Mastercraft cordless drill batteries

In summary, the battery in the newer model of the Mastercraft drill is different than the battery in the older model, and it might not be safe to charge the new batteries using a 12v system.
  • #1
DaveC426913
Gold Member
22,444
6,110
I've got a Mastercraft 15.6A drill. The batteries have died. They don't seem to make this one anymore; the nearest is 14.4A or 18A.

Presuming the socket hasn't changed, anyone know what would happen if I used 14.4A or 18A batteries? I suppose I also have to worry about what might happen if I put them in my charger.

Ideas?
 
Physics news on Phys.org
  • #2
Sure you're not on Volts there Dave old chap?

Might be wrong but most manufacturers Poka-Yoke the battery and socket mouldings so you have to use the right Voltage for your appliance.
 
Last edited:
  • #3
Dave, I'd just find a (Makita?) 15.6V battery. I get mixed up about which is which, but I think that Mastercraft is the house brand made by Makita. It might be B&D, or some other though. You can tell by looking at them. Let's say that it is Makita. The only difference between them and the Mastercraft batteries is that the 'polarising' rib (so you can only insert it one way) is on the opposite side. I'm pretty sure that if you grind that off, you can use the Makita battery in the Mastercraft.
Failing that, I'd think about installing an appropriate resistor in the power circuit and going with the 18V. (In fact, wouldn't your charger only take an 18V battery up to 15.6 or 16 anyhow? Maybe you wouldn't need a resistor.)
 
  • #4
I looked here: http://www.mastercraft.net/
but the site is closed. It does direct you to here: http://www.altocraft.com/

Maybe they can get you what you need. They appear to have some good contact info.

You might also take a look through here:
http://www.batteries.com/power-tools/index.html [Broken]
 
Last edited by a moderator:
  • #5
The cells inside the battery packs are all the same anyway, if you get stuck you can always just buy any old 15.6V battery pack, butcher it, and transplant the new cells into your cacked pack.
 
  • #6
Sorry, Craftsman. And yeah, doh, it's 15.6V.

Hm, transplant the cells. Maybe.

I think first I'll contact the manufacturer.
 
  • #7
DaveC426913 said:
Sorry, Craftsman.
Oh. That does alleviate my surprise that a (supposed) Yank had a Canadian Tire brand drill. I think that Craftsman things are made by B & D.
 
  • #8
brewnog said:
The cells inside the battery packs are all the same anyway, if you get stuck you can always just buy any old 15.6V battery pack, butcher it, and transplant the new cells into your cacked pack.
You can buy individual cells with solder tabs: http://www.smcelectronics.com/batt.htm

Radio Shack used to sell them, but I don't think they do anymore. I'm sure Google will turn up more.
 
Last edited:
  • #9
Danger said:
Oh. That does alleviate my surprise that a (supposed) Yank had a Canadian Tire brand drill. I think that Craftsman things are made by B & D.
I am Canadian. What made you think I wasn't?
 
  • #10
Just that the majority of PFers appear to be Yanks, and I don't recall seeing anything in your posts to indicate otherwise. Sorry for the slur; it was unintentional. :biggrin:
 
  • #11
Are you sure that the new batteries are NiCad's? They're pretty rare these days. More likely, they're NiMH's.
 
  • #12
brewnog said:
The cells inside the battery packs are all the same anyway, if you get stuck you can always just buy any old 15.6V battery pack, butcher it, and transplant the new cells into your cacked pack.

I've heard that's the best way---

sometimes you can pick up new, used, and dead batteries off of ebay, too

______________________________

there's a lot of stuff on the web about it

http://www.google.com/search?hl=en&q=rejuvenating+dead+cordless+batteries&btnG=Google+Search

it seems quite a few links go to someplace trying to sell some 'kit'---I checked it out a couple years ago and the kit bascially is some type of flash jump with 12 volt power source to burn off the whiskers that form in the battery.

here's a good thread:
http://www.sawmillcreek.org/showthread.php?t=10733

http://www.instructables.com/id/Cordless-drill---Improving-the-battery/

good site for a lot of tings:
http://www.instructables.com/home


and here's a company that will re-build them for you:

http://primecell.com/
 
Last edited:
  • #13
Help! Charging 18 v Ni/Cd batteries with 12 volt System

Help! I just bought a new 18 v mastercraft drill. I also have an older model of this 18v mastercraft, bought 3 or 4 yrs. ago. The manual for the older moder warned against charging the batteries through a 12v system as it would likely kill the batteries (both drills take Ni/Cd batteries and my old charger requires a "true sine" 12v/110v inverter... which is too costly.). The manual for the new drill has no such warning...and the Mastercraft Helpline was of no help. I would really like to charge the new batteries at my cottage using our 12v solar system but don't want to be buying new batteries as a result. The new charger seems more sophisticated... it's heavier, has an automatic shut-off, and only takes an hour to charge (vs 5hrs for old charger and no shut-off). Can anyone help me out here?
 

What is a Mastercraft cordless drill battery?

A Mastercraft cordless drill battery is a rechargeable power source designed specifically for use with Mastercraft cordless drills. It provides the necessary energy to power the drill and allows for maximum portability and convenience.

How long does a Mastercraft cordless drill battery last?

The lifespan of a Mastercraft cordless drill battery can vary depending on usage and maintenance. On average, it can last between 2-3 years with proper care and regular use. However, it is recommended to check the manufacturer's guidelines for specific information on the battery's lifespan.

Can I use a third-party battery with my Mastercraft cordless drill?

It is not recommended to use third-party batteries with Mastercraft cordless drills. These batteries may not be compatible and could potentially damage the drill or void its warranty. It is best to use the recommended Mastercraft battery for optimal performance and safety.

How do I properly maintain my Mastercraft cordless drill battery?

To ensure the longevity of your Mastercraft cordless drill battery, it is important to follow these maintenance tips:

  • Charge the battery fully before first use and after each use.
  • Store the battery in a cool, dry place when not in use.
  • Avoid overcharging or leaving the battery on the charger for extended periods.
  • Use the battery regularly to maintain its charge.

What do I do if my Mastercraft cordless drill battery is not holding a charge?

If your Mastercraft cordless drill battery is not holding a charge, it may need to be replaced. Before purchasing a new battery, try fully charging and discharging it a few times to see if that improves its performance. If the problem persists, contact the manufacturer for further assistance.

Similar threads

  • Introductory Physics Homework Help
Replies
3
Views
194
Replies
1
Views
1K
Replies
3
Views
633
Replies
11
Views
1K
  • DIY Projects
Replies
28
Views
2K
  • Electrical Engineering
Replies
10
Views
794
  • DIY Projects
Replies
3
Views
2K
  • Electrical Engineering
Replies
33
Views
2K
  • Electrical Engineering
Replies
7
Views
1K
  • Computing and Technology
Replies
13
Views
2K
Back
Top