Impedance of voltage source, and tank ckt

In summary, the impedance of a voltage source is the effective resistance it presents to an electrical circuit. It can be calculated using Ohm's Law or complex numbers. A tank circuit is an electrical circuit consisting of an inductor and capacitor in parallel, often used in RF applications. Resonance in a tank circuit occurs when the inductive and capacitive reactances are equal, resulting in sustained oscillations. The impedance of a tank circuit can be adjusted by changing the values of the inductor and capacitor, as well as the frequency of the input voltage.
  • #1
fleem
440
0
Can someone please tell me whether the following statements are wrong or right? this is not homework:

1. Voltage sources, like batteries, have a low impedance (ideally zero)

2. A good car battery's impedance (even with alternating current going through the battery) is typically far less than a few ohms.

3. A tank circuit is driven in parallel and resonates in a series loop.
 
Engineering news on Phys.org
  • #2
1. True.
2. True.
3. False.
 
  • #3


1. This statement is generally correct. Voltage sources, such as batteries, are designed to have a very low internal impedance in order to deliver a consistent voltage to the circuit they are powering. However, it is not correct to say that the ideal impedance of a voltage source is zero. In reality, all voltage sources have some internal resistance, although it may be very small.

2. This statement is also generally correct. A car battery is designed to have a low internal impedance, typically less than a few ohms, in order to provide a high current output. This is important for starting the car's engine, which requires a large surge of current.

3. This statement is incorrect. A tank circuit is driven in series and resonates in a parallel loop. In a tank circuit, the inductor and capacitor are connected in series and the circuit is driven by a voltage source. The output voltage is taken across the capacitor, which is in parallel with the inductor. This allows the circuit to resonate at a specific frequency, determined by the values of the inductor and capacitor.
 

What is the impedance of a voltage source?

The impedance of a voltage source refers to the effective resistance that the source presents to an electrical circuit. It is a combination of both the internal resistance of the source and the external load it is connected to.

How is the impedance of a voltage source calculated?

The impedance of a voltage source can be calculated using Ohm's Law, which states that impedance is equal to the voltage divided by the current. It can also be calculated using complex numbers and the concept of phasors in AC circuits.

What is a tank circuit?

A tank circuit is a type of electrical circuit that consists of a combination of an inductor and a capacitor connected in parallel. It is used to generate and sustain oscillations at a specific frequency, and is often used in radio frequency (RF) applications.

What is resonance in a tank circuit?

Resonance in a tank circuit occurs when the inductive and capacitive reactances are equal, resulting in a high impedance and a large amount of energy being stored in the circuit. This leads to sustained oscillations at the resonant frequency of the circuit.

How can the impedance of a tank circuit be adjusted?

The impedance of a tank circuit can be adjusted by changing the values of the inductor and capacitor, as well as the frequency of the input voltage. By adjusting these parameters, the resonant frequency of the circuit can be changed, thereby altering the impedance of the circuit.

Similar threads

  • Electrical Engineering
Replies
11
Views
1K
  • Electrical Engineering
Replies
2
Views
1K
Replies
47
Views
3K
Replies
2
Views
1K
Replies
3
Views
543
Replies
12
Views
1K
  • Introductory Physics Homework Help
Replies
3
Views
531
Replies
10
Views
1K
  • Electrical Engineering
2
Replies
51
Views
4K
  • Engineering and Comp Sci Homework Help
Replies
2
Views
761
Back
Top