Defination of E D and P fields

  • Thread starter omri3012
  • Start date
  • Tags
    Fields
In summary: From your answer, it seems that the dipole moment density is an artificial quantity that is created when we add a charge to the end of a vector. Dipole moments will fluctuate on an atomic scale, but when averaged out, we get the coarse-grained field E.
  • #1
omri3012
62
0
Hallo everyone,

in electrostatic we have a linear realation between E D and P, i do understand that P
is related to the polaryzation density but what about E and D? which of those represent the
overall field?
 
Physics news on Phys.org
  • #2
'E' is the electric field in free space, 'D' is the electric field within ponderable matter. Relating 'E' and 'D' requires a constitutive relation (for example, D = eE), and 'P' is taken to be the contribution to 'D' from the matter responding to 'E'.

It can be a little confusing...
 
  • #3
thanks for your reply.
from your answer i don't understand what the diffrence between D and P?
 
  • #4
P is the dipole moment per unit volume.

E is the electric field. Its field lines start and end on all charges, including the charges in the dipoles that make up P.

D is like E, except that the lines of D only start and end on free charges, and not on the charges that make up P.
 
  • #5
omri3012 said:
thanks for your reply.
from your answer i don't understand what the diffrence between D and P?

'D' is the *total* electric field within a material, 'P' is that portion that comes from the material in response to the 'E' field.

For simple linear materials:

D = eE
P = D - e_0E
 
  • #6
matonski said:
P is the dipole moment per unit volume.

That is at best an approximation for substances which can be thought to consist of independent molecules or atoms.
The polarization derives fundamentally from the conservation of charge of the substance. Hence it is possible to introduce the polarization magnetization tensor whose divergence yields the charge current vector. This tensor is not uniquely defined. E.g. in optics one sets M=0 and P=int j dt.
The relation is somewhat analogous to the relation of the magnetic vector potential to the electromagnetic field tensor.
 
  • #7
DrDu said:
That is at best an approximation for substances which can be thought to consist of independent molecules or atoms.

What are examples of substances where this approximation does not hold true?
 
  • #8
I meant that the electrons are strictly confined to these atoms and molecules. There are many examples of substances where the electrons are delocalized, e.g. semicoductors, metals.
 
  • #9
Hi,
does anybody know any textbook or article that treats this question of polarization in detail?

1) What is the correct definition of polarization?
Standard textbooks say that P is the density of dipole moment. But referred to what? Dipole moment of a charged body depends on the reference point.

2) And then, how to prove the relation div P = -rho?
Textbooks say that the polarized body with density P creates the same potential as a body with no polarization at all but with the charge density of -div P. So what we have is in fact equality between two integrals. But we know very well that from this we can not always infer the equality of integrands, right? As a contra-example, the dipole moment of the body with respect to the origin of coordinates is

[tex]
\boldsymbol p = \int \boldsymbol r \rho dV = \int \boldsymbol P dV
[/tex]

Clearly the integrands are not the same.

And furthermore, this argument with potential works only in static situation; but we use the Maxwell's equations with polarization for optic and radiative phenomena...
 
  • #10
A definition of the polarization and magnetization which goes beyond the dipole approximation and which is especially suitable for the discussion of molecular systems can be found e.g. in these lecture notes of Claude Cohen Tannoudji (in French):
http://www.phys.ens.fr/cours/college-de-france/1986-87/cours9/cours.pdf
Or in Molecular Quantum Electrodynamics of D. P. Craig,T. Thirunamachandran; Dover Publications.
These definitions can be taken over to solid systems only if the solid can be thought to be consisting of appreciably non-overlapping entities to which the above decomposition can be applied.
When this is not the case, one usually sets M=0 and [tex] P=\int_{-\infty}^t j dt [/tex], see, e.g., Electrodynamics of continuous media, Lev Davídovich Landau,Evgenij M. Lifšic.
 
Last edited by a moderator:
  • #11
Thank you DrDu, I will read it carefully. But on the first glance, the method of Tannoudji is quite suspicious - why do we need to use artificial line of dipoles and Fourier's transformation? That is not very convincing. Simple relations should reflect simple physical picture. Besides, when we introduce the dipole line instead of the charge at the end of [tex]{\boldsymbol r}_{\alpha}[/tex], we manufacture a new charge [tex]-q_\alpha}[/tex] at the beginning of [tex]{\boldsymbol r}_{\alpha}[/tex], but it was not there before...
 
