Is Energy-to-Mass Conversion Possible According to E=mc²?

  • Thread starter jobyts
  • Start date
In summary, energy can be converted to mass as per the E=mc^2 equation, and this can theoretically happen anywhere in the universe. However, most commonly this occurs in particle accelerators or in natural and artificial nuclear reactions. In order to convert mass to energy, nuclear fission or fusion is often used as nuclear forces are much stronger than electromagnetic forces. This is due to the fact that energy and mass are not freely interchangeable and specific conditions must be met for the conversion to occur. Additionally, the probability of a system undergoing a conversion between mass and energy is a measure of its stability. While E=mc^2 is a fundamental equation, in some situations, a full conversion of mass to energy may not be achieved due to efficiency issues
  • #1
jobyts
227
64
Can energy be converted to mass as per the E=mc^2 equation? Theoretically, how to convert energy to mass? Does it happen anywhere in the universe?

Another related question, why do we need to do nuclear fission or fusion to convert the mass to energy? Does physics have an explanation why mass and energy are not freely interchangable?
 
Physics news on Phys.org
  • #2
jobyts said:
Can energy be converted to mass as per the E=mc^2 equation? Theoretically, how to convert energy to mass? Does it happen anywhere in the universe?

Yes. Most commonly this occurs in particle accelerators. You can take two light particles, e.g., an electron and a positron, accelerate them to high kinetic energies, and collide. The products of such an collision many include much heavier particles, like protons and neutrons.

jobyts said:
Another related question, why do we need to do nuclear fission or fusion to convert the mass to energy? Does physics have an explanation why mass and energy are not freely interchangable?

The conversions mass->energy and energy->mass occur around us all the time. For example, when light is emitted by an atom, the atom experiences a transition from a high mass state to a low mass state. However the mass differences are normally too small to be visible, because electromagnetic forces are relatively weak. Nuclear forces are much stronger. This is the reason why mass changes and energies released in nuclear reactions are so much higher.

Eugene.
 
  • #3
Yes, it happens all the time in
matter-antimatter reactions, natural and artificial
nuclear reactions, ordinary chemical reactions, etc.

Everywhere there's a change in energy there's a change in
mass.

The "binding energy" of nucleons is converted to mass
when the nucleons disassemble from the nucleus.

Energy itself, via the equivalence relationship, has
mass, so in some senses there isn't a distinction except
when you specify the form and type of energy --
rest mass of particles, energy contained in rest-massless
particles like photons, potential energy of bound nucleons,
chemical bond energy, energy in gravitational fields,
energy in electromagnetic fields, etc.

So you don't "need" a particular kind of reaction
(nuclear or antimatter) to convert mass to energy, but
to convery substantial amounts of one to the other
quickly, those are noteworthy possibilities.
 
  • #4
As to why they're not "freely" interchanged, well they
are, to a point.

As you study particle physics, quantum physics, chemistry,
et. al. you learn that there are specific possible reactions
or transitions, emissions, absorbtions, conversions,
et. al. that can occur.

There are also specific states or events that can be
observed to exist, for instance, there's a possibility that
an electron positron pair can materialize from the
vacuum field and exist for a while, then come together
and annihilate into high energy photons. Energy
shifts from field energy to mass energy back to field energy.


There can be assigned specific probabilities that such
conversions/events/transitions will occur depending on
the involved energies, momenta, fields, temperature,
et. al.

Sometimes such events are highly probably and occur
frequently, such as the explosion of a firecracker in a
fire, or the melting of an ice cube on a hot day.

Other times such events are improbable to occur at
low temperatures / energies, such as the break-up of an
iron nucleus into individual nucleons, or a piece of rock
catching fire on a cold day spontaneously. It's *possible*,
but very unlikely without a lot of added energy to help
the process occur.

It's like the reaction probability and rate and equilibrium
in chemistry, and also it's similar to the consideration
of the activation energy of a process -- without the right
energy input, even a process that will release a lot of
energy may be unlikely to occur. Thus the stored energy
in a firecracker takes added heat/energy in the form
of lighting the fuse before it'll become released with any
likelihood.

So you can say that the probability of a system *not*
undergoing a given conversion between mass/energy
is a measure of its stability.

In just a few minutes free neutrons will probably
'spontaneously' convert (decay) into a proton, electron,
and added energy. Whereas a neutron inside a nucleus
is usually quite stable and will probably stay there without
decay for a long time in most (non-radioactive) nuclei.

In contrast a free proton at normal energies will
probably not decay or change into anything else even if
you waited billions of years.

If bound neutrons or protons were *not* so stable, we'd
not be here discussing this topic now, because billions of
years ago all the normal matter that makes up our
bodies / planet / solar system / galaxy would have decayed
into other kinds of matter/energy and we'd never have
existed.

