[Help]Remote control Program

In summary, the conversation involves someone looking for assistance in writing a remote control program that is compatible with infra red devices and can learn the frequency of other remote controls, mainly for use with a notebook. They mention finding a helpful website, epanorama.net, which has a variety of resources and recommends using the uICE software for this purpose.
  • #1
CartoonKid
125
0
Anybody here know how to write a remote control program which is compatible with infra red device? Besides, it also have to be able to learn the frequency of other remote control. Mainly use for notebook. Thanks.
 
Computer science news on Phys.org
  • #2
I don't know how to code it myself, but the internet is my playground. A quick search yielded this site:
http://www.epanorama.net/links/irremote.html

It has a ton of good info and if you scroll down to 'Software' you should find the help you need. I think the uICE - The universal Infrared Control Engine is what you are looking for. Plus many good docs on the workings of ir transmition.

Happy hunting.
 
Last edited:
  • #3


There are a few different ways you could go about writing a remote control program for an infra red device that can also learn the frequency of other remotes. One option is to use an existing software development kit (SDK) or library that has built-in support for infra red communication. This could save you a lot of time and effort, as the SDK or library will handle the low-level details of sending and receiving infra red signals.

Another option is to write the program from scratch using a programming language like C or C++. In this case, you would need to have a good understanding of how infra red communication works and be able to write code to send and receive signals. You could also use a microcontroller or Arduino board to act as the interface between your computer and the infra red device.

Whichever approach you choose, it's important to make sure that your program is compatible with the specific infra red device you are using. This may require some research or contacting the manufacturer for technical specifications.

As for learning the frequency of other remote controls, this can be achieved by using a receiver to capture the signal from the remote and then analyzing it to determine the frequency. This information can then be stored in your program so that it can emulate the same frequency when sending signals to the infra red device.

Overall, writing a remote control program for an infra red device can be a challenging but rewarding task. It's important to have a good understanding of the technology and to thoroughly test your program to ensure it works correctly. Best of luck with your project!
 

What is a remote control program?

A remote control program is a software application that allows users to access and control a computer or other electronic device from a remote location. This can be useful for troubleshooting, remote support, and remote collaboration.

How does a remote control program work?

A remote control program works by establishing a connection between two devices, typically a local device and a remote device. This connection is often made through the internet or a local network. Once the connection is established, the user can control the remote device as if they were physically present at that location.

What are the benefits of using a remote control program?

The benefits of using a remote control program include the ability to access and control devices from a remote location, increased efficiency and productivity, and the ability to provide remote support and troubleshooting without being physically present.

Are remote control programs secure?

Most remote control programs have security measures in place, such as encryption and password protection, to ensure that the connection between devices is secure. However, it is important to use reputable and trusted remote control programs to minimize the risk of security breaches.

What are some common features of remote control programs?

Some common features of remote control programs include screen sharing, file transfer, remote printing, and remote rebooting. Some programs also offer additional features such as session recording, voice and video chat, and multi-monitor support.

Similar threads

  • Computing and Technology
Replies
7
Views
1K
  • Computing and Technology
Replies
10
Views
2K
Replies
2
Views
1K
Replies
5
Views
1K
Replies
39
Views
5K
  • Computing and Technology
Replies
9
Views
1K
Replies
11
Views
1K
  • Computing and Technology
Replies
1
Views
5K
Replies
2
Views
1K
  • STEM Academic Advising
Replies
5
Views
885
Back
Top