How's is it possible for us to harness fusion energy?

In summary: Finally, we could also use the heat released from fusion to create steam and turn turbines to create power.
  • #1
Hypo
59
0
Hallo everyone!

I'd like to understand why is it that the sun can produce fusion energy with less heat then the required heat in our current reactors?

Fusion reactors produce 100M/Degrees to produce a few minutes of fusion where the sun uses only 10M degrees and still produces fusion? Why is that?


Hows is it possibile for us to harness that energy? how will reactors be able to converte that to electricity or any form of energy?

Hyp,
 
Physics news on Phys.org
  • #2
Hallo Hypo! :smile:
Hypo said:
… why is it that the sun can produce fusion energy with less heat then the required heat in our current reactors?

I think it's the containment problem …

the sun doesn't have any difficulty keeping the stuff in the reactor! :biggrin:
 
  • #3
No, it's a rate problem. The sun takes 10 billion years to use its fuel, i.e. uses 10-10 of its fuel per year. For a fusion reactor, we'd like that number to be tens of percent.
 
  • #4
With other numbers:
The sun releases about 40W/m^3 of fusion power in the core. The large volume of the sun gives a nice total amount of fusion power. However, for earth, it would mean that 1GWth would require ~25 million cubic meters of plasma. That is a cube with ~300m side length and impractical for power plants.

In addition, the sun has a very high pressure (due to gravity) inside - something which is not reproducible on earth. With the same temperature, the power output would be lower than the sun's by some orders of magnitude.
 
  • #5
Hypo said:
Hallo everyone!

I'd like to understand why is it that the sun can produce fusion energy with less heat then the required heat in our current reactors?

Fusion reactors produce 100M/Degrees to produce a few minutes of fusion where the sun uses only 10M degrees and still produces fusion? Why is that?


The above answers are all good, however I would like to point out that it boils down to the fact that fusion doesn't start to occur at a specific temperature. Due to quantum effects there is an absolutely tiny chance of two hydrogen atoms fusing together at room temperature. The hotter you get the hydrogen the harder the two collide with one another, which increases the chance that fusion will occur. (Up to a certain point, at which the chance with start to drop again)

Hows is it possibile for us to harness that energy? how will reactors be able to converte that to electricity or any form of energy?

Hyp,

Well, first we have to be able to produce a sustained reaction or chain of pulsed reactions that produce more power than they consume. We have to use power to get the magnetic fields, electric currents, and other things that are required to contain and heat the plasma. So figuring out how to do this efficiently is how we achieve fusion power.

As to how we harness this power once we achieve a net gain, there are several options. The simplest is to simply let the neutrons from the reactions heat water and use the steam to power a turbine, like many power plants do today.

Another option, if we can get fusion to work for the particular type of fuel it requires, is to use the actual kinetic energy of the ions after fusion and convert it to electric energy. A moving charge generates a magnetic field and we can use it to slow these ions down and generate a voltage/current in the process.
 

1. How does fusion energy work?

Fusion energy is the process of combining two or more atomic nuclei to form a heavier nucleus. This process releases a large amount of energy in the form of heat and light. In order for fusion to occur, the nuclei must overcome their mutual repulsion and fuse together. This is achieved by heating the atoms to extremely high temperatures and confining them using strong magnetic fields or powerful lasers.

2. What are the benefits of harnessing fusion energy?

Harnessing fusion energy has several potential benefits. It produces significantly more energy than traditional fossil fuels and does not produce harmful emissions or waste products. It also uses abundant fuel sources, such as hydrogen, which can be extracted from seawater. Additionally, fusion reactors are inherently safe and do not have the risk of a meltdown like nuclear fission reactors.

3. What are the challenges in harnessing fusion energy?

One of the main challenges in harnessing fusion energy is achieving the extreme temperatures and pressures needed for fusion to occur. This requires advanced technology and materials that can withstand these conditions. Another challenge is finding a way to sustain the fusion reaction for a long enough period of time to produce a net energy output.

4. Are there any current efforts to harness fusion energy?

Yes, there are several international projects and research initiatives focused on harnessing fusion energy. The most well-known is the ITER project, which is a collaboration between 35 countries to build the world's largest fusion reactor. There are also private companies, such as General Fusion and TAE Technologies, working on developing fusion energy technology.

5. When will fusion energy be available for practical use?

It is difficult to predict an exact timeline for when fusion energy will be available for practical use. While significant progress has been made in fusion research and technology, there are still many challenges to overcome. Some experts estimate that fusion energy may become a viable source of energy in the next few decades, while others believe it may take longer. Continued research and investment will be crucial in making fusion energy a reality.

Similar threads

  • High Energy, Nuclear, Particle Physics
Replies
11
Views
1K
  • High Energy, Nuclear, Particle Physics
Replies
4
Views
2K
  • High Energy, Nuclear, Particle Physics
Replies
1
Views
1K
  • High Energy, Nuclear, Particle Physics
Replies
13
Views
5K
Replies
3
Views
1K
  • High Energy, Nuclear, Particle Physics
Replies
4
Views
2K
  • High Energy, Nuclear, Particle Physics
Replies
15
Views
3K
  • Science Fiction and Fantasy Media
Replies
16
Views
2K
  • High Energy, Nuclear, Particle Physics
Replies
3
Views
1K
  • High Energy, Nuclear, Particle Physics
Replies
19
Views
3K
Back
Top