Are power stations wasting energy during Earth Hour?

In summary, the Earth Hour movement is an effort to conserve energy by turning off electrical appliances for an hour. When the power station that generates the electricity is generating less power, the generators must be turned faster to maintain the same RPM. If the load at the power station is high, the power station will apply more accellerator pressure to the generators to speed up their rotation.
  • #1
chebyshevF
30
0
Has everyone heard about the Earth Hour movement? Where you're encouraged to turn off anything that uses electricity in your home, for an hour, to conserve energy.

What I'm wonedering is: let's say that a large group of people depend on a specific power station, so when they all, or the majority, turn off all electrical appliances, what happens with the power that is generated at the power station? I'm guessing they still continue to generate electricity, and isn't it true that this power cannot be stored, so would it be right to say that the power stations are generating electricity that is just being wasted? Since for that whole hour, there wouldn't be as much of a demand, therefore the power station is pointlessly generating electricity that nobody is using for the time being?

I'm not sure if I make sense, but basically: is the power that is generated at the power station, being wasted owing to the fact that it isn't being used during the hour period?
 
Engineering news on Phys.org
  • #2
The generators at the power station become easier to turn if the load is reduced.

So, the power plant which turns the generators uses less fuel to rotate the generators at the right speed.

No unwanted power is produced and less fuel is used.

As long as the power station keeps producing the right voltage, the current drawn just depends on which appliances are switched on or off.
 
  • #3
So the rate at which the generators are being turned depends on how high the demand is at the load?

But how does the power station know when the demand is high or low? Wouldn't it take some amount of time for the power station to be given some form of feed back by the load, that more power is needed, therefore they need fuel?
 
  • #4
chebyshevF said:
So the rate at which the generators are being turned depends on how high the demand is at the load?

But how does the power station know when the demand is high or low? Wouldn't it take some amount of time for the power station to be given some form of feed back by the load, that more power is needed, therefore they need fuel?

The speed of the generator rotation determines the frequency of the output. This may be 50 or 60 Hz but it must remain constant regardless of load.

If this starts to decrease, automatic sensors detect the difference and apply slightly more accellerator pressure to bring the speed back to normal again.
If everyone in a whole city turned off the power at once, the power station might have a few seconds of rapid adjustment while the power from the power plant was reduced.

These are very large heavy machines, so minor changes in current drain have little effect on the speed of their rotation.

The current drawn is also measured from second to second and the mechanical power input is adjusted automatically to maintain constant RPM from the generators.
 
  • #5
So if you have a generator with practically zero load and another one at near max load, both turning at the same RPM, then the one with zero load will use less fuel?
 
  • #6
Yes. It's like a couple riding a tandem. The one at the back can just pedal lightly and the guy in front would just think the hill was steeper than it looked.

Nuclear Power Stations are more of a problem because (see recent news) they take a long time to shut down completely so they produce no steam.
 

1. What is Earth Hour and why is it important?

Earth Hour is a global event organized by the World Wildlife Fund to raise awareness about the need for action on climate change. It involves switching off all non-essential lights for one hour to symbolically show our commitment to reducing carbon emissions and protecting the planet.

2. How do power stations contribute to climate change during Earth Hour?

Power stations use fossil fuels such as coal, oil, and gas to generate electricity. These fuels emit large amounts of carbon dioxide, a greenhouse gas that contributes to climate change. During Earth Hour, when people turn off their lights, power stations have to compensate by producing more electricity, which means emitting more carbon dioxide.

3. Can Earth Hour really make a difference in reducing carbon emissions?

While one hour of reduced energy consumption may not have a significant impact on carbon emissions, Earth Hour is more about raising awareness and promoting long-term behavior changes. By participating in Earth Hour, individuals and communities can start to think about their energy consumption and make small changes that can add up to a bigger impact over time.

4. Are there any benefits to participating in Earth Hour?

Besides the symbolic message of taking action on climate change, participating in Earth Hour can also have practical benefits. By turning off non-essential lights and electronics, individuals and communities can save on electricity bills and reduce their overall energy consumption.

5. How can we make a bigger impact beyond Earth Hour when it comes to power station emissions?

Reducing our reliance on fossil fuels and transitioning to renewable energy sources is key to reducing carbon emissions from power stations. This can be done through individual actions such as using energy-efficient appliances and supporting renewable energy initiatives, as well as advocating for government and industry leaders to prioritize and invest in clean energy solutions.

Similar threads

  • Electrical Engineering
Replies
5
Views
2K
Replies
13
Views
4K
Replies
17
Views
2K
Replies
35
Views
5K
Replies
6
Views
2K
  • Electrical Engineering
Replies
4
Views
1K
  • Electrical Engineering
Replies
24
Views
2K
Replies
8
Views
861
  • Electrical Engineering
Replies
2
Views
1K
  • Electrical Engineering
2
Replies
58
Views
6K
Back
Top