Gas flows from cylinder A to cylinder B

In summary, when A and B become (A+B), and it's adiabatic, their equilibrium state is a partial vacuum.
  • #1
mune
19
0
Hi all,

Let's say we have 2 closed cylinders A and B, same volume, containing air inside. Two cylinders are connected to each other with a tube, with valve. Initially the valve is closed.

cylinder A: P=100 Pa, T= 350 k.
cylinder B: P=50 Pa, T= 300 k

now if the valve is opened, and closed when their pressure are the same.

assume no heat loss to or gain from surrounding.here my problem:
will their temperature be the same when their reach the same pressure?

my guess are...

1. yes. By ideal gas law, PV/T = mR, if P1=P2, V1=V2, then T1=T2, so the temp will be the same.

2. no. When the valve is opened, the air flows from A to B, which means the air does some flow work. By conservation of energy, the temp in B will be higher than A.

which one of me should I believe??

thanks.
 
Physics news on Phys.org
  • #2
When A and B become (A+B), and it's adiabatic, what is the equilibrium state.

Certainly the pressure will equilibrate, but what can be said of the temperature?

the temp in B will be higher than A.
How? B is starting at a lower temperature than A. How could B end up at a higher temperature?

Those are lower pressures btw. Are those gage or absolute pressures?

Remember that 1 atm = 14.7 psi = 101.325 kPa.
 
Last edited:
  • #3
what if they started with the same temperature, other condition remains the same?

assume the values are gage pressure values(but does make any difference?)
 
  • #4
what if they started with the same temperature, other condition remains the same?
Then they remain at the same temperature. At some point in time, the pressures have to equilibrate.

assume the values are gage pressure values(but does make any difference?)
I'm thinking along the lines of PV=nRT, in which the pressure is in absolute terms.

Perhaps the pressures are in absolute, in which case, they are partial vacuums, or at least very low pressures.
 
  • #5
what about the flow work? the air molecules which flow from A to B have some KE right? The KE will change into thermal E after the valved is closed?
 

What is the process of gas flow from cylinder A to cylinder B?

The process of gas flow from cylinder A to cylinder B is known as gas transfer or gas transportation. It involves the movement of gas molecules from a high-pressure region (cylinder A) to a low-pressure region (cylinder B) through a connecting channel or tube.

What factors affect the rate of gas flow from cylinder A to cylinder B?

The rate of gas flow from cylinder A to cylinder B is affected by several factors, including the pressure difference between the two cylinders, the size and length of the connecting channel, the temperature, and the type of gas being transferred.

Is it possible for gas to flow from cylinder B to cylinder A?

Yes, it is possible for gas to flow from cylinder B to cylinder A if the pressure difference between the two cylinders changes. If the pressure in cylinder B becomes higher than cylinder A, gas molecules will flow from cylinder B to cylinder A until the pressure difference equalizes.

How is the flow rate of gas from cylinder A to cylinder B measured?

The flow rate of gas from cylinder A to cylinder B is typically measured in units of volume per unit time, such as liters per minute or cubic feet per hour. This can be measured using specialized equipment, such as a flow meter, which measures the volume of gas passing through it in a given time period.

What safety precautions should be taken when transferring gas from cylinder A to cylinder B?

When transferring gas from cylinder A to cylinder B, it is important to ensure proper ventilation to prevent a buildup of gas in the surrounding area. Additionally, appropriate personal protective equipment, such as gloves and goggles, should be worn to protect against potential hazards. It is also important to follow proper handling and storage procedures for the specific type of gas being transferred.

Similar threads

  • Introductory Physics Homework Help
Replies
8
Views
725
Replies
1
Views
1K
Replies
8
Views
1K
  • Mechanical Engineering
Replies
3
Views
936
Replies
7
Views
691
  • Advanced Physics Homework Help
Replies
1
Views
1K
Replies
3
Views
1K
Replies
56
Views
3K
  • Advanced Physics Homework Help
Replies
1
Views
873
  • Introductory Physics Homework Help
Replies
33
Views
1K
Back
Top