Maxwell - Faraday equation.

In summary, the conversation discusses the concept of self-induction and induction between two coils. The equation for induced emf in a loop is V = -d\phi/dt, which states that a change in magnetic flux through a loop results in an induced emf. The conversation raises the question of what happens when there is self-induction and induction between two coils, and whether it requires an infinite amount of energy. The answer is no, as self-inductance always acts in opposition to the change in current, causing the two coils to reach equilibrium without any external energy input. This results in a continuous exchange of energy between the two coils.
  • #1
Sefrez
126
0
This may be a stupid question, but nonetheless it is confusing me (maybe I am stupid :p)

The equation states that there is an induced emf in a loop when there is a change in magnetic flux through that loop. Or V = -d[itex]\phi[/itex]/dt

Though how does it work when you have self induction and induction created on another coil at which can then re-induce the one that started this loop? Is this even possible? If you had, say two solenoids, one in the other, then putting a varying current through the outer one would induce a current in the center one. If the outer coil's change in current is modeled linear as a function of time, then according to the equation, the induced emf in the center coil would be constant. This would mean that there is no run around change in flux back through the outer coil.

But what if the current through the outer coil was modeled by e^t, or even something like e^(2t)? Then, by the equation, the induced emf on the inner coil is increasing with time, and thus there is a change in flux though the outer coil which is what started the whole process. The "infinite'th" derivative of e^t is the same, and with e^(2t), it continuously increases.

When inducing this emf on the inner coil, it is in a direction opposing the change in current of the outer. But when it raps back around (inner inducing outer) it is in the same direction the current is already going.

I know this cannot be possible as energy would not be conserved.

So, my question is, what happens here? Do you need an infinite amount of energy to achieve re-induction of the outer coil or something?

Again, maybe this is a stupid question and I am not thinking clearly. It sounds like a bunch of bogus to me.
 
Physics news on Phys.org
  • #2
The answer to your question is no, you do not need an infinite amount of energy to achieve re-induction of the outer coil. The key to understanding this phenomenon is to realize that self-inductance always acts in opposition to the change in current. That is, when the current through the outer coil is increasing, the self-induced emf in the outer coil will be in the opposite direction to the increasing current, thus opposing the increase in current. The same is true for the inner coil; the self-induced emf will oppose the increase in current. This means that the two coils are essentially competing against each other in terms of how much current they can induce in the other. It is possible that one coil can win this competition if it has a larger self-inductance than the other, but this is unlikely. In most cases, the two coils will reach equilibrium at some point, where the self-induced emf in each coil is equal and opposite to the current in the other coil. In terms of energy, the two coils are exchanging energy back and forth. This causes the system to reach equilibrium without any external energy input.
 

1. What is the Maxwell-Faraday equation?

The Maxwell-Faraday equation is a fundamental equation in electromagnetism that describes the relationship between a changing magnetic field and an induced electric field. It is one of Maxwell's equations, which together form the basis of classical electromagnetism.

2. Who discovered the Maxwell-Faraday equation?

The Maxwell-Faraday equation was discovered by Scottish physicist James Clerk Maxwell and English scientist Michael Faraday. Maxwell first published the equation in his 1865 paper "A Dynamical Theory of the Electromagnetic Field," while Faraday had previously observed the phenomenon of induced electric fields in a changing magnetic field.

3. How does the Maxwell-Faraday equation relate to electromagnetic induction?

The Maxwell-Faraday equation explains the process of electromagnetic induction, which occurs when a changing magnetic field induces an electric field in a conductor. This phenomenon is the basis for the function of generators and transformers, which are essential components in many electronic devices.

4. Can the Maxwell-Faraday equation be derived from other equations?

Yes, the Maxwell-Faraday equation can be derived from the other three Maxwell's equations, specifically the Gauss's law for electric fields and the Ampere's law for magnetic fields. It can also be derived from the Lorentz force law, which describes the force exerted on a charged particle in an electric and magnetic field.

5. How is the Maxwell-Faraday equation used in practical applications?

The Maxwell-Faraday equation has numerous practical applications, including in the design of electric motors, generators, and transformers. It is also used in electromagnetic interference shielding, wireless charging, and the development of new technologies such as wireless power transfer and magnetic levitation.

Similar threads

  • Introductory Physics Homework Help
Replies
3
Views
1K
  • Introductory Physics Homework Help
Replies
1
Views
148
  • Introductory Physics Homework Help
Replies
4
Views
1K
  • Introductory Physics Homework Help
Replies
7
Views
297
  • Introductory Physics Homework Help
Replies
1
Views
201
  • Introductory Physics Homework Help
Replies
6
Views
1K
  • Introductory Physics Homework Help
Replies
6
Views
735
  • Introductory Physics Homework Help
Replies
8
Views
2K
  • Introductory Physics Homework Help
Replies
1
Views
120
  • Introductory Physics Homework Help
Replies
11
Views
383
Back
Top