Capacitor Series Circuit: Deriving Cs Relationship

  • Thread starter maulucci
  • Start date
  • Tags
    Capacitor
In summary, to derive the relationship for Cs for a two capacitor series circuit with a resistor, you can start by showing that the same charge separation q is present across each capacitor. Using the equation q = C*V, you can then show that the voltage across Cs is equal to the sum of the potential differences across each capacitor, leading to the equation 1/Cs = 1/C1 + 1/C2. From this, it can be concluded that Cs = C1 + C2, assuming that the voltage across each capacitor is equal.
  • #1
maulucci
9
0

Homework Statement


Derive a relationship for Cs for a two capacitor series circuit with a resistor. Start by showing that the same charge separation q is present across the capacitor and each of the capacitors in series and that the voltage across Cs is equal to the sum of the potential differences across each capacitor.


Homework Equations



1/Cs=(1/C1)+(1/C2)

The Attempt at a Solution



not sure how to approach this
 
Physics news on Phys.org
  • #2
If they are all in series what does that say about the current?

What is the definition of current?
 
  • #3
I tried to work it out and i was wondering if this was the correct way to show wht the question is asking for
q1=C1V and q2=C2V
q=q1+q2=(C1+C2)V
CsV=q=(C1+C2)V
Cs=C1+C2
 
  • #4
maulucci said:
q1=C1V and q2=C2V
q=q1+q2=(C1+C2)V
CsV=q=(C1+C2)V
Cs=C1+C2
This would apply to parallel capacitors, but not to capacitors in series.

The approach CWatters suggested gives you the correct equations for the charge.
 
  • #5
maulucci said:
I tried to work it out and i was wondering if this was the correct way to show wht the question is asking for
q1=C1V and q2=C2V
q=q1+q2=(C1+C2)V <----
CsV=q=(C1+C2)V
Cs=C1+C2

It is a series circuit, and as the problem states, "...the same charge separation q is present across the capacitor and each of the capacitors". But writing q = q1 + q2 not only assumes that the charges are different, but that the current can be different in different components of a series circuit!

First you should argue why the charge separation should be the same on both capacitors. Then you can use that fact and the q = C*V relationship to work out the rest.

{Note: If you happen to have a knowledge of calculus you could write the KVL equation for the circuit (Integral version) and answer all the questions of the problem from its characteristics}
 
  • #6
To show that they are equal charges q1=q2
And
q=Cs^-1V
q=(C1^-1+C2^-1)V
(C1^-1+C2^-1)V=Cs^-1V
Cs^-1=C1^-1+C2^-1
 
  • #7
maulucci said:
To show that they are equal charges q1=q2
You did not show it, you just assumed it.

q=Cs^-1V
Why ^(-1)?

q=(C1^-1+C2^-1)V
How did you get that?

Your solution will need V1, V2 in some way...
 
  • #8
Ok

V=q/C
V=V1+V2
q/C=q/C1+q/C2
C^-1=C1^-1+C2^-1
 
  • #9
That is correct. You can argue that q1=q2 to satisfy charge conservation, or something similar.
 
  • #10
Ok thank you
 

1. What is a capacitor series circuit?

A capacitor series circuit is a type of electrical circuit where two or more capacitors are connected in a series, meaning that the positive terminal of one capacitor is connected to the negative terminal of another. This results in a single path for the current to flow.

2. How do you derive the relationship between capacitors in a series circuit?

The relationship between capacitors in a series circuit can be derived using the equation Cs = C1 + C2 + C3 + ..., where Cs is the total capacitance and C1, C2, C3, etc. are the individual capacitances of each capacitor. This means that the total capacitance of a series circuit is equal to the sum of the individual capacitances.

3. What happens to the total capacitance when capacitors are connected in a series?

When capacitors are connected in a series, the total capacitance decreases. This is because the individual capacitances are added together, resulting in a smaller total capacitance compared to just one capacitor on its own.

4. Can you explain the concept of equivalent capacitance in a series circuit?

Equivalent capacitance in a series circuit refers to the single value of capacitance that would have the same effect as the combination of multiple capacitors in the circuit. It is calculated using the formula 1/Cs = 1/C1 + 1/C2 + 1/C3 + ..., where Cs is the equivalent capacitance and C1, C2, C3, etc. are the individual capacitances.

5. What is the purpose of using capacitors in a series circuit?

Capacitors in a series circuit can be used for a variety of purposes, such as filtering out unwanted frequencies, smoothing out voltage fluctuations, and storing electrical energy. They can also be used to create a larger effective capacitance than what is available with a single capacitor.

Similar threads

  • Introductory Physics Homework Help
Replies
20
Views
378
  • Introductory Physics Homework Help
Replies
9
Views
305
  • Introductory Physics Homework Help
Replies
4
Views
758
  • Introductory Physics Homework Help
Replies
2
Views
819
  • Introductory Physics Homework Help
Replies
4
Views
2K
  • Introductory Physics Homework Help
Replies
5
Views
198
  • Introductory Physics Homework Help
Replies
11
Views
3K
  • Introductory Physics Homework Help
Replies
11
Views
883
  • Introductory Physics Homework Help
Replies
4
Views
2K
  • Introductory Physics Homework Help
Replies
11
Views
2K
Back
Top