A/C Electromagnet: Safety & Uses Explained

In summary, the conversation discusses the use of an A/C version of an electromagnet and the potential risks involved. The article mentions using a variac to control the voltage and current going to the coil, which could prevent short circuits. The concept of impedance is also brought up, explaining how a coil can resist or impede a short circuit in an AC circuit. The number of turns in a wire coil can also affect its ability to resist or impede a short circuit. The conversation also touches on the use of coils in transformers and the importance of insulation between the coils.
  • #1
DkEnrgyFrk
10
0
I am looking at electromagnets and discovered an article using an A/C version.
What I am surprised by is that there is no mention of how the A/C is being used.
http://www.coolmagnetman.com/magacem.htm
Wouldn't someone creating this version of an electromagnet kill themselves?
There's no mention whether the author uses any kind of lamp or anything to control the power running into this thing.
If this thing was wired into an outlet, wouldn't a fuse at the main's blow?
 
Engineering news on Phys.org
  • #2
You forgot the part on that page which says "Connect up a variac to the coil so you can control the voltage and current going to it."

The variac is also called auto-transformer. They usually have a fuse which would blow if you try to short circuit it.
 
  • #3
I did read that wrong. I don't understand what that is yet, but I'm going to check wikipedia and see.

Why can a single coil like the one primary coil of a transformer have voltage applied to it without being a short circuit? Does the winding of wire create resistance? A transformer doesn't have any resistance attached to its primary coil does it?
 
  • #4
Coils are inductors whether in transformers, electromagnets or something else.

When you apply DC voltage to an inductor, it tries to create a magnetic field which creates a force to resist the rise of current. The higher the frequency of breaking on and off the circuit with DC voltage, the longer it takes for the current to rise. if the frequency is high enough, the current in inductor shall never be able to rise to become a short circuit.

For a standard inductor with L Henry inductance, connected across AC of frequency f Hz, the effective resistance is 2*PI*f*L ohms. This is also called reactance.
 
  • #5
DkEnrgyFrk said:
...Why can a single coil like the one primary coil of a transformer have voltage applied to it without being a short circuit? Does the winding of wire create resistance? A transformer doesn't have any resistance attached to its primary coil does it?

the primary winding will have a DC resistance maybe a few 10's of ohms or 100's of ohms

But in an AC circuit we don't so much look at that resistance value ... rather because its a coil ( an inductor) it has an impedance to the AC current flowing through it

DC circuit we call it resistance
AC circuit we call it impedance

its that impedance that stops a relatively low wire resistance from becoming a short circuit to the AC current

Do a google search on Impedance ( AC impedance) and have some fun learning :)

Dave
 
  • #6
That is absolutely amazing. Thanks for the replies.

How many wraps/turns of a wire constitutes a coil that can resist(DC)/impede(AC) a short circuit?
A 12 gauge wire can be connected to a 120v outlet and as long as there are enough turns, we have a transformer primary without short? And if I create another coil of wiring that's brought closer to it, with more turns, a higher voltage will be induced across it, becomes the secondary?
 
  • #7
Yea, I guess so. But the coils of the wire should be insulated from each other, that's important.
 

What is an A/C Electromagnet?

An A/C electromagnet is a type of electromagnet that uses alternating current (A/C) to create a magnetic field. It is made up of a coil of wire wrapped around a ferromagnetic core, and when electricity flows through the wire, a magnetic field is created.

How does an A/C Electromagnet work?

An A/C electromagnet works by using the principle of electromagnetic induction. When an alternating current flows through the wire, it creates a changing magnetic field, which in turn induces a current in nearby conductive materials. This allows A/C electromagnets to be used in a variety of applications, such as motors, generators, and transformers.

Are A/C Electromagnets safe to use?

Yes, A/C electromagnets are generally safe to use as long as they are used properly and according to safety guidelines. The strength of the magnetic field can vary depending on the amount of current flowing through the wire, so it is important to use caution and follow safety precautions when working with A/C electromagnets.

What are the uses of A/C Electromagnets?

A/C electromagnets have a wide range of uses, including in motors, generators, transformers, and speakers. They are also commonly used in industrial and manufacturing processes, such as lifting and moving heavy objects, separating materials, and welding. In addition, A/C electromagnets are used in scientific research and medical imaging technologies.

What are the benefits of using A/C Electromagnets?

There are several benefits to using A/C electromagnets, including their ability to create strong and precise magnetic fields, their versatility in various applications, and their efficiency in converting electrical energy into mechanical energy. A/C electromagnets are also more cost-effective and environmentally friendly compared to other types of electromagnets, such as permanent magnets.

Similar threads

  • Electrical Engineering
Replies
6
Views
2K
  • Electrical Engineering
Replies
6
Views
5K
  • Electrical Engineering
Replies
7
Views
13K
Replies
22
Views
2K
  • DIY Projects
Replies
23
Views
5K
  • Electrical Engineering
Replies
4
Views
3K
  • Electrical Engineering
Replies
4
Views
7K
  • Electrical Engineering
Replies
8
Views
2K
Replies
8
Views
3K
  • General Engineering
Replies
2
Views
8K
Back
Top