Coefficient of restitution problem?

In summary: So, in summary, the coefficient of restitution is the ratio of the speed of the ball after it rebounds from the impact to the speed of the ball right before it hits the floor.
  • #1
fightboy
25
0
The coefficient of restitution, e, of a ball hitting the floor is defined as the ratio of the speed of the ball after it rebounds from the impact to the speed of the ball right before it hits the floor.
Derive a formula for the coefficient of restitution when a ball is released from an initial height H and rebounds to a final height h.

The textbook solution is set up this way:
Before: mgH=1/2mv2before
vbefore=√2gH

After: 1/2mv2after=mgh
vafter=√2gh
With the final answer being e= √(h/H).
I'm confused on the set up, where do the before and after equations come from, particularly mgH and mgh? I know mgy is the gravitational potential energy at a given height, but why is it set equal to 1/2mv2 in the before and after equation?
 
Physics news on Phys.org
  • #2
Their solution comes from conservation of energy. [itex]mgH[/itex] is set equal to [itex]\frac{1}{2}mv^2[/itex] because the gravitational potential energy is converted to kinetic energy (and vice versa, on the way up).
 
  • #3
The ball motions under the influence of a conservative force -gravity. So the mechanical energy is conserved both on the way down and on the way up. That does not include the collision with the floor, so energy before and after the collision is not the same. So PE + KE = constant for both up and down, although the mechanical energy up is less than that on the way down.
 
  • #4
Nathanael said:
Their solution comes from conservation of energy. [itex]mgH[/itex] is set equal to [itex]\frac{1}{2}mv^2[/itex] because the gravitational potential energy is converted to kinetic energy (and vice versa, on the way up).

That kind of makes sense to me, but in the chapter the equation is listed as ΔK= -ΔUgrav. So if 1/2mv2 represents the kinetic energy, wouldn't the equation be 1/2mv2= -mgH?
 
  • #5
fightboy said:
That kind of makes sense to me, but in the chapter the equation is listed as ΔK= -ΔUgrav. So if 1/2mv2 represents the kinetic energy, wouldn't the equation be 1/2mv2= -mgH?

When ΔUgrav is positive, is ΔK positive or negative?

When ΔUgrav is negative, is ΔK positive or negative?


The negative sign basically means this:

"If you increase the gravitational potential energy, the kinetic energy decreases."

Similarly,

"If you decrease the gravitational potential energy, the kinetic energy increases."
 
  • #6
fightboy said:
That kind of makes sense to me, but in the chapter the equation is listed as ΔK= -ΔUgrav. So if 1/2mv2 represents the kinetic energy, wouldn't the equation be 1/2mv2= -mgH?
Gravitational PE is, in general, ##-\frac{GMm}r##. For constant g, that's -gmr. The gain in PE, ΔUgrav, due to a gain Δr in r is therefore -gmΔr.
Choose whether up is positive or negative. E.g., suppose we take up to be positive.
If a ball falls a distance H, what is Δr? Is g positive or negative? So what sign do you get for ΔUgrav?
 
  • #7
Lets consider the ball falling down and use the subscript i (initial) for the top and f (final) for the bottom. Now since the mechanical energy is conserved we have that

Ui + Ki = Uf + Kf

so that

Ui - Uf = Kf - Ki

The change in a quantity, ∇, is the final value minus the intial value so that

-∇U = ∇K
 
  • #8
andrevdh said:
The change in a quantity, ∇
Δ is the usual notation.
 
  • Like
Likes 1 person

1. What is the coefficient of restitution?

The coefficient of restitution, also known as the restitution coefficient or rebound coefficient, is a measure of the ratio of the final to initial relative velocity between two objects after they collide. In simpler terms, it is a value that describes how bouncy or elastic a collision between two objects is.

2. How is the coefficient of restitution calculated?

The coefficient of restitution is calculated by dividing the relative velocity of the objects after collision by the relative velocity before collision. This can be expressed mathematically as e = (vf / vi), where e is the coefficient of restitution, vf is the final relative velocity, and vi is the initial relative velocity.

3. What does a high or low coefficient of restitution indicate?

A high coefficient of restitution (close to 1) typically indicates a more elastic collision, where the objects bounce off each other with minimal loss of kinetic energy. On the other hand, a low coefficient of restitution (close to 0) suggests a more inelastic collision, where the objects stick together and there is a significant loss of kinetic energy.

4. What factors affect the coefficient of restitution?

The coefficient of restitution is influenced by various factors, including the materials and surface properties of the objects involved, the angle and speed of the collision, and the amount of energy lost through things like heat and sound. Additionally, the coefficient of restitution can vary depending on whether the collision is head-on or at an angle.

5. Why is the coefficient of restitution important in physics?

The coefficient of restitution is an important concept in physics because it helps us understand and predict the outcomes of collisions between objects. It is used in various fields, such as sports and engineering, to determine the performance and behavior of objects during impact. It also plays a crucial role in the study of energy conservation and the laws of motion.

Similar threads

  • Introductory Physics Homework Help
Replies
4
Views
941
  • Introductory Physics Homework Help
Replies
2
Views
2K
  • Introductory Physics Homework Help
Replies
34
Views
685
  • Introductory Physics Homework Help
Replies
17
Views
5K
  • Introductory Physics Homework Help
Replies
1
Views
1K
  • Introductory Physics Homework Help
Replies
7
Views
3K
  • Introductory Physics Homework Help
Replies
10
Views
4K
  • Introductory Physics Homework Help
Replies
5
Views
779
  • Introductory Physics Homework Help
Replies
6
Views
2K
Replies
9
Views
5K
Back
Top