Reusable Fuel Ubop Self Contained Transit Drive

In summary, the conversation discusses a theoretical transit drive that utilizes two combustion chambers and exhaust nozzles to propel a spacecraft forward. The fuel used is a theorized new element that provides incremental acceleration, and the structure of the drive is made up of a theorized new super element called superglass. However, it is pointed out that without the fuel exiting the spacecraft, there is no net thrust. The conversation is ultimately deemed too speculative and is not allowed on the forum according to the rules.
  • #1
CrystoshBauer
3
0
This is not a perpetual motion machine; the fusion power plant will run out of nuclear power to provide electricity to power it; and this type of transit drive works in theory by having two combustion chambers positioned parallel to the spacecraft 's width and perpendicular to its length. Each of the two exhaust nozzles are also positioned parallel to the spacecraft 's width and perpendicular to its length. Fuel is pumped into the combustion chambers and goes out the two exhaust nozzles at high velocity, and each fuel exhuast half next travels through a half of the U shaped tunnel until they both push against a panel that pushes against the ship's midship bulkhead pushing the spacecraft forwards. Next, in each panel a hole opens and a combustion chamber & exhaust nozzle at each hole slides into position. Then the exhaust is pushed by compressable radially symmetrical panels through their respective holes into those two exhaust nozzles and into the two combustion chambers located at the ends of the U tunnel (pushing the spacecraft forwards), and finally the exhausts go out of the combustion chambers & exhaust nozzles and through their respective U tunnel halves pushing their panels until they go back into the exhaust nozzles & combustion chambers alocated in the midcurve of the U shaped tunnel cancelling out each other’s opposite and equal reactions, and then the process repeats itself. The fuel is made up of multitudes of theorized systematic new elements in which each element provides an incremental acceleration when it combusts (each latter fuel element is more combustible than the former fuel element). The fuel exhausts don't exit the spacecraft . The structure of the U tunnel, combustion chambers, exhaust nozzles, etc. are made up of a theorized new super element I call superglass (the superglass structure negates the necessity of magnetic fields to contain the exhaust particles to keep them from melting spacecraft structure). Finally I designed a transit drive that reuses its fuel practically infinitely in translational movements.

midship bulkhead
__________
|o|____|o|
X******X
|_|___|__|
|*|***|**|
\_|XooX|_/

Each X is a combustion chamber & fuel exhuast nozzle. Each o is a compressable radially symmetrical panel.
 
Last edited:
Physics news on Phys.org
  • #2
Without the fuel exiting the vehicle it will not produce thrust. In your first U shape tunnel, the fuel exits the nozzle, applying a force on the ship backwards, but impacts the plate, cancelling out the force. I've tried to follow your design past this point, but I can't follow your wall of text very well and the description is very hard to follow, as is your diagram. Anyways, like I said, if the fuel isn't leaving the vehicle then it isn't producing net thrust. It simply cancels itself at every change in direction and when it impacts the plates.

And let's not discuss your made up fuel and superglass.
 
  • #3
CrystoshBauer said:
This is not a perpetual motion machine; the fusion power plant will run out of nuclear power to provide electricity to power it; and this type of transit drive works in theory by having two combustion chambers positioned parallel to the spacecraft 's width and perpendicular to its length. Each of the two exhaust nozzles are also positioned parallel to the spacecraft 's width and perpendicular to its length. Fuel is pumped into the combustion chambers and goes out the two exhaust nozzles at high velocity, and each fuel exhuast half next travels through a half of the U shaped tunnel until they both push against a panel that pushes against the ship's midship bulkhead pushing the spacecraft forwards. Next, in each panel a hole opens and a combustion chamber & exhaust nozzle at each hole slides into position. Then the exhaust is pushed by compressable radially symmetrical panels through their respective holes into those two exhaust nozzles and into the two combustion chambers located at the ends of the U tunnel (pushing the spacecraft forwards), and finally the exhausts go out of the combustion chambers & exhaust nozzles and through their respective U tunnel halves pushing their panels until they go back into the exhaust nozzles & combustion chambers alocated in the midcurve of the U shaped tunnel cancelling out each other’s opposite and equal reactions, and then the process repeats itself. The fuel is made up of multitudes of theorized systematic new elements in which each element provides an incremental acceleration when it combusts (each latter fuel element is more combustible than the former fuel element). The fuel exhausts don't exit the spacecraft . The structure of the U tunnel, combustion chambers, exhaust nozzles, etc. are made up of a theorized new super element I call superglass (the superglass structure negates the necessity of magnetic fields to contain the exhaust particles to keep them from melting spacecraft structure). Finally I designed a transit drive that reuses its fuel practically infinitely in translational movements.

midship bulkhead
__________
|o|____|o|
X******X
|_|___|__|
|*|***|**|
\_|XooX|_/

Each X is a combustion chamber & fuel exhuast nozzle. Each o is a compressable radially symmetrical panel.

As pointed out, you get no thrust if the accelerated fuel does not exit the craft -- you can't "recover" it and get a net thrust.

Also, personal theories and overly speculative ideas are not permitted at the PF, per the Rules link at the top of the page. Thread is locked.
 

1. What is the purpose of the Reusable Fuel Ubop Self Contained Transit Drive?

The Reusable Fuel Ubop Self Contained Transit Drive is designed to provide a sustainable and efficient means of transportation, using a reusable fuel source.

2. How does the Reusable Fuel Ubop Self Contained Transit Drive work?

The Reusable Fuel Ubop Self Contained Transit Drive utilizes a unique technology that converts waste materials into a reusable fuel source, which is then used to power the vehicle.

3. What makes the Reusable Fuel Ubop Self Contained Transit Drive more sustainable than traditional forms of transportation?

The Reusable Fuel Ubop Self Contained Transit Drive reduces the reliance on non-renewable resources, as it utilizes waste materials as fuel. This decreases carbon emissions and reduces the overall environmental impact of transportation.

4. How efficient is the Reusable Fuel Ubop Self Contained Transit Drive?

The Reusable Fuel Ubop Self Contained Transit Drive is designed to be highly efficient, as it utilizes waste materials as fuel and has a closed-loop system that minimizes energy loss.

5. Is the Reusable Fuel Ubop Self Contained Transit Drive suitable for all types of transportation?

The Reusable Fuel Ubop Self Contained Transit Drive is versatile and can be used for various forms of transportation, including cars, buses, and trains. It can also be adapted for use in other industries, such as shipping and aviation.

Similar threads

  • Classical Physics
Replies
5
Views
2K
  • Classical Physics
Replies
5
Views
2K
Replies
16
Views
2K
Replies
4
Views
30K
Replies
2
Views
6K
  • Other Physics Topics
Replies
0
Views
729
  • General Discussion
Replies
4
Views
7K
Replies
2
Views
3K
  • Nuclear Engineering
Replies
2
Views
4K
  • General Discussion
Replies
31
Views
5K
Back
Top