Frequency data from this circuit

[nhrock3]

how to know in which frequency the current is maximal in each of those circuits?

what if the frequency range in these circuits
?

 

[berkeman]

how to know in which frequency the current is maximal in each of those circuits?

what if the frequency range in these circuits
?

Your circuits didn't post, and you didn't show your attempt at the solution yet. Maybe try again?

 

[nhrock3]

this is my circuits
http://i41.tinypic.com/15p018y.jpg

The maximum current draw will occur at the resonant frequency
http://en.wikipedia.org/wiki/RLC_circuit#Resonance_frequency
but what is the magnitude of that current
?

 

[vk6kro]

You still haven't tried to solve this.

A couple of useful facts:

1) in a series circuit, the current does not depend on the order of the components.

2) Resonance is when the reactance of the capacitor cancels out the reactance of the coil.

 

[DeeNos]

To determine the frequency at which the current is maximal in each of these circuits, you will need to analyze the frequency data and plot it on a graph. The frequency at which the current is maximal can be identified as the peak or highest point on the graph. You can also use mathematical equations or formulas specific to the circuit to calculate the frequency at which the current is maximal.

As for the frequency range in these circuits, it is important to have a clear understanding of the circuit design and components used. Different circuits may have different frequency ranges depending on their purpose and components. It is important to check the specifications of the circuit and ensure that the frequency range being used falls within its operating capabilities. If the frequency range is outside of the circuit's capabilities, it may result in inaccurate or unreliable data. Additionally, it is important to consider any external factors that may affect the frequency range, such as interference or noise. Overall, careful analysis and understanding of the circuit design and components is necessary to accurately determine the frequency range in these circuits.