BJT single stage amplifier we write gm=Ic/VTby pforpashya Tags: amplifier, gmic or vt, single, stage, transconductance, write 

#1
Feb2014, 04:05 AM

P: 11

For BJT single stage amplifier we write gm=Ic/VT where VT is Thermal voltage whose value is 26mv. Now if we have a Darlington pair i.e. two transistor connected in CCCC mode what will be overall gm.
Will the collector current Ic be divided by 52mv or 26mv. (Because in gain equation gm comes) as their are two forward active PN junctions ...the cumulative change in VT is 52mV? is this correct? can someone through light on "why we have to include Boltzmann constant in calculation of VT" in simple words? Thanks in advance 



#2
Feb2014, 08:58 AM

P: 997

Each device has g_{m} value equal to its own I_{c} divided by V_{T}, where V_{T} is 25.7 mV for each device. For a Darlington, if the input device is no. 1, and output device is no. 2, then I_{e1} = I_{b2}, I_{c1} = α_{1}*I_{e1}, I_{c2} = β_{2}*I_{b2}, or I_{c2} = α_{2}*I_{e2}, .
This should get you started. Claude 



#3
Feb2014, 09:34 PM

P: 11

ok. thank you for your reply. to find overall gm (i.e. gm2 as gm1 of first pair in darlington is very small) of the device should i divide Ic2 by VT1+VT2 i.e. 52mV?




#4
Feb2114, 10:34 AM

P: 389

BJT single stage amplifier we write gm=Ic/VT
Yes you should use 2*Vt if you want to find voltage gain.
The small signal gain for CE amplifier is equal to [itex]\Large \frac{Vout}{Vin} =\frac{Rc (\beta 1+\beta 2+\beta 1 \beta 2)}{(1+\beta 1) (re1+re2+re2 \beta 2)} [/itex] Where re1 ≈ 1/gm1 re2 ≈ 1/gm2 



#5
Feb2114, 11:37 AM

P: 11

Thanks alot...I have to solve one unsolved problem on darlington pair before saturday. I hope i will get right answer as i have to just multiply gm by output resistance of darlington pair.




#6
Feb2114, 11:39 AM

P: 11

can someone through light on "why we have to include Boltzmann constant in calculation of VT"
in simple words? 


Register to reply 
Related Discussions  
Need help with transconductance operational amplifier  Electrical Engineering  3  
Calculate the Transconductance for a MOSFET, given W,L,Vg,Vd,u,Cox but not Vth  Engineering, Comp Sci, & Technology Homework  0  
anybody plz solve this mosfet transconductance problem ....  Electrical Engineering  1  
Operational Transconductance Amplifier Layout  Electrical Engineering  3  
Transconductance of a differential pair  Electrical Engineering  4 