What is the required mass of isotopes for a 200 Ci activity in cancer treatment?

I guess should round to 0.8189gm?So I should get an answer of 0.8189...gm, which I guess should round to 0.8189gm?In summary, the mass of 19879Au required to give an activity of 200 Ci is approximately 0.8189 grams. This can be calculated using the equations for activity and decay constant, and incorporating Avogadro's number and the molar mass of 19879Au.
  • #1
FlipStyle1308
267
0

Homework Statement



One of the many isotopes used in cancer treatment is 19879Au, with a half-life of 2.70 d. Determine the mass of this isotope that is required to give an activity of 200 Ci.

Homework Equations



200Ci x 3.7x10^10 decays/s = 7.4 x 10^12 decays/s
T1/2 = ln2/lambda = 0.693/lambda

The Attempt at a Solution



I looked through my book in the section on half-life and radioactive dating, but could not find an equation(s) that would seem useful for this problem, since it involves mass (which is introduced later on in the chapter). The only equation I found relevant is the one I listed in (b). Any help would be appreciated. Thanks!
 
Last edited:
Physics news on Phys.org
  • #2
The fundamental principle underlying exponential decay is that activity is proportional to the number of atoms of a radioactive substance available to decay. Surely you have an equation of the form

A = A_o*exp{-kt}

and one of the form

A = k'N where N is the number of atoms in the sample.

How are k and k' related to half life?
 
  • #3
OlderDan said:
The fundamental principle underlying exponential decay is that activity is proportional to the number of atoms of a radioactive substance available to decay. Surely you have an equation of the form

A = A_o*exp{-kt}

and one of the form

A = k'N where N is the number of atoms in the sample.

How are k and k' related to half life?

We don't have those equations in this book, but I see R=R_o_e^(-lambdat), and R=lambdaN. I'm assuming that your A is the same as my R, and your k is my lambda. If so, then I can say that lambda and lambda' is the decay constant, which gives the rate of decay in half-life.

I did some work while waiting for a response, so check if this is correct:

R=R_o_e^(-lambdat)
7.4x10^12 decays/s = (3.7x10^10 decays/s)e^(-lambda233280s)
200 = e^(-lambda233280s)
ln200 = -lambda233280s
lambda = 2.2712x10^-5 s^-1

R = lambdaN
7.4x10^12 decays/s = (2.2712x10^-5 s^-1)N
N = 3.2582x10^17 nuclei

Please let me know if I have done the correct steps up to this point. I do not know what to do next. Thanks.
 
Last edited:
  • #4
The first equation you list is the equation for activity of a sample given some initial activity, and is commonly called the decay equation. To find the decay constant (lambda), you use the second equation since you already know the half life. The equation you don't have listed is that Activity of any given sample is the number of atoms in the sample times the decay constant. Since you now have the number of atoms, you can use Avogadro's number and the gram atomic weight to determine the mass.
Your lambda in this case is incorrect because lambda = ln2/half-life = .693/2.70 days = 0.000002971 per second. The way you set up your equation, you wrote that 200 curies = 1 curie*e(-lambda*half-life).
 
Last edited:
  • #5
FlipStyle1308 said:
We don't have those equations in this book, but I see R=R_o_e^(-lambdat), and R=lambdaN. I'm assuming that your A is the same as my R, and your k is my lambda. If so, then I can say that lambda and lambda' is the decay constant, which gives the rate of decay in half-life.

I did some work while waiting for a response, so check if this is correct:

R=R_o_e^(-lambdat)
7.4x10^12 decays/s = (3.7x10^10 decays/s)e^(-lambda233280s)
200 = e^(-lambda233280s)
ln200 = -lambda233280s
lambda = 2.2712x10^-5 s^-1

R = lambdaN
7.4x10^12 decays/s = (2.2712x10^-5 s^-1)N
N = 3.2582x10^17 nuclei

Please let me know if I have done the correct steps up to this point. I do not know what to do next. Thanks.

You are correct that your R is my A, and my constant is your λ. The 200 Ci activity has nothing to do with the calculation of λ from the given half life. daveb is correct on that point. But you do have the equation he says is missing in your quote above.
 
  • #6
OlderDan said:
You are correct that your R is my A, and my constant is your λ. The 200 Ci activity has nothing to do with the calculation of λ from the given half life. daveb is correct on that point. But you do have the equation he says is missing in your quote above.

