomo's New Molten Salt Battery

In summary, the new molten salt battery has promise for being twice the energy density of lithium ion batteries, while only 10% the material cost. However, it will require careful engineering to make it work in practical applications.
  • #1
sanman
745
24
Sumitomo Corp and Kyoto University have jointly come up with a new sodium-based molten salt battery which is claimed to have twice the energy density of Lithium-ion batteries, at only 10% the material cost. They hope to bring it to market in 2015.

http://www.ytwhw.com/2011/0304/New-Sumitomo-Electric-Battery-90-Cheaper-Than-Lithium-Ion-Nikkei.html [Broken]

Molten salt battery technology has been around for decades, however a key constraint was the requirement of a high operating temperature, of around 300ºC and above. The new battery has a melting point of just 57ºC, and an operating temperature of 80ºC.

This is still considered too high for personal vehicles and electronics, with the best suitability for continuous power applications such as home power and buses. One can imagine how such a battery system could buffer against brown-outs or load-shedding from a deficient electrical grid, or even buffer solar and wind power collection between peak and lean periods. Hopefully Sumitomo and KU will continue their search for even lower operating temperature formulations.

But what if you really did want to use this battery for an electric car? What would you combine it with and how, in order to leverage this battery most effectively for good vehicle performance?

Fortunately, waste heat seems to be the easiest thing for any engine to generate, which is what this battery most needs to achieve its operating temperature. Perhaps vacuum insulation or even aerogel could also keep the battery from losing heat. Would a microturbine be useful for producing both electricity to drive electric motors, as well as heat to sustain battery operation? What would be the best way?
 
Last edited by a moderator:
Engineering news on Phys.org
  • #2
sanman said:
Sumitomo Corp and Kyoto University have jointly come up with a new sodium-based molten salt battery which is claimed to have twice the energy density of Lithium-ion batteries, at only 10% the material cost. They hope to bring it to market in 2015.

Any predictions on Wh/kg? As it is the most important value for batteries IMO.

A setup to keep it hot is easy enough, the problem seems to be preheating, which will seriously affect performance. That energy will be lost again and again, at every start-up.

And even with good insulation, much will be lost, as all batteries need to carry electrical current through conductors which are thermal conductors too.

Don't know the layout of the battery but mostly there are very few batteries that work in airtight conditions, most leaking a gas of some sort, that will be a challenge to insulate thermally. Too much insulation and you will need a cooling system, or something that releases heat after working temp is achieved.

While the concept might be light and cheap, there will be added weight and cost from maintaining working conditions.

Let's hope for a better salt in the near future.
 

1. What is Sumitomo's new molten salt battery?

Sumitomo's new molten salt battery is a type of rechargeable battery technology that uses molten salt as the electrolyte. It is developed by Sumitomo Electric Industries, Ltd. and is known for its high energy density and long-term stability.

2. How does the molten salt battery work?

The molten salt battery works by using molten salt as the electrolyte, which allows for the storage and movement of ions between the positive and negative electrodes. When the battery is charged, the ions move from the positive electrode to the negative electrode, and when the battery is discharged, the ions move in the opposite direction.

3. What are the advantages of Sumitomo's molten salt battery?

Some advantages of Sumitomo's molten salt battery include its high energy density, which allows for longer periods of energy storage, and its long-term stability, which means it can be charged and discharged repeatedly without significant loss of performance. Additionally, it is safer and more environmentally friendly compared to traditional lithium-ion batteries.

4. What are the potential applications of this new battery technology?

Sumitomo's molten salt battery has potential applications in various industries, including renewable energy storage, electric vehicles, and grid-scale energy storage. It can also be used in off-grid and remote areas to provide a reliable and sustainable source of power.

5. Is Sumitomo's molten salt battery available for commercial use?

Currently, Sumitomo's molten salt battery is still in the research and development phase, and there are no commercial products available yet. However, the company plans to begin commercial production in the near future, with a focus on electric vehicle and renewable energy storage applications.

Similar threads

  • Nuclear Engineering
Replies
30
Views
879
Replies
7
Views
2K
Replies
8
Views
821
  • Mechanical Engineering
Replies
8
Views
4K
Replies
1
Views
2K
Replies
152
Views
4K
Replies
14
Views
3K
Replies
14
Views
8K
  • Sci-Fi Writing and World Building
Replies
21
Views
856
Replies
4
Views
8K
Back
Top