How Do You Calculate Additional Wavelengths in an Emission Spectrum?

In summary, the substance has three lines in its emission spectrum with wavelengths 517, 781, and 1.534 nm, all resulting from transitions to the ground state.
  • #1
crimsondarkn
13
0
I solved a, but I couldn't figure out b... I've tried different combinations but nothing turned out correctly...

Homework Statement



The emission spectrum of an unknown substance contains lines with the wavelengths 172 nm, 194 nm , and 258 nm, all resulting from transitions to the ground state.

a) Calculate the energies of the first three excited states.

b) Calculate the wavelengths of three other lines in the substance's emission spectrum.

Homework Equations



E = hc/ wavelength

wavelength 1 = 2.58x10^-7 m
wavelength 2 = 1.94x10^-7 m
wavelength 3 = 1.72x10^-7 m

The Attempt at a Solution



a) First Energy level : E = ((6.63x10^-34)(3.00x10^8)) / (2.58x10^-7) = 7.71 x10^-19 J

Convert to eV: 7.71x10^-19 J / 1.6x10^-19 J/eV = 4.82 eV

Second Energy level : E=((6.63x10^-34)(3.00x10^8)) / (1.94x10^-7) = 1.025x10^-18 J

Concert to eV: 1.025x10^-18 J / 1.6x10^-19 J/eV = 6.41 eV

Third Energy level: E = ((6.63x10^-34)(3.00x10^8)) / (1.72x10^-7) = 1.1564x10^-18 J

Concert to eV: 1.1564x10^-18 J / 1.6x10^-19 = 7.22 eV

b) lamda = hc/Ef-Ei

I know it has something to do with subtracting with the 3 energy levels from above to figure out the three new lamdas but that didn't turn out properly.

the answers are: 518nm,782m, and 152 nm.

If anyone could point me to the right direction, I'd be greatly appreciated.
 
Physics news on Phys.org
  • #2
You've found the energies of the first three excited states: n = 2, 3, & 4. The wavelengths you were given correspond to transitions to the groundstate: from n=2 to n=1, n=3 to n=1, etc.

But transitions do not always have to be to the ground state; they can be from any higher level to any lower level. Using those 3 excited states, what possible transitions exist?
 
  • #4
You have three different energy levels each going to the ground state in the first problem, as correctly solved by you. The second part asks for three wavelengths: the wavelengths of photons emitted when the third excited state goes to the second and first excited states, and when the second excited state goes to the first excite state.
 
  • #5
Okay, I've done all the calculations but one doesn't give me the right answer... I'm not sure if its the book's error so if u guys could check please..

Three possible transactions: (7.22-4.82) , (7.22-6.41), (6.41-4.82)

wavelength 1 = hc/Ef-Ei = (6.63x10^-34)(3.00x10^8) / (7.22-4.82)(1.6x10^-19) = 5.17x10^-7 m = 517 nm

wavelength 2 = hc/Ef-Ei = (6.63x10^-34)(3.00x10^8) / (6.41-4.82)(1.6x10^-19) = 7.81x10^-7 m = 781 nm

wavelength 3 = hc/Ef-Ei = (6.63x10^-34)(3.00x10^8) / (7.22-6.41)(1.6x10^-19) = 1.534x10^-6 m = (1534 nm?)

Either the book missed the last digit or my answer is wrong since 152 nm is shown in the book for wavelength 3. and yeah..my other answers are off about 1 but that's pretty close ,since we are dealing with such small numbers after all... Thanks again.
 
  • #6
The book must be wrong since its answer (152 nm) is the shortest wavelength and would have a higher energy than any of the other emissions (shorter wavelength = higher energy).
 

1. What is an emission spectrum?

An emission spectrum is a unique pattern of light emitted by an atom or molecule when it is excited by energy, such as heat or electricity. This spectrum is characterized by distinct lines or bands of light at specific wavelengths, which can be used to identify the elements or compounds present in a sample.

2. How is an emission spectrum created?

An emission spectrum is created when an atom or molecule absorbs energy and its electrons move to higher energy levels. As these electrons return to their original energy levels, they release energy in the form of light. The resulting spectrum is unique to each element or compound and can be analyzed to identify the composition of a sample.

3. What is the difference between an emission spectrum and an absorption spectrum?

An emission spectrum shows the wavelengths of light that are emitted by an atom or molecule, while an absorption spectrum shows the wavelengths of light that are absorbed by a sample. Absorption and emission spectra are complementary and can be used together to identify the elements or compounds present in a sample.

4. What are some practical applications of emission spectra?

Emission spectra have many practical applications in fields such as astronomy, chemistry, and environmental science. They are used to identify the chemical composition of stars and other celestial objects, analyze the composition of gases in the Earth's atmosphere, and detect the presence of pollutants in the environment.

5. Can emission spectra be used to determine the temperature of a sample?

Yes, the intensity and width of the lines in an emission spectrum can be used to determine the temperature of a sample. This is known as thermoluminescence and is often used in archaeology and geology to date objects or materials based on their emission spectra.

Similar threads

  • Introductory Physics Homework Help
Replies
2
Views
1K
  • Introductory Physics Homework Help
Replies
1
Views
964
Replies
1
Views
944
  • Introductory Physics Homework Help
Replies
12
Views
2K
  • Introductory Physics Homework Help
Replies
2
Views
1K
  • Introductory Physics Homework Help
Replies
4
Views
4K
  • Introductory Physics Homework Help
Replies
1
Views
2K
  • Introductory Physics Homework Help
Replies
1
Views
5K
  • Introductory Physics Homework Help
Replies
11
Views
2K
  • Introductory Physics Homework Help
Replies
2
Views
10K
Back
Top