Okay, so here's my new work that I just did:

λ = ln2/T1/2 = 0.693/233280s = 2.9707x10^-6 decays/s
R = λN
200Ci x 3.7x10^10decays/s/Ci = (2.9707x10^-6decays/s)N
N = 2.491x10^18
(2.491x10^18)(6.022x10^23molecules/mol) = 1.5x10^42

I did not quite understand what you meant when I incorporate the gram atomic weight into this because it is not given. (The atomic mass in the book's appendix only lists that for 197_79_Au instead of 198_79_Au, which I need.
 
  • #7
FlipStyle1308 said:
Okay, so here's my new work that I just did:

λ = ln2/T1/2 = 0.693/233280s = 2.9707x10^-6 decays/s
R = λN
200Ci x 3.7x10^10decays/s/Ci = (2.9707x10^-6decays/s)N
N = 2.491x10^18
(2.491x10^18)(6.022x10^23molecules/mol) = 1.5x10^42

I did not quite understand what you meant when I incorporate the gram atomic weight into this because it is not given. (The atomic mass in the book's appendix only lists that for 197_79_Au instead of 198_79_Au, which I need.

http://chemlab.pc.maricopa.edu/periodic/Au.html

197.96822
 
Last edited by a moderator:
  • #8
OlderDan said:

Thanks. But I still don't know how to plug this into whatever equation I'm supposed to be using. Or is it...

(2.491x10^18)(6.022x10^23molecules/mol)(197.96822) = 2.9697 x 10^44?
 
Last edited by a moderator:
  • #9
FlipStyle1308 said:
Thanks. But I still don't know how to plug this into whatever equation I'm supposed to be using. Or is it...

(2.491x10^18)(6.022x10^23molecules/mol)(197.96822) = 2.9697 x 10^44?

Your N should be the number of molecules, so you should be dividing by Avegadro's number to find the number of moles. The 197.96822 is molar mass, or grams per mole, so I believe you are looking for

(2.491x10^18molecules)(197.96822gm/mol)/(6.022x10^23molecules/mol)
 
  • #10
OlderDan said:
Your N should be the number of molecules, so you should be dividing by Avegadro's number to find the number of moles. The 197.96822 is molar mass, or grams per mole, so I believe you are looking for

(2.491x10^18molecules)(197.96822gm/mol)/(6.022x10^23molecules/mol)

So I should get an answer of 0.8189 mg?
 
  • #11
FlipStyle1308 said:
So I should get an answer of 0.8189 mg?

Again you want somebody to multiply for you?
 

What is an isotope?

An isotope is a form of an element that has the same number of protons but a different number of neutrons, resulting in a different atomic mass.

How do you determine the mass of an isotope?

The mass of an isotope can be determined using a mass spectrometer, which separates the isotopes based on their mass-to-charge ratio and measures the relative abundance of each isotope. The average mass of all the isotopes present in a sample is then calculated.

What is the unit of measurement for the mass of an isotope?

The unit of measurement for the mass of an isotope is atomic mass unit (amu), also known as dalton (Da). This unit is equal to 1/12th of the mass of a carbon-12 atom.

Can the mass of an isotope vary?

Yes, the mass of an isotope can vary depending on the number of neutrons present. This is why elements can have different isotopes with varying atomic masses.

Why is it important to determine the mass of an isotope?

Determining the mass of an isotope is important for understanding the composition and behavior of elements. It can also help identify and distinguish between different isotopes of the same element, which can have different properties and uses.

Similar threads

  • Advanced Physics Homework Help
Replies
11
Views
2K
  • Advanced Physics Homework Help
Replies
2
Views
2K
  • Introductory Physics Homework Help
Replies
5
Views
2K
  • Advanced Physics Homework Help
Replies
4
Views
3K
  • Introductory Physics Homework Help
Replies
5
Views
3K
  • Introductory Physics Homework Help
Replies
16
Views
2K
  • Engineering and Comp Sci Homework Help
Replies
1
Views
906
  • Introductory Physics Homework Help
Replies
8
Views
2K
  • Introductory Physics Homework Help
Replies
4
Views
7K
  • Introductory Physics Homework Help
Replies
16
Views
2K
Back
Top