Need help with thin film interference

AZING!In summary, the first two non-zero thicknesses of an air film for which there will be constructive interference for reflection off the surfaces of the bubble for light of wavelength 655 nm in water are 218 nm and 653 nm, with the correct answer being option B. This is due to the quarter wave coatings minimizing reflected glare by making the reflected wave from the air/film surface out of phase with the reflected wave from the film/glass surface, resulting in these two reflections destructively interfering. The thickness of the air film has to be a quarter of the wavelength of the light in air and the next three quarters of the wavelength.
  • #1
pnazari
10
0
A student diving in a swimming pool (filled with water with index of refraction
1.33) creates thin films of air. Viewed underwater, what are the first two non-zero thicknesses of an air film for which there will be constructive interference for reflection off the surfaces of the bubble for light of wavelength 655 nm in water
a. 123 nm, 369 nm
b. 218 nm, 653 nm
c. 218 nm, 873 nm
d. 246 nm, 492 nm
e. 436 nm, 871 nm
f. 436 nm, 1091 nm

The answer is B, but I keep getting D. Here is what I have done:

Lambda=2nd/m (m=1,2,3..,n=index,d=thickness)

d=Lambda(m)/2n=246nm=WRONG! Need help please. Thanks in advance.
 
Physics news on Phys.org
  • #2
pnazari said:
A student diving in a swimming pool (filled with water with index of refraction
1.33) creates thin films of air. Viewed underwater, what are the first two non-zero thicknesses of an air film for which there will be constructive interference for reflection off the surfaces of the bubble for light of wavelength 655 nm in water
Tricky problem.

It has been a while since I have looked at this area but I do recall from optics that quarter wave coatings minimize reflected glare by making the reflected wave from the air/film surface out of phase by [itex]\pi[/itex] with the reflected wave from the film/glass surface, resulting in these two reflections destructively interfering. Since the light from a lower index of refraction medium meeting a higher one (air to film and film to glass) will reflect with a 180 degree phase shift at both surfaces, we don't have to worry about the phase change on reflections. So the distance of travel through the film (i.e from air/film surface to the glass surface and back to the air/film surface) just has to be a half wavelength longer. So the thickness of the film has to be [itex]\lambda/4[/itex].

When light (or any wave) goes from a higher index to a lower index medium it
does not have a 180 degree phase shift. The reflected wave is in phase with the incident wave. But the reflected wave from the other surface (air to water) does have a 180 degree phase shift because it is going from a low to high index medium. That is the key to this problem.

To provide CONSTRUCTIVE interference (maximum reflection), a phase shift of [itex]2\pi[/itex] is required. A [itex]\pi[/itex] shift is provided by the reflection from the air to water surface. So the two way travel through air has to produce a [itex]\pi[/itex] phase shift. This means that the thickness of air has to produce a [itex]\pi/2, 3\pi/2, 5\pi/2 ...[/itex] phase shift, so the minimum would be a quarter of the wavelength of the light in air and the next 3/4 wavelength. Since [itex]\lambda_{air} = 1.33 \times 655 nm = 871 \text{nm}[/itex] you have your answer.

AM
 
Last edited:
  • #3


Hi there, thank you for reaching out for help with thin film interference. It seems like you have the right formula, but your calculations may have some errors.

To find the first two non-zero thicknesses of an air film for constructive interference, we can use the formula d = λ/2n, where λ is the wavelength of light in the medium (in this case, water), and n is the index of refraction of the medium (in this case, air). We can also use the m value to find different thicknesses that will result in constructive interference.

Let's start by finding the first thickness, d1:

d1 = λ/2n = (655 nm)/(2 x 1.33) = 246 nm

This matches your answer for d1, so it seems like you have this part correct.

To find the second thickness, d2, we can use the same formula but with a different m value. In this case, we want to find the thickness for constructive interference with m = 2:

d2 = λ/2n = (655 nm)/(2 x 2.66) = 123 nm

This matches the first option, a, which means the correct answer is B.

I hope this helps clarify the problem and your calculations. Keep up the good work!
 

1. What is thin film interference?

Thin film interference is a phenomenon that occurs when light passes through a thin layer of a material, such as a soap bubble or a layer of oil on water. The light waves reflect off both the top and bottom surfaces of the film, causing constructive and destructive interference patterns.

2. How does thin film interference affect the colors we see?

The interference patterns created by thin films can cause certain wavelengths of light to be amplified or cancelled out, resulting in different colors being observed. This is why we see colorful patterns on soap bubbles or oil slicks.

3. What factors influence thin film interference?

The thickness of the film, the refractive index of the material, and the angle of incidence of the light all play a role in thin film interference. These factors determine the path lengths of the light waves and the phase difference between them, which ultimately affects the interference pattern.

4. How is thin film interference used in technology?

Thin film interference is used in many modern technologies, such as anti-reflective coatings on glasses and camera lenses, color filters in LCD screens, and optical coatings on solar panels. It is also used in scientific instruments, such as spectrometers and interferometers.

5. Can thin film interference be observed in everyday life?

Yes, thin film interference can be observed in many everyday situations. For example, the colorful patterns on soap bubbles and oil slicks, the colors on the wings of certain insects, and the rainbow-like colors on CDs and DVDs are all due to thin film interference.

Similar threads

Replies
3
Views
1K
  • Introductory Physics Homework Help
Replies
2
Views
778
  • Introductory Physics Homework Help
Replies
1
Views
2K
  • Introductory Physics Homework Help
Replies
7
Views
5K
  • Introductory Physics Homework Help
Replies
2
Views
2K
  • Introductory Physics Homework Help
Replies
6
Views
3K
  • Introductory Physics Homework Help
Replies
3
Views
3K
  • Introductory Physics Homework Help
Replies
3
Views
1K
  • Introductory Physics Homework Help
Replies
14
Views
2K
  • Introductory Physics Homework Help
Replies
9
Views
3K
Back
Top