Trying to make fuel vapor supply system

[Qaiphyx]

Originally posted this in the wrong section. What would be the most basic and solid way of doing this for a gasoline engine? I've thought about using a ultrasonic mister but I am afraid that there may be a potential for a spark, don't want to blow up. I've also tossed around the idea of heating the fuel to its evaporation temps, but not sure what the simplest way would be to do this. Any ideas?

 

[Spinnor]

Goggle fuel injection. See,

http://www.seriouswheels.com/2009/nopq/2009-Porsche-911-Carrera-and-Carrera-S-Coupe-and-Convertible-Cross-section-of-direct-fuel-injection-1280x960.htm

http://auto.howstuffworks.com/fuel-injection.htm

https://www.google.com/search?hl=en...e=UTF-8&sa=N&tab=iw&ei=jmATT_O2HOHv0gGo1pC_AwYou were looking for the most simple, it can be done with the most simple of carburetors, see,

https://www.google.com/search?tbm=i...96l0l11406l28l27l1l17l18l0l211l1163l4.4.1l9l0

 

[gschugjr]

Take and run your fuel pump back into the tank to agitate the fuel to produce vapor, and run a coil of copper tubing thru your fuel tank from the radiator to heat the fuel, use your vapor return to the intake after all the censors. Do not deactivate the injectors.

 

[gschugjr]

You may also add HHO to mix with the fuel vapor.

 

[alphy]

I would recommend approaching this problem with caution and thorough research. The use of fuel vapor in a supply system for a gasoline engine can be dangerous and requires careful consideration of potential hazards.

One option could be to use a fuel injection system that utilizes fine misting nozzles to create a vaporized fuel mixture. This method is commonly used in modern fuel injection systems and is a safer alternative to using an ultrasonic mister.

If heating the fuel is still a consideration, it is important to carefully regulate the temperature to avoid any potential for explosions. This could be achieved by using a heating element with a temperature control system.

In any case, it is crucial to conduct thorough testing and ensure that all safety measures are in place before implementing a fuel vapor supply system. It may also be beneficial to consult with experts in the field or seek guidance from a professional engineer to ensure the system is designed and implemented safely and effectively.