Register to reply

Bending moment of square tubing

by Brian Simpson
Tags: bending, moment, square, tubing
Share this thread:
Brian Simpson
#1
Sep26-13, 02:07 PM
P: 3
I have some square tubing 3x3x1/4" A36 that will be fixed on one end and free on the other the material 9' long how was I find the bending moment?
Phys.Org News Partner Engineering news on Phys.org
Student develops filter for clean water around the world
Developing the next evolution in underwater communication
Compact vibration harvester power supply with highest efficiency opens door to "fix-and-forget" sensor nodes
Travis_King
#2
Sep26-13, 02:20 PM
P: 811
Are you hanging stuff off of it? Bending from what?

You need the moment of inertia for that cross section, you need the distance from the stress plane to the central axis. and you need the forces that contribute to the bending. An understanding of the method by which the beam is joined at one end would make it more accurate, or you could assume it is rigid.
Brian Simpson
#3
Sep26-13, 02:27 PM
P: 3
yes I am just hanging "stuff" from the end of the beam. the actual beam is going to be 9' long lets just say rigid on one end we are going to suspend the load on the end of the beam

Travis_King
#4
Sep26-13, 04:52 PM
P: 811
Bending moment of square tubing

For deflection: http://www.engineeringtoolbox.com/ca...ms-d_1848.html

Here's a good reference: http://www.advancepipeliner.com/Reso...n_Formulae.pdf

Maybe this too: http://www.me.berkeley.edu/~lwlin/me...Deflection.pdf
SteamKing
#5
Sep26-13, 05:08 PM
Emeritus
Sci Advisor
HW Helper
Thanks
PF Gold
P: 6,272
Quote Quote by Brian Simpson View Post
I have some square tubing 3x3x14" A36 that will be fixed on one end and free on the other the material 9' long how was I find the bending moment?
It's not clear what you mean by 3x3x14" tubing. Perhaps you meant 3x3x1/4" tubing?
Brian Simpson
#6
Sep26-13, 09:27 PM
P: 3
Yes sorry 3x3x1/4"


Register to reply

Related Discussions
Need help with square tubing Mechanical Engineering 1
Square tubing dimensions Engineering Systems & Design 1
3x3 or 4x4 square tubing bending strength Mechanical Engineering 10
3x3 square tubing vs 4x2 square tubing Mechanical Engineering 2
2 square tubing Mechanical Engineering 16