  • #12
Hmmm, all the textbooks I've read call D an artificial mathematical quantity. E is the real physical macroscopic electric field in the medium. I.e. the real electric field will be rapidly fluctuating on the atomic scale, but if you average out the short distance fluctuations, you get the so-called coarse grained macroscopic electric field, which is the E field.

The E field contains contributions from induced dipole moments. When doing computations, you don't a priori know what the dipole moment density P is. It is possible to subtract this contribution from E and then you obtain the D field. The usual arguments then lead to equations like D = epsilon E, and

Div D = rho_free

which together with boundary conditions allow you to compute the electric field in dielectric media.
 
  • #13
The introduction of D and P is independent from any coarse graining or macroscopic averaging.
This obviously does not mean that it is not usefull to consider coarse grained P and D, but that these can be calculated from the microscopic quantities, see e.g. S. Adler, Phys Rev (1962) vol 126, pp. 413.
In fact, P it is only a reformulation of charge conservation, see e.g.:
http://arxiv.org/abs/physics/9907046
or R.G. Woolley, Int J Quantum Chem, (1999), Vol 74., pp. 531, who also discusses the multipolar hamiltonian which is quite a standard at least in molecular physics.
Especially, polarization does not equal the dipole moment density in general and Jano L. realized quite correctly that the latter approximation is ambiguous as it depends on the choice of the reference points.
 
  • #15
Ok omri, are there still open questions then?
The E field is still the true E field (eventually one considers only some average values of it), while the polarization is an alternative way to describe the electric charges and currents of the medium.
 
  • #16
Count Iblis,
that most textbooks say D and H are secondary is true, however it is not very clear why. In the matter, there is no way to measure the fields E and B, so all of these four quantities get the same reality. Furthermore, EDBH still survives everywhere, equations look nice and also Maxwell used them. If I remember correctly, he had an idea that even the free charges are just the result of nonuniform polarization of vacuum, described by D: [tex]\rho_{free} = div D[/tex].
When I read the last part of your message, I recalled an amusing result: did you know that in a linear dielectric [tex] D = \epsilon E [/tex] implies [tex]\rho = \epsilon_r \rho[/tex], so that [tex]\rho = 0[/tex] always? The whole argument have a meaning just for nonlinear or anisotropic media...
 

1. What is the definition of E, D, and P fields?

The E, D, and P fields are three components of the electromagnetic field that describe the strength and direction of electric and magnetic forces on a charged particle. E stands for electric field, which is created by electric charges and exerts a force on other charges. D stands for displacement field, which describes the amount of electric flux through a surface. P stands for polarization field, which is a measure of the dipole moment per unit volume of a material in an electric field.

2. How are E, D, and P fields related to each other?

The E, D, and P fields are related through the fundamental equations of electrodynamics, which describe the behavior of electric and magnetic fields. These equations show how changes in one field can induce changes in the other fields, and how they all interact to create electromagnetic waves.

3. What are the units of measurement for E, D, and P fields?

The units of measurement for E, D, and P fields depend on the system of units being used. In SI units, E and D fields are measured in volts per meter (V/m), while P field is measured in coulombs per square meter (C/m^2).

4. How are E, D, and P fields used in practical applications?

E, D, and P fields have numerous practical applications in fields such as telecommunications, electronics, and medical imaging. They are also used in the study of materials and their properties, as well as in the design and analysis of electronic circuits and devices.

5. How do E, D, and P fields differ from other types of fields?

E, D, and P fields are specific types of fields that are part of the electromagnetic field. They differ from other types of fields, such as gravitational fields, in terms of the forces they exert and the properties of the particles they act on. E, D, and P fields also have unique mathematical properties and relationships that distinguish them from other types of fields.

Similar threads

Replies
7
Views
752
Replies
4
Views
801
Replies
8
Views
525
  • Classical Physics
Replies
0
Views
97
Replies
7
Views
958
Replies
3
Views
737
  • Classical Physics
Replies
4
Views
715
Replies
12
Views
689
  • Classical Physics
Replies
1
Views
1K
Replies
2
Views
754
Back
Top