Can Plutonium from a Reactor be Reused?

  • Thread starter renigade666
  • Start date
  • Tags
    Reactor
In summary: So the third level of plutonium recycling is fast reactors. And even in those reactors, you cannot use plutonium as fuel forever, because it will eventually reach the end of its life. But you can continue to irradiate it, and eventually turn it into MOX fuel, or other types of reactor fuel.
  • #1
renigade666
25
0
The plutonium that is produced in a nuclear reactor, is it still able to be re-used in another reactor?

If it can be re-used, does it need another special type of reactor to be effective?

Are they doing this and I am just unaware of it?:confused:


Thanks!
 
Engineering news on Phys.org
  • #2
Plutonium and uranium are recycled and reprocessed into new fuel. The new fuel containing Pu and U in oxide form is known as MOX (mixed oxide), and usually has 6-7% Pu blended into the U in the form of (Pu,U)O2. The recycled U fuel is ERU (enriched recycled U) or ERPU (enriched reprocessed U). The French have the biggest program, and the Germans the next biggest, then Belgium, UK, Swiss. Japan has a small program. Russian and China also have programs.
 
  • #3
renigade666 said:
The plutonium that is produced in a nuclear reactor, is it still able to be re-used in another reactor?

If it can be re-used, does it need another special type of reactor to be effective?

Are they doing this and I am just unaware of it?:confused:


Thanks!

There are 3 levels of re-use of plutonium. One is, as Astronuc pointed out, in current LWR, by making MOX fuel (a mixture of enriched uranium and plutonium). But actually, MOX fuel in current LWR are a kind of a "bricolage", because current LWR weren't designed for the use of plutonium. Plutonium is in fact a great fuel, in some respects even better than enriched U, but some parameters are different. For instance, in the isotopic mix that comes out of a LWR after reprocessing, there is a relatively high quantity of even-A plutonium which is not fissile in a thermal spectrum, but absorbs a lot of neutrons. On the other hand, the effective nu (number of neutrons per fission event) is higher in odd-A plutonium than in uranium. All this means that the neutron transport properties in plutonium are different than in uranium, and current LWR weren't designed for that. They can accept MOX in limited amounts, but the majority fuel must remain enriched uranium.

The second level of re-use of plutonium is by designing a LWR especially on purpose for MOX fuel. The EPR reactor which is now being build in France and Finland is of that design. Theoretically, it can work on pure MOX fuel. I don't know if they will really use it that way.

However, both uses of plutonium recycling have a serious problem, because they are in a thermal spectrum. Plutonium was produced in a thermal spectrum from uranium, and different isotopes are produced one from another by neutron absorption in plutonium. As such, by continuing irradiation in a thermal spectrum, the A number of the plutonium isotopes rises continuously, until Pu-243 is reached, which decays in Am-243. And that's a nuisance. So you can only use plutonium in a limited way in a thermal spectrum: in the end you will have so many even-number A-plutonium, and so much Am-243, that the material becomes unusable as fuel in a thermal reactor, no matter its design.

The REAL use of plutonium is in a fast reactor. There, it is a superior fuel to uranium (because of its higher neutron yield). The heart of a breeder reactor is necessarily made of plutonium, and in a fast spectrum, even-A plutonium is also fissionable, so there is actually no production of high-A plutonium (as it is used as fuel) ; even Am-243 can "burn" in a fast reactor.
 

1. Can plutonium from a reactor be reused?

Yes, plutonium from a reactor can be reused as fuel in other nuclear reactors.

2. How is plutonium from a reactor reused?

Plutonium from a reactor can be extracted, purified, and fabricated into new fuel rods for use in other reactors.

3. What are the benefits of reusing plutonium from a reactor?

Reusing plutonium from a reactor reduces the amount of nuclear waste produced and can help to meet energy demands by providing a source of fuel for nuclear reactors.

4. Are there any safety concerns with reusing plutonium from a reactor?

Yes, there are potential safety concerns with handling and transporting plutonium. However, these risks can be managed through strict regulations and safety protocols.

5. Are there any limitations to reusing plutonium from a reactor?

The main limitation is the cost and complexity of extracting and purifying the plutonium. Additionally, not all types of reactors are able to use plutonium as fuel, so it may only be feasible in certain reactor designs.

Similar threads

  • Nuclear Engineering
Replies
19
Views
2K
  • Nuclear Engineering
Replies
4
Views
1K
Replies
7
Views
1K
  • Nuclear Engineering
Replies
5
Views
1K
Replies
5
Views
860
Replies
5
Views
689
Replies
13
Views
2K
Replies
11
Views
2K
  • Nuclear Engineering
Replies
31
Views
2K
Replies
2
Views
1K
Back
Top