Work and Electricity - Peter G

In summary, the conversation discusses the movement of electrons in a battery and how work must be done on them to push them from the positive to the negative terminal. The book mentions that this is due to the use of conventional current, where the positive end of the battery has a higher potential than the negative end. The e.m.f. or work done per unit charge to move the electrons around the circuit is the potential difference across the battery.
  • #1
Peter G.
442
0
Hi,

My book says the electrons must be pushed from the positive to the negative terminal, which means work must be done on the electrons.

I find it a bit confusing. Is the book saying that because we are using the conventional current? Meaning that the positive end of the battery has a high potential and the left end a lower potential hence charge must flow from positive to negative. Then in that case, work would have to be done on the charges (electrons) to make them move against the forces of attraction, since, normally, electrons would move the other way?

Thanks,
Peter G.
 
Physics news on Phys.org
  • #2
In a battery for example the chemical reaction inside moves electrons from + to -. That requires energy. That energy is then released again as the electrons move back through the circuit.
 
  • #3
Ok and just one more thing: The e.m.f, that is, the work done per unit charge to move it around the circuit is actually the potential difference across the battery (therefore E.m.f - Ir)?
 

1. What is the relationship between work and electricity?

The relationship between work and electricity is that electricity is a form of energy and work is the transfer or use of energy. In order for electricity to do work, it must flow through a circuit and be converted into other forms of energy, such as heat or light.

2. How is electricity used to do work?

Electricity is used to do work by flowing through a circuit and powering devices or machines. This can include lighting a lightbulb, running a motor, or charging a phone. The amount of work that can be done by electricity depends on the amount of electrical energy and the efficiency of the device being powered.

3. What is the unit of measurement for work in relation to electricity?

The unit of measurement for work in relation to electricity is the watt (W). This measures the rate of energy transfer or the amount of work done per unit of time. It is equivalent to one joule (J) of energy per second.

4. How is electricity generated to do work?

Electricity is generated to do work by using a generator, which converts mechanical energy into electrical energy. This can be done through various methods such as using a turbine and steam in a power plant, or through renewable sources such as solar panels or wind turbines.

5. What are some safety precautions to take when working with electricity?

Some safety precautions to take when working with electricity include wearing proper protective gear, turning off power sources before handling electrical components, and avoiding contact with live wires. It is also important to follow electrical codes and regulations and to have a thorough understanding of electricity and how it works.

Similar threads

  • Introductory Physics Homework Help
2
Replies
44
Views
2K
Replies
22
Views
1K
  • Introductory Physics Homework Help
Replies
7
Views
1K
  • Introductory Physics Homework Help
Replies
10
Views
731
  • Introductory Physics Homework Help
Replies
5
Views
1K
  • Introductory Physics Homework Help
Replies
14
Views
637
Replies
4
Views
355
  • Introductory Physics Homework Help
Replies
17
Views
2K
  • Introductory Physics Homework Help
Replies
9
Views
1K
  • Introductory Physics Homework Help
Replies
18
Views
1K
Back
Top