Liquid-Vapour Interface: Adiabatic Expansion

In summary, we discussed how to express dL/dT, as well as the relationship L = L0 + ΔCT for an ideal gas. We also explored the condition for adiabatic expansion when some liquid condenses out and showed that the gradient must be less than zero for a cooling effect to occur. Finally, we found that the condition can be expressed as C_{P,liq} + T\frac{d}{dT}(\frac{L}{T}) = C_{P,vap} - \frac{L}{T_{vap}} and that the gradient can be calculated as (\frac{\partial P}{\partial T})_S = C_{P,vap} - \frac{L}{T
  • #1
unscientific
1,734
13

Homework Statement



2hgxzl4.png


Part(a): Show dL/dT can be expressed as:
Part(b): Show L = L0 + ΔCT for an indeal gas
Part(c): Show the following condition holds for an adiabatic expansion, when some liquid condenses out.

Homework Equations





The Attempt at a Solution



Finished parts (a) and (b).

Part (c)

Starting:
[tex]\frac{d}{dT} = \left(\frac{\partial}{\partial T}\right)_P + \left(\frac{dp}{dT}\right)\left(\frac{\partial}{\partial p}\right)_T[/tex]

[tex]= \frac{d}{dT}(\frac{L}{T}) = (\frac{\partial \Delta S}{\partial T})_P + (\frac{dP}{dT})(\frac{\partial \Delta S}{\partial P})_T [/tex]

Where ##\Delta_S = S_v - S_l## and using maxwell relation from ##dG = -sdT + VdP##:

[tex]= \frac{\Delta C_p}{T} - (\frac{dp}{dT})\left(\frac{\partial}{\partial T}(V_v - V_l)\right)_P[/tex]

Using ideal gas equation ##PV = RT## and Clausius-Clapeyron: ##\frac{dP}{dT} = \frac{L}{TV_v} = \frac{LP}{RT^2}##:

[tex]= \frac{\Delta C_p}{T} - (\frac{R}{P})(\frac{LP}{RT^2})[/tex]

[tex]= \frac{\Delta C_P}{T} - \frac{L}{T^2}[/tex]

Therefore:

[tex] C_{P,liq} + T\frac{d}{dT}(\frac{L}{T}) = C_{P,vap} - \frac{L}{T_{vap}}[/tex]

Condition for condensation: ##(\frac{\partial P}{\partial T})_S < 0 ## (Gradient must be less than zero for cooling effect).

Now what remains is to show that ##(\frac{\partial P}{\partial T})_S = C_{P,vap} - \frac{L}{T_{vap}}##
 
Physics news on Phys.org
  • #2
bumpp
 

What is a liquid-vapour interface?

A liquid-vapour interface is the boundary between a liquid and its vapour phase. It is where the liquid and vapour phases coexist and interact with each other.

What is adiabatic expansion?

Adiabatic expansion is a process in which a gas expands without any transfer of heat or matter with its surroundings. This means that the system is thermally isolated and the internal energy of the gas remains constant.

How does adiabatic expansion affect the liquid-vapour interface?

During adiabatic expansion, the gas molecules move further apart from each other, creating a decrease in pressure. This decrease in pressure can cause the liquid-vapour interface to shift, as the vapour phase expands and the liquid phase contracts.

What factors can influence the adiabatic expansion of a liquid-vapour interface?

The adiabatic expansion of a liquid-vapour interface can be influenced by factors such as the initial pressure, volume, and temperature of the system. The type of gas and the presence of other substances can also play a role.

What are some real-world applications of studying the liquid-vapour interface and adiabatic expansion?

Studying the liquid-vapour interface and adiabatic expansion is important in various fields, such as thermodynamics, chemical engineering, and atmospheric science. It can help us understand and predict the behavior of gases and liquids in different conditions, and can be applied in technologies such as refrigeration, power generation, and weather forecasting.

Similar threads

Replies
2
Views
956
  • Advanced Physics Homework Help
Replies
4
Views
1K
  • Advanced Physics Homework Help
Replies
4
Views
1K
  • Advanced Physics Homework Help
Replies
1
Views
2K
  • Advanced Physics Homework Help
Replies
5
Views
945
Replies
27
Views
2K
Replies
1
Views
611
  • Advanced Physics Homework Help
Replies
5
Views
996
  • Advanced Physics Homework Help
Replies
2
Views
1K
  • Advanced Physics Homework Help
Replies
9
Views
2K
Back
Top