So the reason the mass and energy doesn't seem so
freely interchangable is that the universe we're familiar
with in ordinary conditions is a 'cold' fairly low-energy
place where in ordinary circumstances on Earth matter
is stable in the chemical and atomic states it exists in,
and large scale changes of energy/mass do not occur due
to the stability of matter at low temperatures/energies.
Were that not the case, the planet would've "burned up"
and we (being fragile creatures that can live only in
very delicately balanced environmental conditions)
wouldn't exist.
 
  • #5
Whereas at the beginning stages of the universe things
were at very high energies and temperatures, and
there was a large scale shift of kinds of particles,
photons, etc. back and forth to various other kinds of
energies/particles. As the universe cooled, normal
matter like the protons/neutrons/photons/electrons
that make up most of the universe today came into
existance and their stability increased so
that interconversions became less and less likely in most
places other than inside stars or similar high energy
high temperature places.
 
  • #6
i have heard that E=mc^2 has some defalts in some situations.is it true and how?
 
  • #7
Karthikthe said:
i have heard that E=mc^2 has some defalts in some situations.is it true and how?

I've never heard of that. Can you cite a source? As far as I know, it's an immutable formula. It is very seldom, however, that full conversion is achieved. An H-bomb, for instance, converts only about 1% of the mass to energy. Perhaps it's an efficiency issue that you're thinking of?
 
  • #8
jobyts said:
Can energy be converted to mass as per the E=mc^2 equation? Theoretically, how to convert energy to mass? Does it happen anywhere in the universe?

Another related question, why do we need to do nuclear fission or fusion to convert the mass to energy? Does physics have an explanation why mass and energy are not freely interchangable?

Any physical process that occurs must satisfy a whole slew of conservation laws. These are what allow certain states to be stable, and what prevents large-scale mass => energy conversion from being too common.

All known processes obey the conservation of: energy, momentum, angular momentum, electric charge, color charge, baryon number, and lepton number (and quark and lepton flavors are mostly, but not always, conserved as well); although it is generally accepted that baryon and lepton numbers should not be conserved at higher energies than we've been able to probe.

The application of these conservation laws is actually sufficient to predict exactly what kinds of interactions can occur and what cannot. For example, the conservation of electric and color charges, together with baryon and lepton numbers suggests that a proton might be able to decay into a neutron a positron and an electron neutrino. However, energy conservation will not allow it, as the mass of a neutron is larger than that of a proton.
 
  • #9
Karthikthe said:
i have heard that E=mc^2 has some defalts [exceptions?] in some situations.is it true and how?
Energy is always equivalent to relativistic mass, but for moving particles it is more common to express energy in terms of rest mass, in which context this formula is just a special (stationary) case.
 
  • #10
well, its possible to change an objects rest mass isn't it...
 
  • #11
Reading some of the responses to energy mass conversion question, has prompted me to ask the experts in this forum the following question:
What would be the length of time that visible light would be emitting from a very efficient process of converting enough energy into a body of mass of 6.0×(10 to the 24th power) KG ?
 

1. What is the concept of energy-mass conversion?

The concept of energy-mass conversion, also known as mass-energy equivalence, is based on Albert Einstein's famous equation, E=mc^2. This equation states that energy and mass are two forms of the same thing and can be converted into one another. This means that a small amount of mass can be converted into a large amount of energy, and vice versa.

2. How does energy-mass conversion occur?

Energy-mass conversion can occur through various processes such as nuclear reactions, where the nuclei of atoms are split or fused, releasing or absorbing energy. It can also occur through the annihilation of matter and antimatter, where both particles are converted into pure energy.

3. What are some real-world applications of energy-mass conversion?

Energy-mass conversion has several real-world applications, including nuclear power plants that use nuclear reactions to generate electricity, nuclear weapons, and medical imaging techniques such as PET scans that use annihilation of matter and antimatter to produce images.

4. Can energy-mass conversion be observed in everyday life?

While energy-mass conversion is constantly occurring in the universe, it is not easily observable in everyday life. This is because the amount of mass needed to produce a significant amount of energy is incredibly small, making it difficult to detect. However, its effects can be seen in nuclear reactions and other processes mentioned above.

5. Are there any limitations to energy-mass conversion?

Energy-mass conversion is limited by the amount of energy and mass that is available for conversion. This means that while it is a powerful concept, it is not a limitless source of energy. Additionally, the conversion process can only occur under certain conditions and is not easily controllable, making it a challenging process to harness for practical use.

Similar threads

  • Other Physics Topics
Replies
11
Views
3K
  • Introductory Physics Homework Help
Replies
28
Views
796
  • Other Physics Topics
Replies
2
Views
934
Replies
8
Views
766
Replies
18
Views
3K
  • Other Physics Topics
Replies
5
Views
3K
  • Other Physics Topics
Replies
13
Views
2K
  • Other Physics Topics
Replies
2
Views
891
  • Other Physics Topics
Replies
12
Views
3K
Replies
15
Views
1K
Back
Top