Uniform plank - Supporting force

In summary, theHomework Statement states that a uniform plank is supported by two equal 120 N forces at X and Y. The supporting force at Y then becomes 80 N.
  • #1
mybrohshi5
365
0

Homework Statement



A uniform plank is supported by two equal 120 N forces at X and Y. The support at X is then moved to Z (halfway to the plank center).

The supporting force at Y then becomes?

_____________________________
X...Z...c......Y

i tried to draw it above. The line is the plank, X and Y are the supports, Z is where X is moved to, and (c) is the center of the plank

The Attempt at a Solution



I came across this as i am studying for my test and i am a little lost.

The solution says to do this:

(240 N)(1/4L) = Fy(3/4L)

and the answer is 80 N

I am confused on where this solution comes from.

Any explaining would be very helpful :)

Thank you
 
Physics news on Phys.org
  • #2
Well start off with X and Y being at the ends. If the system is in equilibrium there, what should be the force acting at the center c?
 
  • #3
you are given the initial reactions; what must be the weight of the plank, and at what point does the resultant force of the plank's weight act?
 
  • #4
The force at the center would be (120N + 120N) = 240N correct?

Is the equation used for this dealing with torque?

thanks for the help
 
  • #5
mybrohshi5 said:
The force at the center would be (120N + 120N) = 240N correct?

Is the equation used for this dealing with torque?

thanks for the help

No, now you have the forces. So now you have force at the center. Now move X to Z (I don't know if you have that distance) and just take moments about any point. For example, take moments about the new position of X i.e. Z.
 
  • #6
I don't have the distance so i believe the plank length is considered L.

I am not sure what you mean by moment.

When you say moment do you mean Moment of force = Torque:[itex]\mathbf{\tau}= \mathbf{r} \times \mathbf{F}[/itex]
 
  • #7
the terms torque, moment, or moment of a force, are often used interchangeably.
 
  • #8
Oh ok thanks for the insight on that :)

does this seem right.

if i take the torque about point Z then

tcenter + ty = tz

(240N)(1/4L) + (Fy)(3/4L) = 0
 
  • #9
mybrohshi5 said:
Oh ok thanks for the insight on that :)

does this seem right.

if i take the torque about point Z then

tcenter + ty = tz

(240N)(1/4L) + (Fy)(3/4L) = 0

Watch your sign convention, if clockwise moments are +ve, then anticlockwise moments are -ve.
 
  • #10
Ok thank you :)
 

1. What is a uniform plank?

A uniform plank is a long, narrow piece of wood or metal that has the same thickness and width throughout its entire length.

2. What is a supporting force?

A supporting force is a force that acts in the opposite direction of an object's weight, preventing it from falling or sinking.

3. How is the supporting force calculated for a uniform plank?

The supporting force for a uniform plank is calculated by multiplying the weight of the plank by the distance from the point of support to the center of gravity of the plank.

4. What factors affect the supporting force of a uniform plank?

The supporting force of a uniform plank is affected by the weight of the plank, the distance between the point of support and the center of gravity, and the angle at which the plank is placed.

5. How can the supporting force be increased for a uniform plank?

The supporting force for a uniform plank can be increased by increasing the distance between the point of support and the center of gravity, or by using a stronger material for the plank.

Similar threads

  • Introductory Physics Homework Help
Replies
11
Views
1K
  • Introductory Physics Homework Help
Replies
3
Views
4K
  • Introductory Physics Homework Help
Replies
7
Views
2K
  • Introductory Physics Homework Help
Replies
25
Views
11K
Replies
6
Views
683
  • Introductory Physics Homework Help
2
Replies
66
Views
4K
  • Introductory Physics Homework Help
Replies
8
Views
2K
  • Introductory Physics Homework Help
Replies
17
Views
2K
  • Introductory Physics Homework Help
Replies
4
Views
1K
  • Introductory Physics Homework Help
Replies
2
Views
1K
Back
Top